Re: [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 5, 2011 at 5:29 AM, Kevin Hilman <khilman@xxxxxx> wrote:
> "Govindraj.R" <govindraj.raja@xxxxxx> writes:
>
>> Add api to enable io_pad wakeup based on mux dynamic pad and
>
> s/api/API/
> s/io_pad/IO pad/

will update.

>
>> wake_up enable flag initialized during hwmod_mux.
>>
>> Use the wakeup flag and pad_remux flag and enable wakeup capability
>> for the pad having these flags enabled.
>>
>> Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx>
>
> This patch (except for the serial.c hange) isn't really dependent on the
> rest of this series, and should be a separate patch to be merged by
> Paul.
>

Yes. fine will post out hwmod API additions as separate patch.

> Some other comments below...
>
>> ---
>>  arch/arm/mach-omap2/omap_hwmod.c              |   34 +++++++++++++++++++++++++
>>  arch/arm/mach-omap2/serial.c                  |    6 ++++
>>  arch/arm/plat-omap/include/plat/omap_device.h |    1 +
>>  arch/arm/plat-omap/include/plat/omap_hwmod.h  |    1 +
>>  arch/arm/plat-omap/omap_device.c              |   26 +++++++++++++++++++
>>  5 files changed, 68 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
>> index e034294..4a12336 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>> @@ -2369,3 +2369,37 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
>>
>>       return 0;
>>  }
>> +
>> +/**
>> + * omap_hwmod_enable_ioring_wakeup - Set wakeup bit for iopad ring.
>> + * @oh: struct omap_hwmod *
>> + * @enable: based on 0 or 1 set or unset wakeup bit.
>
> more specifically, when true, set wakeup bit, when false, clear wakeup bit

ok.

>
>> + * traverse through dynamic pads. If pad is enabled then
>> + * set wakeup bit for the mux pin. Return error if pads are
>> + * not enabled or not available.
>> + */
>
> The comment here should be clearer about when the bit actually gets
> set.  Specifically, this function doesn't actually write the value out,
> but instead it configures the value which will be used during the hwmod
> idle transition.
>

Yes correct. Will update the comments.

> Kevin
> --
> To unsubscribe from this list: send the line "unsubscribe linux-serial" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux