Nikolaus, On 29/11/18 12:00, H. Nikolaus Schaller wrote: > Hi, > I finally got some USB3 OTG cable (said to be compatible with Samsung Galaxy Note 3). > Unfortunately devices do not enumerate (don't show up in lsusb -t) and don't even > fall back to USB2 speed. > If I use a pure USB2 OTG cable all devices work in USB2 mode. > > This is all the same on OMAP5EVM and Pyra. > > Is this known or does USB3-OTG work for someone? I can give it a try. Do you have any patches to enable the VBUS regulator on omap5-uevm? > Is this repeatable or just a problem of my setup (e.g. bad cables)? At least on dra7-evm I had a lot of trouble with many of the 3.0 OTG cables. The one I have working doesn't ground the ID pin. But I can use the J10 jumper to manually ground ID on the omap5-uevm. > Is there a fix? > > BR and thanks, > Nikolaus > cheers, -roger -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
