Re: [PATCH v5 03/10] OMAP4 : DSS2 : HDMI: Dispc gamma enable set/reset function for TV.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mythri,

Sorry for the late reply, I've only noticed this issue today.

On Thursday 10 March 2011 11:44:11 Mythri P K wrote:
> Adding function to reset/set gamma table bit for TV interface
> currentl only support for disabled is added.
> 
> Signed-off-by: Mythri P K <mythripk@xxxxxx>
> ---
>  drivers/video/omap2/dss/dispc.c |   13 +++++++++++++
>  drivers/video/omap2/dss/dss.h   |    1 +
>  2 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/video/omap2/dss/dispc.c
> b/drivers/video/omap2/dss/dispc.c index b8c576a..9b86f5f 100644
> --- a/drivers/video/omap2/dss/dispc.c
> +++ b/drivers/video/omap2/dss/dispc.c
> @@ -1008,6 +1008,19 @@ void dispc_set_burst_size(enum omap_plane plane,
>  	enable_clocks(0);
>  }
> 
> +void dispc_enable_gamma_table(bool enable)
> +{
> +	/* This is partially implemented to support only
> +	 *  disabling of the gamma table.
> +	 */
> +	if (enable) {
> +		DSSWARN("Gamma table enabling for TV not yet supported");
> +		return;
> +	}
> +
> +	REG_FLD_MOD(DISPC_CONFIG, enable, 9, 9);

Bit 9 in the DISPC_CONFIG register is as FUNCGATED for the OMAP3. From a quick 
glance at the OMAP36xx and OMAP4430 public TRMs, that's the only DISPC_CONFIG 
bit that has been changed between OMAP3 and OMAP4.

> +}
> +
>  static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
>  {
>  	u32 val;
> diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
> index c2c0fcf..9f563a6 100644
> --- a/drivers/video/omap2/dss/dss.h
> +++ b/drivers/video/omap2/dss/dss.h
> @@ -376,6 +376,7 @@ void dispc_set_plane_size(enum omap_plane plane, u16
> width, u16 height); void dispc_set_channel_out(enum omap_plane plane,
>  		enum omap_channel channel_out);
> 
> +void dispc_enable_gamma_table(bool enable);
>  int dispc_setup_plane(enum omap_plane plane,
>  		      u32 paddr, u16 screen_width,
>  		      u16 pos_x, u16 pos_y,

-- 
Regards,

Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux