On 30/11/18 15:38, H. Nikolaus Schaller wrote: > Hi Roger, > >> Am 30.11.2018 um 13:40 schrieb Roger Quadros <rogerq@xxxxxx>: >> >> Nikolaus, >> >> On 29/11/18 12:00, H. Nikolaus Schaller wrote: >>> Hi, >>> I finally got some USB3 OTG cable (said to be compatible with Samsung Galaxy Note 3). >>> Unfortunately devices do not enumerate (don't show up in lsusb -t) and don't even >>> fall back to USB2 speed. >>> If I use a pure USB2 OTG cable all devices work in USB2 mode. >>> >>> This is all the same on OMAP5EVM and Pyra. >>> >>> Is this known or does USB3-OTG work for someone? >> >> I can give it a try. Do you have any patches to enable the VBUS regulator on omap5-uevm? > > I think everything is already upstream and I have not used a special patch for it. > See extcon_usb3 and &usb in omap5-board-common.dtsi. This seems to connect the ID pin to the smps10. > > The dwc3 role patch is also upstream > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v4.20-rc4&id=656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f > > so that it should work out of the box for USB2 (or 3) with mainline kernel > Unless I did miss something important I am not aware of. I think I found the problem. Can you please try with the below patch? Super-speed host works for me [1]. diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index bf7ca00..bc853eb 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -701,6 +701,7 @@ }; &dwc3 { + extcon = <&extcon_usb3>; dr_mode = "otg"; }; cheers, -roger [1] [ 115.105743] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 115.111384] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 115.120903] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 115.130545] xhci-hcd xhci-hcd.2.auto: irq 166, io mem 0x4a030000 [ 115.139082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 115.147491] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 115.154783] usb usb3: Product: xHCI Host Controller [ 115.159757] usb usb3: Manufacturer: Linux 4.20.0-rc1-00048-gd8e2769-dirty xhci-hcd [ 115.167401] usb usb3: SerialNumber: xhci-hcd.2.auto [ 115.173794] hub 3-0:1.0: USB hub found [ 115.177959] hub 3-0:1.0: 1 port detected [ 115.183078] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 115.188707] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 115.196513] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 115.203304] omap-dwc3 4a020000.omap_dwc3: mailbox: VBUS valid [ 115.209465] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 115.218228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 [ 115.226691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 115.234052] usb usb4: Product: xHCI Host Controller [ 115.239118] usb usb4: Manufacturer: Linux 4.20.0-rc1-00048-gd8e2769-dirty xhci-hcd [ 115.246871] usb usb4: SerialNumber: xhci-hcd.2.auto [ 115.252711] hub 4-0:1.0: USB hub found [ 115.256697] hub 4-0:1.0: 1 port detected [ 115.626660] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 115.662809] usb 4-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00 [ 115.671093] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 115.678346] usb 4-1: Product: Mass Storage Device [ 115.683082] usb 4-1: Manufacturer: JetFlash [ 115.687362] usb 4-1: SerialNumber: 04NWK12LVFGUCOCZ [ 115.696634] usb-storage 4-1:1.0: USB Mass Storage device detected [ 115.703795] scsi host1: usb-storage 4-1:1.0 [ 117.070850] scsi 1:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6 [ 117.082607] sd 1:0:0:0: [sda] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB) [ 117.091254] sd 1:0:0:0: [sda] Write Protect is off [ 117.097436] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 117.113372] sda: sda1 sda2 sda3 [ 117.121578] sd 1:0:0:0: [sda] Attached SCSI removable disk root@rockdesk:~# lsusb -t /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=stor., Driver=usb-storage, 5000M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/3p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-omap/3p, 480M |__ Port 2: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M |__ Port 3: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
