On Thu, Apr 21, 2011 at 09:50, Igor Grinberg <grinberg@xxxxxxxxxxxxxx> wrote:
> replace "printk(KERN_ERR" by "pr_err("
> and fix needlessly multi-lined #ifdef
>
> Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/gpmc-smsc911x.c | 14 +++++++-------
> arch/arm/plat-omap/include/plat/gpmc-smsc911x.h | 3 +--
> 2 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
> index d30293a..b45efff 100644
> --- a/arch/arm/mach-omap2/gpmc-smsc911x.c
> +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
minor suggestion: wont using pr_fmt help to reduce the need to add %s,
__func__ for pr_err through out the file?
Regards,
Nishanth Menon
> @@ -55,7 +55,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
> gpmc_cfg = board_data;
>
> if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
> - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
> + pr_err("%s: Failed to request GPMC mem region\n", __func__);
> return;
> }
>
> @@ -63,8 +63,8 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
> gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
>
> if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) {
> - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
> - gpmc_cfg->gpio_irq);
> + pr_err("%s: Failed to request IRQ GPIO%d\n", __func__,
> + gpmc_cfg->gpio_irq);
> goto free1;
> }
>
> @@ -74,8 +74,8 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
> if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
> ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset");
> if (ret) {
> - printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n",
> - gpmc_cfg->gpio_reset);
> + pr_err("%s: Failed to request reset GPIO%d\n", __func__,
> + gpmc_cfg->gpio_reset);
> goto free2;
> }
>
> @@ -92,7 +92,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
> gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
> &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
> if (!pdev) {
> - printk(KERN_ERR "Unable to register smsc911x device\n");
> + pr_err("%s: Unable to register platform device\n", __func__);
> gpio_free(gpmc_cfg->gpio_reset);
> goto free2;
> }
> @@ -104,5 +104,5 @@ free2:
> free1:
> gpmc_cs_free(gpmc_cfg->cs);
>
> - printk(KERN_ERR "Could not initialize smsc911x\n");
> + pr_err("Could not initialize smsc911x\n");
> }
> diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
> index d3f1579..ea6c9c8 100644
> --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
> +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
> @@ -21,8 +21,7 @@ struct omap_smsc911x_platform_data {
> u32 flags;
> };
>
> -#if defined(CONFIG_SMSC911X) || \
> - defined(CONFIG_SMSC911X_MODULE)
> +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
>
> extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
>
> --
> 1.7.3.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
