Hello Steve,
Can you try adding this patch?
Regards,
Keerthy
On Tue, May 3, 2011 at 8:44 PM, Steve Sakoman <sakoman@xxxxxxxxx> wrote:
> On Wed, Mar 2, 2011 at 2:15 AM, Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> wrote:
>> Hi Keerthy,
>>
>> On Tue, Mar 01, 2011 at 07:12:06PM +0530, Keerthy wrote:
>>> MADC(Monitoring ADC) driver enables monitoring analog signals using
>>> analog-to-digital conversion (ADC) on the input source.
>>> The previous discussion concluded in keeping the generic ADC
>>> functionality and the hwmon separate. The discussion can be found here:
>>>
>>> http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg41805.html
>> Thanks a lot, I applied those 2 patches.
>
> I'm attempting to use this drive on the Overo platform with 2.6.39-rc5.
>
> Other than enabling the module with CONFIG_SENSORS_TWL4030_MADC=m are
> there any board file modifications required other than the below?
>
> I have setup the platform data for the twl4030 madc driver:
>
> diff --git a/arch/arm/mach-omap2/board-overo.c
> b/arch/arm/mach-omap2/board-overo.c
> index 112dfc9..05dd3eb 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -637,10 +637,15 @@ static struct twl4030_codec_data overo_codec_data = {
> .audio = &overo_audio_data,
> };
>
> +static struct twl4030_madc_platform_data overo_madc_data = {
> + .irq_line = 1,
> +};
> +
> static struct twl4030_platform_data overo_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
> .gpio = &overo_gpio_data,
> + .madc = &overo_madc_data,
> .usb = &overo_usb_data,
> .codec = &overo_codec_data,
> .vmmc1 = &overo_vmmc1,
>
> However, I am not seeing the sysfs entry created:
>
> # modprobe twl4030-madc-hwmon
> twl4030_madc_hwmon_init entry
>
> # lsmod
> Module Size Used by
> twl4030_madc_hwmon 2594 0
> ipv6 224256 16
> libertas_sdio 14867 0
> libertas 92429 1 libertas_sdio
> cfg80211 144256 1 libertas
> lib80211 5027 1 libertas
> firmware_class 5859 2 libertas_sdio,libertas
>
> # ls /sys/class/hwmon/
> #
>
> I added a couple of printk's to the driver at the entry points of init
> and probe, and as you can see above the init message is printed, but
> not the probe.
>
> Am I missing something really obvious here?
>
> Steve
>
From a05c6cbb4494173e03ea5957666216caedb22d84 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@xxxxxx>
Date: Wed, 4 May 2011 01:14:50 +0530
Subject: [PATCH] Enabling Hwmon driver for twl4030-madc
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
drivers/mfd/twl-core.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 960b5be..e6e99db 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -83,6 +83,13 @@
#define twl_has_madc() false
#endif
+#if defined(CONFIG_SENSORS_TWL4030_MADC) ||\
+ defined(CONFIG_SENSORS_TWL4030_MADC_MODULE)
+#define twl_has_madc_hwmon() true
+#else
+#define twl_has_madc_hwmon() false
+#endif
+
#ifdef CONFIG_TWL4030_POWER
#define twl_has_power() true
#else
@@ -609,6 +616,14 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
return PTR_ERR(child);
}
+if (twl_has_madc_hwmon()) {
+ child = add_child(2, "twl4030_madc_hwmon",
+ NULL, 0,
+ true, pdata->irq_base + MADC_INTR_OFFSET, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
if (twl_has_rtc()) {
/*
* REVISIT platform_data here currently might expose the
--
1.7.0.4
