Hi,
* Roger Quadros <rogerq@xxxxxx> [181122 11:39]:
> From: Suman Anna <s-anna@xxxxxx>
> +Example:
> +========
> +1. /* AM33xx PRU-ICSS */
> + pruss_soc_bus: pruss_soc_bus@4a326004 {
> + compatible = "ti,am3356-pruss-soc-bus";
> + ti,hwmods = "pruss";
> + reg = <0x4a326004 0x4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
The top level interconnect target module driver should be just ti-sysc
as documented in Documentation/devicetree/bindings/bus/ti-sysc.txt.
AFAIK there is nothing PRU specific there. So let's not add yet
another custom interconnect target module handling code to deal with.
I also posted a patch a while back for using reset-simple with
ti-sysc as "[PATCHv2] reset: ti-rstctrl: use the reset-simple driver".
> + pruss_cfg: cfg@4a326000 {
> + compatible = "syscon";
> + reg = <0x4a326000 0x2000>;
> + };
> +
> + pruss_iep: iep@4a32e000 {
> + compatible = "syscon";
> + reg = <0x4a32e000 0x31c>;
> + };
> +
> + pruss_mii_rt: mii_rt@4a332000 {
> + compatible = "syscon";
> + reg = <0x4a332000 0x58>;
> + };
Hmm what are these syscon register actually doing? Sseems like
they should be just handled by a phy driver nowadays?
Other than that the binding looks OK to me. Good to finally
see some activity in getting the PRU support merged :)
Regards,
Tony
