Linux IIO Development

• Thread Index

• Re: [PATCH 7/8] counter/ti-eqep: add support for edge capture unit
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 5/8] counter/ti-eqep: add support for latched position
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• RE: [PATCH 1/2] iio: frequency: admv1013: add support for ADMV1013
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 4/8] docs: counter: add unit timer sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: dt-bindings: treewide: Update @st.com email address to @foss.st.com
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: dt-bindings: treewide: Update @st.com email address to @foss.st.com
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH V2 3/3] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V2 3/3] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 2/3] iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V2 0/3] thermal: qcom: Add support for PMIC5 Gen2 ADC_TM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: frequency: add admv1013 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/2] iio: frequency: admv1013: add support for ADMV1013
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 0/2]
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• RE: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• Re: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio/mlx90632: restyle mlx90632
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH] iio: light: ltr501: Added ltr303 driver support
  • From: Maslov Dmitry <maslovdmitry@xxxxxxxx>
• [PATCH] iio: accel: mma7660: Warn about failure to put device in stand-by in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH v2] iio: adc: lpc18xx_adc: Reorder clk_get_rate function call
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• Re: [PATCH] iio: adc: lpc18xx_adc: Reorder clk_get_rate function call
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• Re: [PATCH 2/2] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• RE: [PATCH 2/2] iio: trigger: Fix reference counting
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/8] counter/ti-eqep: add support for unit timer
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix a leak by resetting pcsel before disabling vdda
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 2/8] counter/ti-eqep: add support for direction
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/8] counter/ti-eqep: implement over/underflow events
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/3] iio: kxsd9: Don't return error code in trigger handler
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adc: lpc18xx_adc: Reorder clk_get_rate function call
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH] iio: adc: lpc18xx_adc: Reorder clk_get_rate function call
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• [PATCH 3/3] iio: stk3310: Don't return error code in interrupt handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/3] iio: kxsd9: Don't return error code in trigger handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/3] iio: ltr501: Don't return error code in trigger handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v7 1/2] iio: core: Introduce IIO_VAL_INT_64.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/2] iio: core: Introduce IIO_VAL_INT_64.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix a leak by resetting pcsel before disabling vdda
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: frequency: adrf6780: Fix adrf6780_spi_{read,write}()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 2nd set of IIO new device support, features, cleanup for 5.16
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for the 5.16 cycle (suggest queuing for merge window as nothing urgent)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for the 5.16 cycle (suggest queuing for merge window as nothing urgent)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: trigger: Fix reference counting
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/2] iio: mma8452: Fix trigger reference couting
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v7 2/2] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v7 1/2] iio: core: Introduce IIO_VAL_INT_64.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v7 0/2] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: frequency: adrf6780: Fix adrf6780_spi_{read,write}()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: frequency: adrf6780: Fix adrf6780_spi_{read,write}()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for the 5.16 cycle (suggest queuing for merge window as nothing urgent)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for the 5.16 cycle (suggest queuing for merge window as nothing urgent)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PULL] 2nd set of IIO new device support, features, cleanup for 5.16
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH v9 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix a leak by resetting pcsel before disabling vdda
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• [PATCH] iio: adc: stm32: fix a leak by resetting pcsel before disabling vdda
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v4 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v4 0/2] drivers:iio:dac: Add AD3552R driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v2] iio/mlx90632: restyle mlx90632
  • From: Yanteng Si <siyanteng01@xxxxxxxxx>
• Re: [PATCH v9 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: scd4x: Add a scale for the co2 concentration reading
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: chemical: scd4x: Add a scale for the co2 concentration reading
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• Re: [PATCH] iio/mlx90632: restyle mlx90632_calc_temp_object_iteration
  • From: teng sterling <sterlingteng@xxxxxxxxx>
• [PATCH] iio: xilinx-xadc: Make IRQ optional
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ina2xx: Avoid double reference counting from get_task_struct/put_task_struct()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v2 1/2] iio: adc: ina2xx: Make use of the helper macro kthread_run()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, IIO, Input (Touchscreen) and Clk due for the v5.16 merge window
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] iio/mlx90632: restyle mlx90632_calc_temp_object_iteration
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, IIO, Input (Touchscreen) and Clk due for the v5.16 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-adc: Fix of_node_put() issue in stm32-adc
  • From: Wan Jiabing <wanjiabing@xxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, IIO, Input (Touchscreen) and Clk due for the v5.16 merge window
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] iio/mlx90632: restyle mlx90632_calc_temp_object_iteration
  • From: Yanteng Si <siyanteng01@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Fix of_node_put() issue in stm32-adc
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, IIO, Input (Touchscreen) and Clk due for the v5.16 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v9 2/2] dt-bindings: iio: frequency: add adrf6780 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: Fix of_node_put() issue in stm32-adc
  • From: Wan Jiabing <wanjiabing@xxxxxxxx>
• Re: [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] counter: Fix use-after-free race condition for events_queue_size write
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] counter: Cleanup lingering atomic.h includes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: Make use of the helper macro kthread_run()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: adc: ina2xx: Make use of the helper macro kthread_run()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• RE: [PATCH v8 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v6 00/48] TI AM437X ADC1
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• [PATCH v3 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v3 0/2] drivers:iio:dac: Add AD3552R driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• [PATCH AUTOSEL 5.14 04/26] iio/test-format: build kunit tests without structleak plugin
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] mux: fix kernel doc prototype
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: adc: ad7280a: fixed coding style
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] mux: fix kernel doc prototype
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/3] dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc128s052: Simplify 'adc128_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/48] TI AM437X ADC1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 00/48] TI AM437X ADC1
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] iio: ms5611: Simplify IO callback parameters
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: dt-bindings: treewide: Update @st.com email address to @foss.st.com
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: imx7d_adc: Don't pass IIO device to imx7d_adc_{enable,disable}()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: st-sensors: Use dev_to_iio_dev() in sysfs callbacks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: light: ltr501: Added ltr303 driver support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: dt-bindings: treewide: Update @st.com email address to @foss.st.com
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] iio: light: ltr501: Added ltr303 driver support
  • From: Maslov Dmitry <maslovdmitry@xxxxxxxx>
• dt-bindings: treewide: Update @st.com email address to @foss.st.com
  • From: <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH] Staging: iio: adc: ad7280a: fixed coding style
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Staging: iio: adc: ad7280a: fixed coding style
  • From: sesankm <sesank.mallikarjuna@xxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• RE: BMI160 accelerometer on AyaNeo tablet
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH] iio: dln2-adc: Fix lockdep complaint
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 5/3] dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/3] dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
• [PATCH v7 4/4] MAINTAINERS: Add maintainer for xilinx-ams
  • From: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
• [PATCH v7 1/4] arm64: zynqmp: DT: Add Xilinx AMS node
  • From: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
• [PATCH v7 3/4] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  • From: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
• [PATCH v7 2/4] iio: adc: Add Xilinx AMS driver
  • From: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
• [PATCH v7 0/4] Add Xilinx AMS Driver
  • From: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [Bug 214751] Lenovo Yoga Chromebook C630 i7 missing support for sound, microphone, touchscreen and gyroscope
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v2 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: max9611: Use of_device_get_match_data to simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] iio: adc: rockchip_saradc: Use of_device_get_match_data to simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: twl6030-gpadc: Use of_device_get_match_data to simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] iio: Use of_device_get_match_data to clean code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PULL V3] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL V4] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL V3] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: at91-sama5d2: Use dev_to_iio_dev() in sysfs callbacks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/2] iio: at91-sama5d2: Fix incorrect cast to platform_device
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v6 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PULL V3] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL V4] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] mux: fix kernel doc prototype
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL V3] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL V2] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] mux: fix kernel doc prototype
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PULL V2] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL V3] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
• Re: [PULL V2] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PULL] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] iio: dln2-adc: Fix lockdep complaint
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v8 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 2/2] dt-bindings: iio: frequency: add adrf6780 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [Bug 214751] New: Lenovo Yoga Chromebook C630 i7 missing support for sound, microphone, touchscreen and gyroscope
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter/counter-sysfs: use sysfs_emit everywhere
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• Re: [PATCH] counter/counter-sysfs: use sysfs_emit everywhere
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v5 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2] iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] counter: drop chrdev_lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter/counter-sysfs: use sysfs_emit everywhere
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter/counter-sysfs: use sysfs_emit everywhere
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] counter/counter-sysfs: use sysfs_emit everywhere
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] counter: drop chrdev_lock
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH] iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: tsc2046: fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() call
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: tsc2046: fix scan interval warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/7] iio: adc: stm32-adc: add internal channels support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: trigger: fix iio_trigger reference leak
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: check return value when calling dev_set_name()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v17 2/9] counter: Add character device interface
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: xilinx-xadc: Remove `irq` field from state struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v17 2/9] counter: Add character device interface
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix memory leak in iio_buffer_register_legacy_sysfs_groups()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: buffer: allocation and freeing buffers fix and optimization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v17 2/9] counter: Add character device interface
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v17 5/9] counter: Implement signalZ_action_component_id sysfs attribute
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v17 2/9] counter: Add character device interface
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: buffer: check return value of kstrdup_const()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: buffer: Check the return value of kstrdup_const()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: lpc18xx_adc: Convert probe to device managed version
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: xilinx-xadc: Remove `irq` field from state struct
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: light: cm3605: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/9] iio: adc: ab8500-gpadc: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: Fix uninitialized variable ret
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: lpc18xx_adc: Convert probe to device managed version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] counter/ti-eqep: add support for edge capture unit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] docs: counter: add unit timer sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/8] counter/ti-eqep: add support for unit timer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] counter/ti-eqep: add support for direction
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] counter/ti-eqep: implement over/underflow events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 RESEND] iio: dac: ad5446: Fix ad5622_write() return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: ad5446: Fix ad5622_write() return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL V2] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of counter subsystem new features for the 5.16 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 1st set of counter and IIO new features, drivers etc for 5.16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 1st set of counter and IIO new features, drivers etc for 5.16
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 1st set of counter and IIO new features, drivers etc for 5.16
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/8] counter/ti-eqep: implement over/underflow events
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 0/8] counter: ti-eqep: implement features for speed measurement
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 8/8] docs: counter: add edge_capture_unit_* attributes
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 5/8] counter/ti-eqep: add support for latched position
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 7/8] counter/ti-eqep: add support for edge capture unit
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 2/8] counter/ti-eqep: add support for direction
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 3/8] counter/ti-eqep: add support for unit timer
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 4/8] docs: counter: add unit timer sysfs attributes
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of counter and IIO new features, drivers etc for 5.16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: adc: lpc18xx_adc: Convert probe to device managed version
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• Re: [PATCH 0/9] treewide: simplify getting .driver_data
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH][next] iio: Fix uninitialized variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v6 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V2 1/5] hid-lenovo: replace snprintf in show functions with sysfs_emit
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V2 4/5] hid-sensor: replace snprintf in show functions with sysfs_emit
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH V2 5/5] hid-sony: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH V2 4/5] hid-sensor: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH V2 3/5] hid-roccat: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH V2 2/5] hid-picolcd: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH V2 1/5] hid-lenovo: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH V2 0/5] hid: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• 回复: [PATCH] hid: replace snprintf in show functions with sysfs_emit
  • From: 王擎 <wangqing@xxxxxxxx>
• Re: [PATCH] hid: replace snprintf in show functions with sysfs_emit
  • From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
• [PATCH v6 47/48] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 48/48] ARM: dts: am437x-gp-evm: enable ADC1
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 46/48] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 44/48] iio: adc: ti_am335x_adc: Add the scale information
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 45/48] iio: adc: ti_am335x_adc: Add the am437x compatible
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 43/48] iio: adc: ti_am335x_adc: Add a unit to the timeout delay
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 42/48] iio: adc: ti_am335x_adc: Gather the checks on the delays
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 41/48] iio: adc: ti_am335x_adc: Get rid of useless gotos
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 40/48] iio: adc: ti_am335x_adc: Fix style
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 24/48] mfd: ti_am335x_tscadc: Fix header spacing
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 39/48] iio: adc: ti_am335x_adc: Replace license text with SPDX tag
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 38/48] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 37/48] mfd: ti_am335x_tscadc: Support the correctly spelled DT property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 35/48] mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 34/48] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 33/48] mfd: ti_am335x_tscadc: Fix an error message
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 32/48] mfd: ti_am335x_tscadc: Rename a variable
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 30/48] mfd: ti_am335x_tscadc: Rename the subsystem enable macro
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 29/48] mfd: ti_am335x_tscadc: Drop useless definitions from the header
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 28/48] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 27/48] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 26/48] mfd: ti_am335x_tscadc: Drop unused definitions from the header
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 23/48] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 22/48] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 21/48] mfd: ti_am335x_tscadc: Reorder the initialization steps
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 20/48] mfd: ti_am335x_tscadc: Always provide an idle configuration
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 19/48] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 18/48] mfd: ti_am335x_tscadc: Mimic the probe from resume()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 17/48] mfd: ti_am335x_tscadc: Use driver data
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 16/48] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 15/48] mfd: ti_am335x_tscadc: Simplify divisor calculation
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 14/48] mfd: ti_am335x_tscadc: Don't search the tree for our clock
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 13/48] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 12/48] mfd: ti_am335x_tscadc: Get rid of useless gotos
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 08/48] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 10/48] mfd: ti_am335x_tscadc: Fix style
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 09/48] mfd: ti_am335x_tscadc: Replace license text with SPDX tag
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 11/48] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 07/48] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 06/48] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 05/48] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 04/48] dt-bindings: iio: adc: ti,am3359-adc: New yaml description
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 02/48] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 01/48] clk: ti: am43xx: Add clkctrl data for am43xx ADC1
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 00/48] TI AM437X ADC1
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] hid: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: light: Document ltr501 light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: imx8qxp-adc: mark PM functions as __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 RESEND] iio: dac: ad5446: Fix ad5622_write() return value
  • From: Pekka Korpinen <pekka.korpinen@xxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/15] iio: let spi drivers return 0 in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/15] iio: imu: st_lsm9ds0: Make st_lsm9ds0_remove() return void
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/15] iio: accel: ad5064: Make ad5064_core_remove() return void
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH v5 6/7] iio: adc: stm32-adc: add vrefint calibration support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 5/7] iio: adc: stm32-adc: add support of internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 7/7] iio: adc: stm32-adc: use generic binding for sample-time
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 4/7] iio: adc: stm32-adc: add support of generic channels binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 3/7] iio: adc: stm32-adc: split channel init into several routines
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 0/7] iio: adc: stm32-adc: add internal channels support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 2/7] dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 00/15] iio: let spi drivers return 0 in .remove()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] counter: replace snprintf in show functions with sysfs_emit
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] iio: imx8qxp-adc: mark PM functions as __maybe_unused
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] iio: imx8qxp-adc: mark PM functions as __maybe_unused
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH 13/15] iio: magn: hmc5843: Make hmc5843_common_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 08/15] iio: dac: ad5446: Make ad5446_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/15] iio: imu: st_lsm9ds0: Make st_lsm9ds0_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 07/15] iio: dac: ad5380: Make ad5380_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/15] iio: dac: ad5592r: Make ad5592r_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 14/15] iio: potentiometer: max5487: Don't return an error in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 00/15] iio: let spi drivers return 0 in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 06/15] iio: accel: ad5064: Make ad5064_core_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 05/15] iio: accel: mma7455: Make mma7455_core_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 01/15] iio: accel: bma400: Make bma400_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 11/15] iio: health: afe4403: Don't return an error in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 15/15] iio: pressure: ms5611: Make ms5611_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 10/15] iio: dac: ad5686: Make ad5686_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 04/15] iio: accel: kxsd9: Make kxsd9_common_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 03/15] iio: accel: bmi088: Make bmi088_accel_core_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 02/15] iio: accel: bmc150: Make bmc150_accel_core_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc128s052: Simplify 'adc128_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imx8qxp-adc: mark PM functions as __maybe_unused
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH] iio: buffer: Fix memory leak in iio_buffer_register_legacy_sysfs_groups()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH] iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 1/2] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: buffer: Use dedicated variable in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: buffer: allocation and freeing buffers fix and optimization
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] iio: imx8qxp-adc: Fix the error - defined but not used for runtime pm API
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] iio: buffer: check return value of kstrdup_const()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH] counter: replace snprintf in show functions with sysfs_emit
  • From: Qing Wang <wangqing@xxxxxxxx>
• [PATCH v3] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH] iio: imx8qxp-adc: Fix the error - defined but not used for runtime pm API
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• Re: [PATCH v3 1/4] iio: light: cm3605: Make use of the helper function dev_err_probe()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: linux-next: Tree for Oct 12 (drivers/iio/adc/imx8qxp-adc.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 7/7] iio: adc: stm32-adc: use generic binding for sample-time
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 6/7] iio: adc: stm32-adc: add vrefint calibration support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 5/7] iio: adc: stm32-adc: add support of internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 4/7] iio: adc: stm32-adc: add support of generic channels binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 2/7] dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 3/7] iio: adc: stm32-adc: split channel init into several routines
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 0/7] iio: adc: stm32-adc: add internal channels support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v5] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v4 5/7] iio: adc: stm32-adc: add support of internal channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH] iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 6/9] iio: common: cros_ec_sensors: simplify getting .driver_data
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 6/9] iio: common: cros_ec_sensors: simplify getting .driver_data
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: core: check return value when calling dev_set_name()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH v4 3/7] iio: adc: stm32-adc: split channel init into several routines
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 5/7] iio: adc: stm32-adc: add support of internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 4/7] iio: adc: stm32-adc: add support of generic channels binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 0/7] iio: adc: stm32-adc: add internal channels support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 2/7] dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: core: do not create debugfs when has no dev name
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: core: do not create debugfs when has no dev name
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next] iio: buffer: Check the return value of kstrdup_const()
  • From: Wang Wensheng <wangwensheng4@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Teng Qi <starmiku1207184332@xxxxxxxxx>
• [PATCH v7 2/2] dt-bindings: iio: frequency: add adrf6780 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v7 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH] drm/bridge: parade-ps8640: check return values in ps8640_aux_transfer()
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• Re: [PATCH] iio: adc: lpc18xx_adc: Convert probe to device managed version
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/6] drivers:iio:dac:ad5766.c: Add trigger buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/6] iio: triggered-buffer: extend support to configure output buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/9] iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Fix an array overflow in st_lsm6dsx_set_odr()
  • From: Teng Qi <starmiku1207184332@xxxxxxxxx>
• Re: [PATCH 2/2] drivers:iio:light: add ADPD188 driver support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: core: fix double free in iio_device_unregister_sysfs()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 5/3] dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 4/3] dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: add adpd188 schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: lpc18xx_adc: Convert probe to device managed version
  • From: André Gustavo Nakagomi Lopez <andregnl@xxxxxx>
• [PATCH v5 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v5 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drivers:iio:light: add ADPD188 driver support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: add adpd188 schema
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v4 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v4 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 2/2] drivers:iio:dac: Add AD3552R driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v2 0/2] Add ad3552r and ad3542r driver support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• Re: [PATCH v3 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH 2/2] drivers:iio:light: add ADPD188 driver support
  • From: <andrei.drimbarean@xxxxxxxxxx>
• [PATCH 0/2] ADPD188 linux driver
  • From: <andrei.drimbarean@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: add adpd188 schema
  • From: <andrei.drimbarean@xxxxxxxxxx>
• [PATCH v5 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v5 2/4] MAINTAINERS: Add myself as maintainer of the scd4x driver
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: iio: chemical: sensirion,scd4x: Add yaml description
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v5 4/4] iio: documentation: Document scd4x calibration use
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v4 9/9] iio: adc: ti-ads7950: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 8/9] iio: adc: rockchip_saradc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 7/9] iio: adc: qcom-pm8xxx-xoadc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 6/9] iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 5/9] iio: adc: max1241: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 4/9] iio: adc: max1118: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 3/9] iio: adc: lpc18xx_adc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 2/9] iio: adc: imx7d_adc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v4 1/9] iio: adc: ab8500-gpadc: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v3 4/4] iio: light: noa1305: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v3 3/4] iio: light: gp2ap002: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v3 2/4] iio: light: cm36651: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• [PATCH v3 1/4] iio: light: cm3605: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• Re: [PATCH] iio/scmi: check if dev is null pointer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: trigger: fix iio_trigger reference leak
  • From: gavinli@xxxxxxxxxxxxxx
• Re: [PATCH] io: imu: st_lsm6dsx: check if dev is null pointer
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: Add output buffer support
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH] iio/scmi: check if dev is null pointer
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• [PATCH] io: imu: st_lsm6dsx: check if dev is null pointer
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: light: noa1305: Make use of the helper function dev_err_probe()
  • From: Cai Huoqing <caihuoqing@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: light: noa1305: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: light: cm36651: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: st_lsm9ds0: Make use of the helper function dev_err_probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: health: afe4403: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: st_lsm9ds0: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: st_sensors: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: dac: ti-dac7311: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/8] iio: dac: ad8801: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v6 1/6] iio: Add output buffer support
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• RE: [PATCH v6 1/6] iio: Add output buffer support
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 5/6] Documentation:devicetree:bindings:iio:dac: Fix val
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/6] drivers: iio: dac: ad5766: Fix dt property name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] docs: counter: Include counter-chrdev kernel-doc to generic-counter.rst
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] counter: fix docum. build problems after filename change
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: adc: ad799x: Implement selecting external reference voltage input on AD7991, AD7995 and AD7999.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure_spi: Add missing entries SPI to device ID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] iio: multiplexer: iio-mux: Support settle-time-us property
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: io-channel-mux: Add property for settle time
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 1/3] mux: add support for delay after muxing
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 0/3] Add settle time support to iio-mux
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 0/2] iio: adc: tsc2046: fixes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: tsc2046: fix scan interval warning
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: tsc2046: fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() call
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• RE: [PATCH v6 0/6] iio: Add output buffer support
  • From: "Chindris, Mihail" <Mihail.Chindris@xxxxxxxxxx>
• [PATCH v6 6/6] drivers:iio:dac:ad5766.c: Add trigger buffer
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 5/6] Documentation:devicetree:bindings:iio:dac: Fix val
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 4/6] drivers: iio: dac: ad5766: Fix dt property name
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 3/6] iio: triggered-buffer: extend support to configure output buffers
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 2/6] iio: kfifo-buffer: Add output buffer support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 1/6] iio: Add output buffer support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• [PATCH v6 0/6] iio: Add output buffer support
  • From: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
• RE: [PATCH] iio: st_pressure_spi: Add missing entries SPI to device ID table
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• [PATCH 1/4] dt-bindings: vendor-prefixes: Document liteon vendor prefix
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 3/4] iio: light: ltr501: Add rudimentary regulator support
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 4/4] iio: light: ltr501: Add of_device_id table
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 2/4] dt-bindings: iio: light: Document ltr501 light sensor bindings
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v3 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v3 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Vasyl Vavrychuk <vasyl.vavrychuk@xxxxxxxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for the 5.15 cycles
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Fix the uninitialized use if regmap_read() fails
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• [PATCH] docs: counter: Include counter-chrdev kernel-doc to generic-counter.rst
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH -next] counter: fix docum. build problems after filename change
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH -next] counter: fix docum. build problems after filename change
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: fix error code in max1027_wait_eoc()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for the 5.15 cycles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: iio: stm32-adc: add generic channel binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/2] dt-bindings: iio: ad779x: Add binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: fix error code in max1027_wait_eoc()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] iio: adc: max1027: fix error code in max1027_wait_eoc()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [bug report] iio: adc: max1027: Use the EOC IRQ when populated for single reads
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [bug report] iio: adc: max1027: Use the EOC IRQ when populated for single reads
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: Move include/linux/iio-opaque.h to drivers/iio/iio_opaque.h
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND v2 1/5] iio: accel: mma9551/mma9553: Drop explicit ACPI match support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Update header includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 5/5] iio: accel: mma9553: Use devm managed functions to tidy up probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 4/5] iio: accel: mma9551: Use devm managed functions to tidy up probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 3/5] iio: accel: mma9551: Add support to get irqs directly from fwnode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 2/5] iio: accel: mma9551/mma9553: Simplify pm logic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 1/5] iio: accel: mma9551/mma9553: Drop explicit ACPI match support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND v2 0/5] iio: accel: mma9551/mma9553 Cleanup and update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] IIO: Alignment fixes part 4 - bounce buffers for the hard cases.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Fix the uninitialized use if regmap_read() fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: opt3001: Fixed timeout error when 0 lux
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: chemical: SENSEAIR_SUNRISE_CO2 depends on I2C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 11/11] iio: kfifo-buf.c: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 10/11] iio: industrialio-buffer-cb: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 09/11] iio: industrialio-triggered-buffer: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 08/11] iio: misc core files: Bring includes up to date
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 07/11] iio: configfs: Bring includes up to date
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 05/11] iio: industrialio-trigger.c: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 06/11] iio: inkern: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 03/11] iio: industrialio-buffer.c: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 04/11] iio: industrialio-event.c: Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 02/11] iio: industrialio-core - Bring includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 01/11] iio: industrialio-core: Reorder header includes to be alphabetical.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 00/11] IIO: Bring core header includes up to date.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/7] iio: accel: cros_ec_accel_legacy: Drop unused IIO includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: Move include/linux/iio-opaque.h to drivers/iio/iio_opaque.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/7] iio: prox: cros_ec_mkbp: Drop unused IIO headers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/7] iio: pressure: cros_ec_baro: Drop unused IIO headers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/7] iio: light: cros_ec_light_prox: Drop unused IIO includes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/7] iio: cros_ec_lid_angle: Drop unused IIO includes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/7] iio: accel: cros_ec_accel_legacy: Drop unused IIO includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/7] iio: cros_ec_sensors: Remove excessive IIO includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/7] cros_ec_sensors: Drop unused IIO header includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/7] platform/chrome: cros_ec_sensorhub_ring - avoid including iio.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH -next] iio: chemical: SENSEAIR_SUNRISE_CO2 depends on I2C
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: adc: aspeed: Fix spelling mistake "battey" -> "battery"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: nau7802: convert probe to full device-managed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/9] iio: adc: meson_saradc: Make use of the helper function dev_err_probe()
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure_spi: Add missing entries SPI to device ID table
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH][next] iio: adc: aspeed: Fix spelling mistake "battey" -> "battery"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v4 36/48] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: dac: ltc1660: Make use of the helper function dev_err_probe()
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 25/48] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• [PATCH v4 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v4 4/4] iio: documentation: Document scd4x calibration use
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v4 2/4] MAINTAINERS: Add myself as maintainer of the scd4x driver
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v4 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: iio: chemical: sensirion,scd4x: Add yaml description
  • From: Roan van Dijk <roan@xxxxxxxxxxx>
• Re: [PATCH 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Andriy Tryshnivskyy <andriy.tryshnivskyy@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: nau7802: convert probe to full device-managed
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• RE: [PATCH] iio: st_pressure_spi: Add missing entries SPI to device ID table
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v17 0/9] Introduce the Counter character device interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] dt-bindings: iio: ad779x: Add binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure_spi: Add missing entries SPI to device ID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Kconfig: add COMPILE_TEST dep for berlin2-adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rn5t618-adc: use devm_iio_map_array_register() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: convert probe to full device-managed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: nau7802: convert probe to full device-managed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: Understanding the modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio/scmi: Add reading "raw" attribute.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v6 2/2] dt-bindings: iio: ad779x: Add binding document
  • From: Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx>
• [PATCH v6 1/2] iio: adc: ad799x: Implement selecting external reference voltage input on AD7991, AD7995 and AD7999.
  • From: Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx>
• [PATCH v4] workaround regression in ina2xx introduced by cb47755725da("time: Prevent undefined behaviour in timespec64_to_ns()")
  • From: Iain Hunter <drhunter95@xxxxxxxxx>
• Re: [PATCH v2 1/5] gcc-plugins/structleak: add makefile var for disabling structleak
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: ad779x: Add binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 5/5] bitfield: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2 4/5] thunderbolt: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2 3/5] device property: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2 2/5] iio/test-format: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2 1/5] gcc-plugins/structleak: add makefile var for disabling structleak
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2 0/5] kunit: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v1 6/6] bitfield: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v1 5/6] mmc: sdhci-of-aspeed: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v1 2/6] iio/test-format: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v1 0/6] kunit: build kunit tests without structleak plugin
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v1 1/6] gcc-plugins/structleak: add makefile var for disabling structleak
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2] iio: dac: ad5446: Fix ad5622_write() return value
  • From: Pekka Korpinen <pekka.korpinen@xxxxxx>
• Re: [PATCH v2 2/2] iio: st_lsm9ds0: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/9] iio: adc: rockchip_saradc: Make use of the helper function dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>