The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/swait.h:7,
from ./include/linux/completion.h:12,
from drivers/iio/adc/stmpe-adc.c:10:
drivers/iio/adc/stmpe-adc.c: In function 'stmpe_adc_probe':
./include/linux/find.h:98:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u32[1]' {aka 'unsigned int[1]'} [-Warray-bounds]
98 | val = *addr | ~GENMASK(size - 1, offset);
| ^~~~~
drivers/iio/adc/stmpe-adc.c:258:13: note: while referencing 'norequest_mask'
258 | u32 norequest_mask = 0;
| ^~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
---
drivers/iio/adc/stmpe-adc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index fba659bfdb40..d2d405388499 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -256,6 +256,7 @@ static int stmpe_adc_probe(struct platform_device *pdev)
struct stmpe_adc *info;
struct device_node *np;
u32 norequest_mask = 0;
+ unsigned long bits;
int irq_temp, irq_adc;
int num_chan = 0;
int i = 0;
@@ -309,8 +310,8 @@ static int stmpe_adc_probe(struct platform_device *pdev)
of_property_read_u32(np, "st,norequest-mask", &norequest_mask);
- for_each_clear_bit(i, (unsigned long *) &norequest_mask,
- (STMPE_ADC_LAST_NR + 1)) {
+ bits = norequest_mask;
+ for_each_clear_bit(i, &bits, (STMPE_ADC_LAST_NR + 1)) {
stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i);
num_chan++;
}
--
2.30.2
