Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 19 Nov 2018, Vignesh R wrote:

> When performing single ended measurements with TSCADC, its recommended
> to set negative input (SEL_INM_SWC_3_0) of ADC step to ADC's VREFN in the
> corresponding STEP_CONFIGx register.
> Also, the positive(SEL_RFP_SWC_2_0) and negative(SEL_RFM_SWC_1_0)
> reference voltage for ADC step needs to be set to VREFP and VREFN
> respectively in STEP_CONFIGx register.
> Without these changes, there may be variation of as much as ~2% in the
> ADC's digital output which is bad for precise measurement.
> 
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
> ---
>  drivers/iio/adc/ti_am335x_adc.c      | 5 ++++-

>  include/linux/mfd/ti_am335x_tscadc.h | 4 ++++

Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux