This adds support for networking over USB device, which allows boards such as the BeagleBoneBlack Wireless and Pocket Beagle to boot on an NFS root filesystem. Such boards have no Ethernet port. This is for consistency with CONFIG_ROOT_NFS=y which makes no sense if there is no networking. Tested on BeagleBoneBlack Wireless and BeagleBoneBlack Signed-off-by: Michael Opdenacker <michael.opdenacker@xxxxxxxxxxx> --- arch/arm/configs/omap2plus_defconfig | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 6491419b1dad..7e8a8ed028fd 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -403,11 +403,11 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=m -CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_TUSB6010=m +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_TUSB6010=y CONFIG_USB_MUSB_OMAP2PLUS=m CONFIG_USB_MUSB_AM35X=m -CONFIG_USB_MUSB_DSPS=m +CONFIG_USB_MUSB_DSPS=y CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TUSB_OMAP_DMA=y @@ -418,10 +418,10 @@ CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m -CONFIG_NOP_USB_XCEIV=m -CONFIG_AM335X_PHY_USB=m +CONFIG_NOP_USB_XCEIV=y +CONFIG_AM335X_PHY_USB=y CONFIG_TWL6030_USB=m -CONFIG_USB_GADGET=m +CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y @@ -442,6 +442,7 @@ CONFIG_USB_CONFIGFS_F_UAC1=y CONFIG_USB_CONFIGFS_F_UAC2=y CONFIG_USB_CONFIGFS_F_MIDI=y CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_ETH=y CONFIG_USB_ZERO=m CONFIG_USB_G_NOKIA=m CONFIG_MMC=y -- 2.17.1
