Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v10 4/7] MFD: TWL4030: power scripts for OMAP3 boards
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v10 1/7] MFD: TWL4030: Fix for the TWL4030 sleep/wakeup sequence
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v10 2/7] MFD: TWL4030: Correct the warning print during script loading
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v10 0/7] MFD: TWL4030: power script and workaround for erratum 27
  • From: Lesly A M <leslyam@xxxxxx>
• Re: [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 0/2] OMAP2+: hwmod: Add hwmod's API's for pad wakeup
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 2/2] OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH V2 16/16] mmc: omap_hsmmc: add a hardware reset before initialization
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 14/16] mmc: omap_hsmmc: adjust host controller clock in regard to current OPP
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH V2 13/16] OMAP: hsmmc: implement clock switcher
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 08/16] mmc: omap_hsmmc: split same pieces of code to separate functions
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 09/16] OMAP: hsmmc: Do not mux the slot if non default muxing is already done
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 00/16] omap_hsmmc patches
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 03/16] mmc: omap_hsmmc: move hardcoded frequency constants to definition block
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 01/16] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 15/16] OMAP: hsmmc: add platform data for eMMC hardware reset gpio
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 02/16] mmc: omap_hsmmc: correct debug report error status mnemonics
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 05/16] mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 06/16] mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 07/16] mmc: omap_hsmmc: fix few bugs when set the clock divisor
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 12/16] mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 10/16] OMAP: board-rm680: set MMC nomux flag
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 08/22] mmc: omap_hsmmc: correct debug report error status mnemonics
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: Common clock and dvfs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/22] OMAP: sDMA: descriptor autoloading feature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] OMAP: DSS2: Remove usage of struct dispc_reg
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 2/3] OMAP: DSS2: Clean up DISPC overlay manager register definitions
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/3] OMAP: DSS2: Clean up DISPC overlay register definitions
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 0/3] OMAP: DSS2: DISPC register definition clean up
  • From: Archit Taneja <archit@xxxxxx>
• Re: Common clock and dvfs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Common clock and dvfs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/4] OMAP3: cpuidle: re-organize the C-states data
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: DSS pm_runtime problem
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: DSS pm_runtime problem
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: DSS pm_runtime problem
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Module + offset calculations have to be signed in arch/arm/mach-omap2/pm-debug.c
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• DSS pm_runtime problem
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/4] OMAP3: cpuidle: change the power domains modes determination logic
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/4] OMAP3: cpuidle: code rework for improved readability
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/4] OMAP3: cpuidle: re-organize the C-states data
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/4] OMAP3: clean-up mach specific cpuidle data structures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v2 0/4] OMAP: cpuidle code clean-up
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: Common clock and dvfs
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/10] OMAP4 : DSS2 : HDMI: Dispc gamma enable set/reset function for TV.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 19/22] OMAP: hsmmc: implement clock switcher
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 07/22] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/22] mmc: omap_hsmmc: fix few bugs when set the clock divisor
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 22/22] mmc: omap_hsmmc: add a hardware reset before initialization
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 18/22] mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 21/22] OMAP: hsmmc: add platform data for eMMC hardware reset gpio
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 17/22] mmc: omap_hsmmc: ensure pbias configuration is always done
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 19/22] OMAP: hsmmc: implement clock switcher
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 20/22] mmc: omap_hsmmc: adjust host controller clock in regard to current OPP
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 14/22] mmc: omap_hsmmc: split same pieces of code to separate functions
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 10/22] mmc: omap_hsmmc: reduce a bit the error handlers in probe()
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 13/22] mmc: omap_hsmmc: fix few bugs when set the clock divisor
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 09/22] mmc: omap_hsmmc: move hardcoded frequency constants to definition block
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 08/22] mmc: omap_hsmmc: correct debug report error status mnemonics
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 06/22] mmc: omap_hsmmc: limit scatterlist size for sDMA autoloading
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 11/22] mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 07/22] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 12/22] mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 16/22] OMAP: board-rm680: set MMC nomux flag
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 15/22] OMAP: hsmmc: Do not mux the slot if non default muxing is already done
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 03/22] OMAP: DMA: Ensure the sglist registers are cleared
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 01/22] OMAP: sDMA: descriptor autoloading feature
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 04/22] mmc: omap hsmmc: adaptation of sdma descriptor
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 02/22] OMAP: DMA: add omap_dma_has_sglist()
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 05/22] mmc: omap_hsmmc: fix dma sglist use
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 00/22] omap_hsmmc patches
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [Q] USB OTG host
  • From: Mohamed Thalib H <hmthalib@xxxxxxxxx>
• Re: Is there boot logo support for OMAP3530?
  • From: Mohamed Thalib H <hmthalib@xxxxxxxxx>
• Re: [PATCH] arm: omap3: cm-t35: add support for cm-t3730
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: [PATCH v2 5/7] OMAP: DSS: Adding initialization routine to picodlp panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] arm: omap3: cm-t35: add support for cm-t3730
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] OMAP: DSS2: Add new color formats
  • From: Amber Jain <amber@xxxxxx>
• Re: [Patch v1] AM35xx-Craneboard:Update
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [Patch v1] AM35xx-Craneboard:Update
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• RE: [PATCH] rtc-twl: Switch to using threaded irq
  • From: <ilkka.koskinen@xxxxxxxxx>
• [PATCH 3/5] OMAP4: DSS2: HDMI: Add enums and structures for audio
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 4/5] OMAP4: DSS2: HDMI: Add functionality for audio configuration
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 5/5] OMAP4: DSS2: HDMI: Implement ASoC Codec driver for HDMI audio
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 2/5] OMAP4: DSS2: HDMI: Add DSS feature for CTS calculation
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 1/5] OMAP4: DSS2: Create a DSS features structure for OMAP4430 ES1.0
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 0/5] OMAP4: DSS2: HDMI: Add support for audio
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• Re: Common clock and dvfs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: Common clock and dvfs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Common clock and dvfs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Common clock and dvfs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: Common clock and dvfs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• [PATCH] ARM: omap4: Enable keypad controller hwmod
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/5] OMAP3: clean-up mach specific cpuidle data structures
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: omap2plus: fix ads7846 pendown gpio request
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] OMAP3: cpuidle: code rework for improved readability
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/4] omap: consolidate touch screen initialization among different boards
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] arm: omap2plus: fix ads7846 pendown gpio request
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] omap: consolidate touch screen initialization among different boards
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/2 v5] twl4030-madc driver
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• RE: [PATCH v2 5/7] OMAP: DSS: Adding initialization routine to picodlp panel
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• RE: [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• Re: [PATCH v9 0/9] OMAP3: PM: TWL4030 power scripts and workaround for TWL erratum 27
  • From: "Manuel, Lesly Arackal" <leslyam@xxxxxx>
• [Q] USB OTG host
  • From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
• Re: [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] OMAP: OMAPFB: Remove unused lcd drivers
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] OMAP PM: early init of the pwrdms states
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 7/8] OMAP: PM CONSTRAINTS: implement wake-up latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 6/8] OMAP2+: omap_device: implement the constraints management code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/8] OMAP: PM CONSTRAINTS: add an enum for the classes of constraint
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/8] OMAP2+: omap_hwmod: manage the omap_devices the wake-up latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/8] OMAP3: powerdomain data: add wake-up latency figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/8] OMAP2+: powerdomain: control power domains next state
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v4 0/8] OMAP: add PM_CONSTRAINTS framework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] OMAP: OMAPFB: Remove unused lcd drivers
  • From: Steve Sakoman <steve@xxxxxxxxxxx>
• [PATCH 1/7] OMAP: OMAPFB: Remove unused lcd drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/7] OMAP: omap3touchbook: Remove unused lcd stuff
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• [PATCH 7/7] OMAP: Apollon: Port the display driver to new DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/7] OMAP: LDP: Port the display driver to new DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 6/7] OMAP: H4: Port the display driver to new DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/7] OMAP: 2420SDP: Port the display driver to new DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/7] OMAP: RX51: Remove unused old omapfb stuff
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/7] OMAP: DSS: porting old drivers to DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] OMAP: twl4030-power: In remove script check the error condition after i2cwrite
  • From: Lesly Arackal Manuel <leslyam@xxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Archit Taneja <archit@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: Is there boot logo support for OMAP3530?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Vladimir Pantelic <vladoman@xxxxxxxxx>
• Re: [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• Re: [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] About ARM expansion boards and others things
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2 3/7] OMAP: DSS: Adding a picodlp panel driver
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• Is there boot logo support for OMAP3530?
  • From: Mohamed Thalib H <hmthalib@xxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/9] OMAP: DSS2: Taal: Use device name in backlight_device_register
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 8/9] OMAP: DSS2: DSI: Build a platform device instance for DSI2
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 7/9] OMAP4: DSS2: DSI: Changes for DSI2 on OMAP4
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 6/9] OMAP: DSS2: DSI: Pass pointer to struct to packet_sent_handler isrs
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 5/9] OMAP: DSS2: DSI: Use platform_device pointer to get dsi data
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 4/9] OMAP: DSS2: Pass platform_device as an argument in dsi functions
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 3/9] OMAP: DSS2: Remove omap_dss_device argument from dsi_pll_init()
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 2/9] OMAP: DSS2: DSI: Add extra omap_dss_device argument in functions exported by dsi
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/9] OMAP: DSS2: Change DSI platform device name from "omapdss_dsi1" to "omapdss_dsi"
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 0/9] MAP: DSS2: DSI2 for secondary lcd panel on OMAP4
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2 v5] twl4030-madc driver
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH 0/2 v5] twl4030-madc driver
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] omap: consolidate touch screen initialization among different boards
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 0/9] OMAP: GPIO: cleanup, consolidation, etc. (v2)
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/2 v5] twl4030-madc driver
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH v2 0/7] picodlp projector driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 5/7] OMAP: DSS: Adding initialization routine to picodlp panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/7] OMAP: DSS: Adding a header file for picodlp panel data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 3/7] OMAP: DSS: Adding a picodlp panel driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] Staging: Westbridge: replace custom debug macros with pr_...() macros
  • From: Greg KH <greg@xxxxxxxxx>
• [RFC] About ARM expansion boards and others things
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/9] OMAP: GPIO: cleanup, consolidation, etc. (v2)
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 03/12] ARM: omap4: use remapped PPI interrupts for local timer
  • From: Marc Zyngier <Marc.Zyngier@xxxxxxx>
• Re: [PATCH] arm: omap3: cm-t3517: fix section mismatch warning
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH v2] arm: omap2plus: GPIO cleanup
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2 v5] twl4030-madc driver
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH v9 0/9] OMAP3: PM: TWL4030 power scripts and workaround for TWL erratum 27
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Initial B&N Nook Color (encore) support.
  • From: Vladimir Pantelic <vladoman@xxxxxxxxx>
• [PATCH] omap : nand : fix subpage ecc issue with prefetch
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• Re: [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v3 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH v3 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH v3 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH v3 0/2] omap3isp/rx-51: Add vdds_csib regulator handling
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] omap: cleanup board files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 1/2] Initial B&N Nook Color (encore) support.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] omap: musb: introduce default board config
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 0/2] OMAP: DSS: Support new dpi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: smsc911x: regression on overo platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 1/2] OMAP: DSS2: Support for Seiko 70WVW1TZ3
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• [PATCHv2 2/2] OMAP: DSS2: Support for Powertip PH480272T
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• [PATCHv2 0/2] OMAP: DSS: Support new dpi panels
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: DSS: Support new dpi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: smsc911x: regression on overo platform
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: <kalle.jokiniemi@xxxxxxxxx>
• WARNING: at handle_irq_event_percpu
  • From: AJ ONeal <coolaj86@xxxxxxxxx>
• [PATCH v2 6/7] OMAP4: DSS: Adding a picodlp in OMAP4430 SDP board file
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 5/7] OMAP: DSS: Adding initialization routine to picodlp panel
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 2/7] OMAP: DSS: Adding a picodlp panel header file
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 1/7] OMAP: DSS: Adding a header file for picodlp panel data
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 0/7] picodlp projector driver
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 7/7] OMAP4: DSS: Adding picodlp panel entry in Kconfig and Makefile
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 4/7] OMAP: DSS: Add i2c client driver for picodlp
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• [PATCH v2 3/7] OMAP: DSS: Adding a picodlp panel driver
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• smsc911x: regression on overo platform
  • From: Matthias Scheer <scheer@xxxxxxxxx>
• [Patch v2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• [Patch v2] AM35xx-Craneboard:Display: Add DVI and TV Support
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/4] omap: cleanup board files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] omap: cleanup board files
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• RE: [PATCH 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 2/2] OMAP: DSS2: Support for Powertip PH480272T
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• [PATCH 1/2] OMAP: DSS2: Support for Seiko 70WVW1TZ3
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• [PATCH 0/2] OMAP: DSS: Support new dpi panels
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• Re: USB-ehci enumeration issue
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb: am35x: fix compile error when building am35x
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap:usb: add regulator support for EHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: gadget: Fix out-of-sync runtime pm calls
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: omap2430: Fix retention idle on musb peripheral only boards
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup
  • From: "Avinash.H.M" <avinashhm@xxxxxx>
• [PATCH v2 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH v2 0/2] omap3isp/rx-51: Add vdds_csib regulator handling
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH v2 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH v2 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH v2 0/1] RX-51: add full regulator definitions
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH v2 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: <kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: sakoman-linux-omap-2.6/omap-2.6.38 branch: mmcblk0: retrying using single block read
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [GIT PULL] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: sakoman-linux-omap-2.6/omap-2.6.38 branch: mmcblk0: retrying using single block read
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: problem with "undefined instruction"
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: problem with "undefined instruction"
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: problem with "undefined instruction"
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: problem with "undefined instruction"
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• problem with "undefined instruction"
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• sakoman-linux-omap-2.6/omap-2.6.38 branch: mmcblk0: retrying using single block read
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: N8x0 display support (was: Re: The old omapfb support)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: N8x0 display support (was: Re: The old omapfb support)
  • From: Michael Büsch <m@xxxxxxx>
• Re: N8x0 display support (was: Re: The old omapfb support)
  • From: Michael Büsch <m@xxxxxxx>
• Re: [PATCH 0/8] staging: tidspbridge: PM routines cleanup
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH] Fix incorrect structure freeing in omap_nand_remove()
  • From: green@xxxxxxxxxxxxxx
• [GIT PULL] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [RFC] mtd: nand: Fix bad block identification issue
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 3/3] omap : nand : fix subpage ecc issue with prefetch
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 2/3] omap : nand : fix omap2 module reinsertion
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [RFC] mtd: nand: Fix bad block identification issue
  • From: "Saxena, Parth" <parth.saxena@xxxxxx>
• Re: N8x0 display support (was: Re: The old omapfb support)
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• N8x0 display support (was: Re: The old omapfb support)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• OMAP2+: UART: Remove uart clock handling code from serial.c
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: gadget: Fix out-of-sync runtime pm calls
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 0/1] RX-51: add full regulator definitions
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/1] OMAP3: rx-51: Add full regulator definitions
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH 2/2] AM35xx-Craneboard:Display: Add DVI and TV Support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 06/12] Serial: OMAP2+: Move erratum handling from serial.c
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 09/12] OMAP3: Serial: Remove uart pads from 3430 board file.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 01/12] OMAP2+: UART: Remove certain uart calls from sram_idle
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 00/12] OMAP2+: Serial: Runtime adaptation + cleanup
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH 1/2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 2/2] AM35xx-Craneboard:Display: Add DVI and TV Support
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• [PATCH 1/2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v13 00/11] dmtimer adaptation to platform_driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v13 11/11] OMAP: dmtimer: convert to a driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v13 04/11] OMAP2+: dmtimer: convert to platform devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v13 10/11] OMAP: dmtimer: mark clocksource and clockevent timers reserved
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [GIT PULL] omap fixes for v2.6.39-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH FOR 2.6.39] omap: iommu: Return IRQ_HANDLED in fault handler when no fault occured
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] OMAP3: cpuidle: code rework for improved readability
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/5] OMAP3: cpuidle: change the power domains modes determination logic
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/5] OMAP3: clean-up mach specific cpuidle data structures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 0/5] OMAP: cpuidle code clean-up
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 2/2] Add basic devices support for Nook Color
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 03/12] ARM: omap4: use remapped PPI interrupts for local timer
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/2] OMAP3: RX-51: define vdds_csib regulator supply
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/2] OMAP3: ISP: Add regulator control for omap34xx
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 0/2] omap3isp/rx-51: Add vdds_csib regulator handling
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 1/2] TI816X: Add minimal hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] Initial B&N Nook Color (encore) support.
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Initial B&N Nook Color (encore) support.
  • From: Abimanyu Gottumukkala <me@xxxxxxxxxxx>
• RE: [PATCH 1/2] TI816X: Add minimal hwmod data
  • From: "Grosen, Mark" <mgrosen@xxxxxx>
• Re: [PATCH 1/2] TI816X: Add minimal hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• linux-2.6.38 error: kernel/power/consoleearlysuspend.c:28: error: implicit declaration of function ‘acquire_console_sem’
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH] Staging: Westbridge: replace custom debug macros with pr_...() macros
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Staging: Westbridge: replace custom debug macros with pr_...() macros
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• [PATCH] Staging: Westbridge: replace custom debug macros with pr_...() macros
  • From: Sutharsan <sutharsan.tech@xxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: Initial B&N Nook Color support, take two
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: Initial B&N Nook Color support, take two
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache
  • From: "Gupta, Ramesh" <grgupta@xxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• [RFC PATCH V4 4/4] cpuidle: Single/Global registration of idle states
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V4 1/4] cpuidle: Move dev->last_residency update to driver enter routine, remove dev->last_state
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V4 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V4 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V4 0/4] cpuidle: global registration of idle states with per-cpu statistics
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Add basic devices support for Nook Color
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• [PATCH 1/2] Initial B&N Nook Color (encore) support.
  • From: green@xxxxxxxxxxxxxx
• [PATCH 2/2] Add tps65921 chip
  • From: green@xxxxxxxxxxxxxx
• Initial B&N Nook Color support, take two
  • From: green@xxxxxxxxxxxxxx
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] OMAP: DMA: mstandby mode and runtime pm support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MTD: s3c2410_nand: Add option to disable hw ECC at runtime
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/9] OMAP: GPIO: cleanup, consolidation, etc. (v2)
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxx>
• Re: [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH 2/2] Add basic devices support for Nook Color
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• [ANN] gst-dsp 0.9.0 released
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [linux-pm] [RFC PATCH] PM: Introduce generic DVFS framework with device-specific OPPs
  • From: "Menon, Nishanth" <nm@xxxxxx>
• [PATCH 1/2] TI816X: Add minimal hwmod data
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH 2/2] hwmods: Integrate TI816X hwmods
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH 2/2] Add basic devices support for Nook Color
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [RFC] mtd: nand: Fix bad block identification issue
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH v9 6/9] MFD: TWL4030: workaround changes for TWL4030 Erratum 27
  • From: "Manuel, Lesly Arackal" <leslyam@xxxxxx>
• [PATCH FOR 2.6.39] omap: iommu: Return IRQ_HANDLED in fault handler when no fault occured
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: omap2430: Fix retention idle on musb peripheral only boards
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v9 4/9] OMAP3: PM: TWL4030 power scripts for OMAP3 boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 4/9] OMAP3: PM: TWL4030 power scripts for OMAP3 boards
  • From: "Manuel, Lesly Arackal" <leslyam@xxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC] mtd: nand: Fix bad block identification issue
  • From: "Saxena, Parth" <parth.saxena@xxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Dmitry Artamonow <mad_soft@xxxxxxxx>
• Re: [PATCH 3/4] REGULATOR: TWL6025: add support to twl-regulator
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: TWL6025 allow different regulator name
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] REGULATOR: TWL6025: add support to twl-regulator
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] MFD: TWL6025: add phoenix lite support to twl6030
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] MFD: TWL6025: add phoenix lite support to twl6030
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• [PATCH 2/4] MFD: TWL6030: fix irq definitions
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• [PATCH 3/4] REGULATOR: TWL6025: add support to twl-regulator
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• [PATCH 4/4] USB: TWL6025 allow different regulator name
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• [PATCH 0/4] Add support for twl6025 PMIC
  • From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] omap: musb: introduce default board config
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Initial B&N Nook Color (Encore) support
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Add basic devices support for Nook Color
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: Fix bad SP address after relocating kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 4/4] omap: musb: introduce default baord config
  • From: Oleg Drokin <green@xxxxxxxxxxxxxx>
• [PATCH 2/2] Add basic devices support for Nook Color
  • From: green@xxxxxxxxxxxxxx
• [PATCH 1/2] Initial B&N Nook Color (Encore) support
  • From: green@xxxxxxxxxxxxxx
• Initial B&N Nook Color support
  • From: green@xxxxxxxxxxxxxx
• Re: [PATCH] ARM: Fix bad SP address after relocating kernel
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• [PATCH] arm: omap3: cm-t3517: fix section mismatch warning
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 11/14] PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: gpmc-smsc911x: minor style fixes
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 09/15] OMAP: GPIO: consolidate IRQ status handling, remove #ifdefs
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH] ARM: Fix bad SP address after relocating kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 10/15] OMAP: GPIO: conslidate enable/disable of GPIO IRQs, remove ifdefs
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 11/14] PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  • From: Hans-Christian Egtvedt <hans-christian.egtvedt@xxxxxxxxx>
• Re: [PATCH 11/15] OMAP: GPIO: convert MPUIO IRQ over to generic irq_chip
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 5/7] OMAP: DSS: Adding initialization routine to picodlp panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 3/7] OMAP: DSS: Adding a picodlp panel driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v9 6/9] MFD: TWL4030: workaround changes for TWL4030 Erratum 27
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 5/9] OMAP3: PM: TWL5030 version checking
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/9] OMAP3: PM: Modifying the macro name Main_Ref to all caps
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/9] OMAP3: PM: Correct the warning print during script loading
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/9] OMAP3: PM: Fix for the TWL4030 sleep/wakeup sequence
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH] mfd: Fix usbhs_enable error handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: Fix relocation if image end past uncompressed kernel end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Which git repo for OMAP4430 Pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Which git repo for OMAP4430 Pandaboard
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH] omap v4l2: fix wrong resizer calculation
  • From: Vladimir Pantelic <vladoman@xxxxxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: DSS2: DSI: enable interface for omap4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/4] crypto: omap-sham driver fixes
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• Re: [PATCH 0/4] crypto: omap-sham driver fixes
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [Regression?] Removed regulator support in ehci-omap
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [RFC PATCH 00/18] OMAP: GPIO: cleanup GPIO driver
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states
  • From: Trinabh Gupta <trinabh@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v13 10/11] OMAP: dmtimer: mark clocksource and clockevent timers reserved
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH v13 04/11] OMAP2+: dmtimer: convert to platform devices
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH 0/9] OMAP: GPIO: cleanup, consolidation, etc. (v2)
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH 0/9] OMAP: GPIO: cleanup, consolidation, etc. (v2)
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH 4/4] omap: musb: introduce default baord config
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 2/4] omap: use common initialization for PMIC i2c bus
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 1/4] omap: consolidate touch screen initialization among different boards
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 0/4] omap: cleanup board files
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [Regression?] Removed regulator support in ehci-omap
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [v2 0/7] OMAP: GPIO: Use PM runtime framework
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [linux-pm] [RFC PATCH V3 4/4] cpuidle: Single/Global registration of idle states
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 08/15] OMAP: GPIO: consolidate direction, input, output, remove #ifdefs
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 14/15] OMAP: GPIO: debounce remove SoC specific registers, use pdata
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 12/15] OMAP: GPIO: remove useless gpio_valid() & check_gpio() checks
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 11/15] OMAP: GPIO: convert MPUIO IRQ over to generic irq_chip
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 10/15] OMAP: GPIO: conslidate enable/disable of GPIO IRQs, remove ifdefs
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 07/15] OMAP: GPIO: move register offset defines into gpio.h
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 09/15] OMAP: GPIO: consolidate IRQ status handling, remove #ifdefs
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 04/15] OMAP: GPIO: _get_gpio_irqbank_mask: replace hard-coded mask with bank->width
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 06/15] OMAP: GPIO: remove get_gpio_bank()
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 05/15] OMAP: GPIO: replace get_gpio_index() by using bank width
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 03/15] OMAP: GPIO: move bank width into struct gpio_bank
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 01/15] OMAP: GPIO: _clear_gpio_irqbank: fix flushing of posted write
  • From: Kevin Hilman <khilman@xxxxxx>