Hi Kalle,
Thanks for the patch.
On Monday 02 May 2011 11:16:16 Kalle Jokiniemi wrote:
> The current omap3isp driver is missing regulator handling
> for CSIb complex in omap34xx based devices. This patch
> adds a mechanism for this to the omap3isp driver.
>
> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/video/omap3isp/ispccp2.c | 27 +++++++++++++++++++++++++--
> drivers/media/video/omap3isp/ispccp2.h | 1 +
> 2 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/video/omap3isp/ispccp2.c
> b/drivers/media/video/omap3isp/ispccp2.c index 0e16cab..ec9e395 100644
> --- a/drivers/media/video/omap3isp/ispccp2.c
> +++ b/drivers/media/video/omap3isp/ispccp2.c
> @@ -30,6 +30,7 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/uaccess.h>
> +#include <linux/regulator/consumer.h>
>
> #include "isp.h"
> #include "ispreg.h"
> @@ -163,6 +164,9 @@ static void ccp2_if_enable(struct isp_ccp2_device
> *ccp2, u8 enable) struct isp_pipeline *pipe =
> to_isp_pipeline(&ccp2->subdev.entity); int i;
>
> + if (enable && ccp2->vdds_csib)
> + regulator_enable(ccp2->vdds_csib);
> +
> /* Enable/Disable all the LCx channels */
> for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
> isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
> @@ -186,6 +190,9 @@ static void ccp2_if_enable(struct isp_ccp2_device
> *ccp2, u8 enable) ISPCCP2_LC01_IRQENABLE,
> ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
> }
> +
> + if (!enable && ccp2->vdds_csib)
> + regulator_disable(ccp2->vdds_csib);
> }
>
> /*
> @@ -1137,6 +1144,9 @@ error:
> */
> void omap3isp_ccp2_cleanup(struct isp_device *isp)
> {
> + struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
> +
> + regulator_put(ccp2->vdds_csib);
> }
>
> /*
> @@ -1151,14 +1161,27 @@ int omap3isp_ccp2_init(struct isp_device *isp)
>
> init_waitqueue_head(&ccp2->wait);
>
> - /* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
> + /*
> + * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
> + * complex, which is powered by vdds_csib power rail. Hence the
> + * request for the regulator.
> + *
> + * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
> * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
> * configured.
> *
> * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
> */
> - if (isp->revision == ISP_REVISION_15_0)
> + if (isp->revision == ISP_REVISION_2_0) {
> + ccp2->vdds_csib = regulator_get(isp->dev, "vdds_csib");
> + if (IS_ERR(ccp2->vdds_csib)) {
> + dev_dbg(isp->dev,
> + "Could not get regulator vdds_csib\n");
> + ccp2->vdds_csib = NULL;
> + }
> + } else if (isp->revision == ISP_REVISION_15_0) {
> ccp2->phy = &isp->isp_csiphy1;
> + }
>
> ret = ccp2_init_entities(ccp2);
> if (ret < 0)
> diff --git a/drivers/media/video/omap3isp/ispccp2.h
> b/drivers/media/video/omap3isp/ispccp2.h index 5505a86..6674e9d 100644
> --- a/drivers/media/video/omap3isp/ispccp2.h
> +++ b/drivers/media/video/omap3isp/ispccp2.h
> @@ -81,6 +81,7 @@ struct isp_ccp2_device {
> struct isp_interface_mem_config mem_cfg;
> struct isp_video video_in;
> struct isp_csiphy *phy;
> + struct regulator *vdds_csib;
> unsigned int error;
> enum isp_pipeline_stream_state state;
> wait_queue_head_t wait;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
