TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
The interface mode is selected by configuring the MII mode selection register(s)
(GMII_SEL) in the System Control Module chapter (SCM).
+--------------+
+-------------------------------+ |SCM |
| CPSW | | +---------+ |
| +--------------------------------+gmii_sel | |
| | | | +---------+ |
| +----v---+ +--------+ | +--------------+
| |Port 1..<--+-->GMII/MII<------->
| | | | | | |
| +--------+ | +--------+ |
| | |
| | +--------+ |
| | | RMII <------->
| +--> | |
| | +--------+ |
| | |
| | +--------+ |
| | | RGMII <------->
| +--> | |
| +--------+ |
+-------------------------------+
GMII_SEL register(s) and bit fields placement in SCM are different between SoCs
while fields meaning is the same. GMII_SEL(s) allows to select -
Port GMII/MII/RMII/RGMII Mode; RGMII Internal Delay Mode (SoC dependant) and
RMII Reference Clock Output mode (SoC dependant).
Historically CPSW external Port's interface mode selection configuartion was
introduced using custom driver and API cpsw-phy-sel.c.
This leads to unnecessary driver, DT binding and custom API support effort.
Moreover, even definition of cpsw-phy-sel node in DTs is logically incorrect [1]
mac: ethernet@4a100000 {
compatible = "ti,am4372-cpsw","ti,cpsw";
...
phy_sel: cpsw-phy-sel@44e10650 {
compatible = "ti,am43xx-cpsw-phy-sel";
reg= <0x44e10650 0x4>;
reg-names = "gmii-sel";
};
};
This series replaces custom CPSW Port interface selection implementation
(cpsw-phy-sel.c) with well defined Linux PHY framework interface instead.
It introduces CPSW Port's PHY Interface Mode selection Driver (phy-gmii-sel)
which implements standard Linux PHY interface. The phy-gmii-sel PHY device
should defined as child device of SCM node (scm_conf) and can be attached to
each CPSW port node using standard PHY bindings (cell 1 - port number,
cell 2 - RMII refclk mode).
scm_conf: scm_conf@0 {
compatible = "syscon", "simple-bus";
gmii_sel_phy: cpsw-sel-netif {
compatible = "ti,am43xx-gmii-sel-phy";
syscon-scm = <&scm_conf>;
#phy-cells = <2>;
};
};
mac: ethernet@4a100000 {
compatible = "ti,am4372-cpsw","ti,cpsw";
cpsw_emac0: slave@4a100200 {
phy-mode = "rgmii";
phys = <&gmii_sel_phy 1 0>;
};
};
The CPSW driver requests phy-gmii-sel PHY for each external port and uses
recently introduced PHY API phy_set_mode_ext() [1] for port interface mode
selection when netdev is opened.
slave->data->gmii_sel_phy = devm_of_phy_get(&pdev->dev, port_node, NULL);
slave->data->phy_if = of_get_phy_mode(port_node);
cpsw_ndo_open()
phy_set_mode_ext(slave->data->gmii_sel_phy, PHY_MODE_ETHERNET, slave->data->phy_if);
Note. CPSW Port interface has to be reconfigured every time netdev is opened for
proper System Suspend support where CPSW can lose context.
[1] https://patchwork.kernel.org/cover/10689739/
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Grygorii Strashko (10):
dt-bindings: phy: add cpsw port interface mode selection phy bindings
phy: ti: introduce phy-gmii-sel driver
dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
net: ethernet: ti: cpsw: add support for port interface mode selection
phy
ARM: dts: dra7: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: am335x: switch to use phy-gmii-sel
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
.../devicetree/bindings/net/cpsw-phy-sel.txt | 2 +-
Documentation/devicetree/bindings/net/cpsw.txt | 8 +-
.../devicetree/bindings/phy/ti-phy-gmii-sel.txt | 68 ++++
arch/arm/boot/dts/am335x-baltos-ir2110.dts | 4 -
arch/arm/boot/dts/am335x-baltos-ir3220.dts | 4 -
arch/arm/boot/dts/am335x-baltos-ir5221.dts | 4 -
arch/arm/boot/dts/am335x-chiliboard.dts | 4 -
arch/arm/boot/dts/am335x-icev2.dts | 4 -
arch/arm/boot/dts/am335x-igep0033.dtsi | 4 -
arch/arm/boot/dts/am335x-lxm.dts | 4 -
arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 5 -
arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 5 -
arch/arm/boot/dts/am335x-phycore-som.dtsi | 4 -
arch/arm/boot/dts/am33xx-l4.dtsi | 15 +-
arch/arm/boot/dts/am437x-l4.dtsi | 17 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 5 +-
arch/arm/boot/dts/dm814x.dtsi | 15 +-
arch/arm/boot/dts/dra7-l4.dtsi | 15 +-
drivers/net/ethernet/ti/Kconfig | 6 +-
drivers/net/ethernet/ti/cpsw.c | 19 +-
drivers/net/ethernet/ti/cpsw.h | 6 +
drivers/phy/ti/Kconfig | 10 +
drivers/phy/ti/Makefile | 1 +
drivers/phy/ti/phy-gmii-sel.c | 349 +++++++++++++++++++++
24 files changed, 498 insertions(+), 80 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
create mode 100644 drivers/phy/ti/phy-gmii-sel.c
--
2.10.5
