The CSIb block is used in rx-51 to handle camera ccp2 IO. Adding support to omap3isp driver for managing the power supply for the CSIb IO complex via regulator framework. Also create the apropriate regulator definitions in the rx-51 board file. I propose to push this set through the linux-media, since most of the changes are on the omap3isp driver side. Tested on Nokia N900 and the MeeGo testing daily images (.37 based kernel). Patches on top of Mauro's linux-next tree, build tested and boot tested with that. v2: updated patch 1/2 with comment from Laurent Pinchart v3: removed unnecessary "vaux2" consumer regulator supply Kalle Jokiniemi (2): OMAP3: ISP: Add regulator control for omap34xx OMAP3: RX-51: define vdds_csib regulator supply arch/arm/mach-omap2/board-rx51-peripherals.c | 6 +++++ drivers/media/video/omap3isp/ispccp2.c | 27 ++++++++++++++++++++++++- drivers/media/video/omap3isp/ispccp2.h | 1 + 3 files changed, 32 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
