From: Liam Beguin <lvb@xxxxxxxxxx>
Some ADCs use IIO_VAL_INT_PLUS_{NANO,MICRO} scale types.
Add support for these to allow using the iio-rescaler with them.
Signed-off-by: Liam Beguin <lvb@xxxxxxxxxx>
Reviewed-by: Peter Rosin <peda@xxxxxxxxxx>
---
drivers/iio/afe/iio-rescale.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index d0669fd8eac5..190a83e08008 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -17,11 +17,15 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/units.h>
int rescale_process_scale(struct rescale *rescale, int scale_type,
int *val, int *val2)
{
unsigned long long tmp;
+ s32 rem;
+ u32 mult;
+ u32 neg;
switch (scale_type) {
case IIO_VAL_FRACTIONAL:
@@ -40,6 +44,37 @@ int rescale_process_scale(struct rescale *rescale, int scale_type,
tmp *= rescale->numerator;
do_div(tmp, 1000000000LL);
*val = tmp;
+ return scale_type;
+ case IIO_VAL_INT_PLUS_NANO:
+ case IIO_VAL_INT_PLUS_MICRO:
+ mult = scale_type == IIO_VAL_INT_PLUS_NANO ? NANO : MICRO;
+
+ /*
+ * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val
+ * OR *val2 is negative the schan scale is negative, i.e.
+ * *val = 1 and *val2 = -0.5 yields -1.5 not -0.5.
+ */
+ neg = *val < 0 || *val2 < 0;
+
+ tmp = (s64)abs(*val) * abs(rescale->numerator);
+ *val = div_s64_rem(tmp, abs(rescale->denominator), &rem);
+
+ tmp = (s64)rem * mult + (s64)abs(*val2) * abs(rescale->numerator);
+ tmp = div_s64(tmp, abs(rescale->denominator));
+
+ *val += div_s64_rem(tmp, mult, val2);
+
+ /*
+ * If only one of the rescaler elements or the schan scale is
+ * negative, the combined scale is negative.
+ */
+ if (neg ^ ((rescale->numerator < 0) ^ (rescale->denominator < 0))) {
+ if (*val)
+ *val = -*val;
+ else
+ *val2 = -*val2;
+ }
+
return scale_type;
default:
return -EOPNOTSUPP;
--
2.34.0
