Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Nov 22, 2018 at 10:31:31AM +0200, Peter Ujfalusi wrote:
> On 20/11/2018 23.04, Aaro Koskinen wrote:
> > On Tue, Nov 20, 2018 at 09:28:37AM +0200, Peter Ujfalusi wrote:
> >> On 19/11/2018 20.46, Aaro Koskinen wrote:
> >>> On Mon, Nov 19, 2018 at 12:40:40PM +0200, Peter Ujfalusi wrote:
> >>>> When the channel is configured for slave operation the LCH_TYPE needs to be
> >>>> set to LCh-P. For memcpy channels the LCH_TYPE must be set to LCh-2D.
> >>>>
> >>>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> >>>
> >>> I don't have the documentation, but based on what omap_udc driver (still
> >>> using the legacy OMAP DMA API) does this seems to be correct.
> >>
> >> They are hard to fine, true. From the omap1710 TRM:
> >>
> >> Logical channel types (LCh types) supported are:
> >> - LCh-2D for nonsynchronized transfers (memory transfers, 1D and 2D)
> >> - LCh-P for synchronized transfers (mostly peripheral transfers)
> >> - LCh-PD similar to LCh-P but runs on a dedicated physical channel
> >> - LCh-G for graphical transfers/operations
> >> - LCh-D for display transfers
> > 
> > (I found a public document "OMAP5912 Multimedia Processor Direct
> > Memory Access (DMA) Support Reference Guide", documenting these; easy
> > to confuse with "OMAP5910 Dual-Core Processor System DMA Controller
> > Reference Guide".)
> > 
> >> Looking at other part it looks like hat LCH-2D channel mode can happily
> >> service a peripheral. LCH-P supports the same features as LCH-2D, but it
> >> lacks support for Single/Double-indexed addressing mode on the
> >> peripheral port side.
> >>
> >> So, this patch might not be needed at all. Can you test the omap_udc
> >> with s/OMAP_DMA_LCH_P/OMAP_DMA_LCH_2D
> >>
> >> If USB works, then we can just drop this patch.
> > 
> > Unfortunately omap_udc does not seem to work at all anymore with DMA on
> > my 770 setup. :-(
> > 
> > I had switched to PIO mode in 2015 since the WARNs about legacy DMA
> > API were too annoying and flooding the console. And now that I tried
> > using DMA again with g_ether, it doesn't work anymore. The device get's
> > recognized on host side, but no traffic goes through. Switching back to
> > PIO makes it to work again.
> 
> After some tinkering I got omap_udc working with DMA (not DMAengine,
> yet) on 770 - using nfsroot. Configuring the channels to OMAP_DMA_LCH_2D
> works as expected.

Would be interesting to know how you got it working with DMA. Which
gadget driver were you using?

I bisected my issue, and got:

commit 387f869d2579e379ee343f5493dcd360be60f5c6 (refs/bisect/bad)
Author: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Date:   Wed Mar 22 13:25:18 2017 +0200

    usb: gadget: u_ether: conditionally align transfer size

With that reverted, the DMA works OK (and I can also now confirm that
OMAP_DMA_LCH_2D works). I haven't yet checked if we actually need that
quirk in OMAP UDC, or if this is related to RMK's findings of potential
bugs in the driver. Anyway, there is clearly yet another regression.

A.



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux