Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
arch/arm/boot/dts/dra7-l4.dtsi | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 7e5c0d4f..7070095 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -77,18 +77,18 @@
};
};
+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,dra7xx-phy-gmii-sel";
+ reg = <0x554 0x4>;
+ #phy-cells = <1>;
+ };
+
scm_conf_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
};
- phy_sel: cpsw-phy-sel@554 {
- compatible = "ti,dra7xx-cpsw-phy-sel";
- reg= <0x554 0x4>;
- reg-names = "gmii-sel";
- };
-
dra7_pmx_core: pinmux@1400 {
compatible = "ti,dra7-padconf",
"pinctrl-single";
@@ -3060,7 +3060,6 @@
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0 0 0x4000>;
syscon = <&scm_conf>;
- cpsw-phy-sel = <&phy_sel>;
status = "disabled";
davinci_mdio: mdio@1000 {
@@ -3075,11 +3074,13 @@
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
};
cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
};
};
};
--
2.10.5
