Deny autoidle for hwmods with the OCPIF_SWSUP_IDLE flag,
that makes hwmods working properly which cannot handle
autoidle properly in lower power states.
Affected is e. g. the omap_hdq.
Since an ick might have mulitple users, autoidle is disabled
when an individual user requires that rather than in
_setup_iclk_autoidle. dss_ick is an example for that.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
Comments to v1 to this patch were worked into a new 2/3
---
arch/arm/mach-omap2/omap_hwmod.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 083dcd9942ce..3a86ba414973 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1002,8 +1002,10 @@ static int _enable_clocks(struct omap_hwmod *oh)
clk_enable(oh->_clk);
list_for_each_entry(os, &oh->slave_ports, node) {
- if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+ if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
+ omap2_clk_deny_idle(os->_clk);
clk_enable(os->_clk);
+ }
}
/* The opt clocks are controlled by the device driver. */
@@ -1055,8 +1057,10 @@ static int _disable_clocks(struct omap_hwmod *oh)
clk_disable(oh->_clk);
list_for_each_entry(os, &oh->slave_ports, node) {
- if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+ if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
clk_disable(os->_clk);
+ omap2_clk_allow_idle(os->_clk);
+ }
}
if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
@@ -2425,9 +2429,13 @@ static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
continue;
if (os->flags & OCPIF_SWSUP_IDLE) {
- /* XXX omap_iclk_deny_idle(c); */
+ /*
+ * we might have multiple users of one iclk with
+ * different requirements, disable autoidle when
+ * the module is enabled, e.g. dss iclk
+ */
} else {
- /* XXX omap_iclk_allow_idle(c); */
+ /* we are enabling autoidle afterwards anyways */
clk_enable(os->_clk);
}
}
--
2.11.0
