Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/11/2018 18:05, Nishanth Menon wrote:
On 11:31-20181113, Vignesh R wrote:
The dt-bindings header for TI K3 AM6 SoCs define a set of macros for
defining pinmux configs in human readable form, instead of raw-coded
hex values.

Signed-off-by: Vignesh R <vigneshr@xxxxxx>
---
  MAINTAINERS                      |  1 +
  include/dt-bindings/pinctrl/k3.h | 35 ++++++++++++++++++++++++++++++++
  2 files changed, 36 insertions(+)
  create mode 100644 include/dt-bindings/pinctrl/k3.h

diff --git a/MAINTAINERS b/MAINTAINERS
index fa45ff36fde9..1574ad6d7ead 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2204,6 +2204,7 @@ S:	Supported
  F:	Documentation/devicetree/bindings/arm/ti/k3.txt
  F:	arch/arm64/boot/dts/ti/Makefile
  F:	arch/arm64/boot/dts/ti/k3-*
+F:	include/dt-bindings/pinctrl/k3.h
ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
  M:	Santosh Shilimkar <ssantosh@xxxxxxxxxx>
diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
new file mode 100644
index 000000000000..463d845a9b36
--- /dev/null
+++ b/include/dt-bindings/pinctrl/k3.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for pinctrl bindings for TI's K3 SoC
+ * family.
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
+#define _DT_BINDINGS_PINCTRL_TI_K3_H
+
+#define PULLUDEN_SHIFT		(16)
+#define PULLTYPESEL_SHIFT	(17)
+#define RXACTIVE_SHIFT		(18)
+
+#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
+#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
+
+#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+
+#define INPUT_EN		(1 << RXACTIVE_SHIFT)
+#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
+
+/* Only these macros are expected be used directly in device tree files */
+#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)


Thanks for reducing the combinations down to the minimum needed. We can
worry about the DS and isolation bits when we have a real user for them.

Acked-by: Nishanth Menon <nm@xxxxxx>

Tero: v4.21-rc1 perhaps ?


Yeah, looks fine, queueing up for 4.21.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux