Linux IDE Archive

• Thread Index

• [PATCH 1/5] sata_sil24: fix timeout calculation in sil24_softreset
  • From: Tejun Heo
• [PATCH 3/5] libata: implement ata_wait_register()
  • From: Tejun Heo
• [PATCHSET 2/9] implement and use ata_wait_register (repost)
  • From: Tejun Heo
• Re: [PATCHSET 1/9] this is the first patchset
  • From: Tejun Heo
• [PATCH 1/3] libata: set default cbl in probeinit
  • From: Tejun Heo
• [PATCH 2/3] libata: kill @verbose from ata_reset_fn_t
  • From: Tejun Heo
• [PATCH 3/3] libata: make reset methods complain when they fail
  • From: Tejun Heo
• [PATCHSET] misc reset updates (repost)
  • From: Tejun Heo
• updated new EH and hotplug support are about to be posted...
  • From: Tejun Heo
• libata-pata works on ICH4-M
  • From: Carl-Daniel Hailfinger
• Re: [PATCH/RFC] libata: fix can't free irq 14 on legacy mode pata driver
  • From: Albert Lee
• [PATCH/RFC] libata: fix can't free irq 14 on legacy mode pata driver
  • From: Unicorn Chang
• Re: [PATCH 06/13 (updated)] sata_sil24: implement loss of completion interrupt on PCI-X errta fix
  • From: Tejun Heo
• [PATCH 06/13 (updated)] sata_sil24: implement loss of completion interrupt on PCI-X errta fix
  • From: Tejun Heo
• [PATCH] SCSI: fix scsi_kill_request() busy count handling
  • From: Tejun Heo
• [RFC: 2.6 patch] drivers/ide/: possible cleanups
  • From: Adrian Bunk
• Re: [RFC: 2.6 patch] remove unused ide_init_default_hwifs()'s
  • From: Russell King
• [RFC: 2.6 patch] remove unused ide_init_default_hwifs()'s
  • From: Adrian Bunk
• question : transfer size
  • From: Raz Ben-Jehuda(caro)
• Re: [git patch] libata scsi eh fixed to use transport class
  • From: Jeff Garzik
• [git patch] libata scsi eh fixed to use transport class
  • From: Jeff Garzik
• Re: Linux Question
  • From: Jeff Garzik
• Linux Question
  • From: Carlos Pardo
• Re: Promise 20378
  • From: Phil Dibowitz
• Re: AHCI suspend support
  • From: Dominic ES. Ijichi
• AHCI suspend support
  • From: Bastian Blank
• Re: Gigabyte i-Ram cards
  • From: Jure Pečar
• HDIO_SCAN_HWIF causes hwif to "forget" PCI parent
  • From: Andrey Borzenkov
• Re: [PATCH/RFC] libata: turn on the ATAPI DMADIR support per word 62 (revised)
  • From: Jeff Garzik
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [2.6 patch] remove the obsolete IDEPCI_FLAG_FORCE_PDC
  • From: Bartlomiej Zolnierkiewicz
• [PATCH/RFC] libata: turn on the ATAPI DMADIR support per word 62 (revised)
  • From: Albert Lee
• Re: [PATCH/RFC] libata: turn on the ATAPI DMA DIR support per word 62
  • From: Albert Lee
• [PATCH 13/13] sata_sil24: enable 64bit
  • From: Tejun Heo
• [PATCH 10/13] sata_sil24: reimplement hardreset
  • From: Tejun Heo
• [PATCH 11/13] sata_sil24: don't do hardreset during driver initialization
  • From: Tejun Heo
• [PATCH 12/13] sata_sil24: fix on-memory structure byteorder
  • From: Tejun Heo
• [PATCH 09/13] sata_sil24: kill 10ms sleep in softreset
  • From: Tejun Heo
• [PATCH 08/13] sata_sil24: put port into known state before softresetting
  • From: Tejun Heo
• [PATCH 06/13] sata_sil24: implement loss of completion interrupt on PCI-X errta fix
  • From: Tejun Heo
• [PATCH 07/13] sata_sil24: implement sil24_init_port()
  • From: Tejun Heo
• [PATCH 05/13] sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS
  • From: Tejun Heo
• [PATCH 04/13] sata_sil24: add more constants
  • From: Tejun Heo
• [PATCH 01/13] libata: export ata_set_sata_spd()
  • From: Tejun Heo
• [PATCH 03/13] sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY
  • From: Tejun Heo
• [PATCH 02/13] sata_sil24: typo fix
  • From: Tejun Heo
• [PATCHSET] sata_sil24: fixes, errata workaround and reset updates, take 2
  • From: Tejun Heo
• [PATCH 5/5] sata_sil24: use ata_wait_register()
  • From: Tejun Heo
• [PATCH 2/5] sata_sil24: better error message from softreset
  • From: Tejun Heo
• [PATCH 4/5] ahci: use ata_wait_register()
  • From: Tejun Heo
• [PATCH 3/5] libata: implement ata_wait_register()
  • From: Tejun Heo
• [PATCHSET] libata: implement and use ata_wait_register()
  • From: Tejun Heo
• [PATCH 1/5] sata_sil24: fix timeout calculation in sil24_softreset
  • From: Tejun Heo
• Re: [PATCH/RFC] libata: turn on the ATAPI DMA DIR support per word 62
  • From: Jeff Garzik
• [PATCH/RFC] libata: turn on the ATAPI DMA DIR support per word 62
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Jonathan Benson
• [2.6 patch] remove the obsolete IDEPCI_FLAG_FORCE_PDC
  • From: Adrian Bunk
• Re: [PATCH 2/8] sata_sil24: fix on-memory structure byteorder
  • From: Tejun Heo
• Re: [PATCH 4/8] libata: separate out sil24_poll_register()
  • From: Jeff Garzik
• Re: [PATCH 5/8] sata_sil24: enable 64bit
  • From: Tejun Heo
• Re: [PATCH 8/8] sata_sil24: reimplement hardreset
  • From: Jeff Garzik
• Re: [PATCH 8/8] sata_sil24: reimplement hardreset
  • From: Tejun Heo
• Re: [PATCH 3/8] sata_sil24: implement loss of completion interrupt on PCI-X errta fix
  • From: Jeff Garzik
• Re: [PATCH 4/8] libata: separate out sil24_poll_register()
  • From: Tejun Heo
• Re: [PATCH 2/8] sata_sil24: fix on-memory structure byteorder
  • From: Jeff Garzik
• Re: [PATCH 5/8] sata_sil24: enable 64bit
  • From: Jeff Garzik
• Re: [PATCH 8/8] sata_sil24: reimplement hardreset
  • From: Jeff Garzik
• Re: [PATCH 4/8] libata: separate out sil24_poll_register()
  • From: Jeff Garzik
• Vendor name identification for ATAPI CD-ROM
  • From: Arunkumar S
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: [PATCHSET] sata_sil24: fixes, errata workaround and reset updates
  • From: Tejun Heo
• [PATCH/RFC] libata-dev: make the returned err_mask more accurate (revised)
  • From: Albert Lee
• Re: [PATCH/RFC] libata-dev: make the returned err_mask more accurate
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: [PATCH/RFC] libata-dev: make the returned err_mask more accurate
  • From: Tejun Heo
• [PATCH/RFC] libata-dev: make the returned err_mask more accurate
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Doug Maxey
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Tejun Heo
• Re: libata machine check on Alpha
  • From: Jeff Garzik
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: IDE CDROM tail read errors
  • From: Bill Davidsen
• Re: register/unregister SATA drive
  • From: Lukasz Kosewski
• Re: libata machine check on Alpha
  • From: Jonathan Blake Benson
• register/unregister SATA drive
  • From: Dieter Stüken
• [PATCH 4/8] libata: separate out sil24_poll_register()
  • From: Tejun Heo
• [PATCH 01/03] libata: set default cbl in probeinit
  • From: Tejun Heo
• [PATCH 8/8] sata_sil24: reimplement hardreset
  • From: Tejun Heo
• [PATCH 7/8] sata_sil24: kill 10ms sleep in softreset
  • From: Tejun Heo
• [PATCH 5/8] sata_sil24: enable 64bit
  • From: Tejun Heo
• [PATCH 6/8] sata_sil24: put port into known state before softresetting
  • From: Tejun Heo
• [PATCH 2/8] sata_sil24: fix on-memory structure byteorder
  • From: Tejun Heo
• [PATCH 3/8] sata_sil24: implement loss of completion interrupt on PCI-X errta fix
  • From: Tejun Heo
• [PATCH 1/8] libata: export ata_set_sata_spd()
  • From: Tejun Heo
• [PATCHSET] sata_sil24: fixes, errata workaround and reset updates
  • From: Tejun Heo
• [PATCH 02/11] libata: kill @verbose from ata_reset_fn_t
  • From: Tejun Heo
• Re: [PATCH 03/11] libata: make reset methods complain when they fail
  • From: Tejun Heo
• [PATCH 03/11] libata: make reset methods complain when they fail
  • From: Tejun Heo
• Re: libata machine check on Alpha
  • From: Jonathan Benson
• RE: libata machine check on Alpha
  • From: Carlos Pardo
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Jeff Garzik
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Greg Freemyer
• Re: [PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter
  • From: Jeff Garzik
• Re: [PATCH] ahci: do not fail softreset if PHY reports no device
  • From: Jeff Garzik
• Re: [PATCH] libata-dev: irq-pio minor fix
  • From: Jeff Garzik
• Re: libata/sata status on ich[?]
  • From: Tejun Heo
• Re: EH merge
  • From: Tejun Heo
• EH merge
  • From: Jeff Garzik
• Re: libata/sata status on ich[?]
  • From: Jeff Garzik
• Re: libata/sata status on ich[?]
  • From: Tejun Heo
• Re: libata/sata status on ich[?]
  • From: Jeff Garzik
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Jeff Garzik
• Re: libata machine check on Alpha
  • From: Jeff Garzik
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Albert Lee
• Re: [PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter
  • From: Tejun Heo
• Re: libata machine check on Alpha
  • From: Tejun Heo
• [PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: sata_mv: module reloading doesn't work
  • From: Mark Lord
• Re: libata machine check on Alpha
  • From: Tejun Heo
• Re: libata machine check on Alpha
  • From: Albert Lee
• Re: libata machine check on Alpha
  • From: Tejun Heo
• Re: [2.6 patch] always enable CONFIG_PDC202XX_FORCE
  • From: Tobias Oed
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• libata machine check on Alpha
  • From: Jonathan Blake Benson
• Re: hpt366 driver oops or panic with HighPoint RocketRAID 1520 SATA (HPT372N)
  • From: Sergei Shtylyov
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Jeff Garzik
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Greg Freemyer
• Re: [PATCH] move ->eh_strategy_handler to the transport class
  • From: Jeff Garzik
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Jeff Garzik
• [PATCH] libata-dev: irq-pio minor fix 2
  • From: Albert Lee
• [PATCH] libata-dev: irq-pio minor fix
  • From: Albert Lee
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Albert Lee
• [PATCH 12/14] ahci: add HOST_CAP_NCQ constant
  • From: Tejun Heo
• [PATCH 14/14] ahci: implement NCQ suppport
  • From: Tejun Heo
• [PATCH 13/14] ahci: kill pp->cmd_tbl_sg
  • From: Tejun Heo
• [PATCH 11/14] libata: clean up AHCI constants in preparation for NCQ
  • From: Tejun Heo
• [PATCH 10/14] libata: implement ata_ncq_complete()
  • From: Tejun Heo
• [PATCH 09/14] libata: implement NCQ device configuration
  • From: Tejun Heo
• [PATCH 05/14] libata: implement command exclusion
  • From: Tejun Heo
• [PATCH 07/14] libata: implement ata_eh_read_log_10h()
  • From: Tejun Heo
• [PATCH 08/14] libata: update EH to handle NCQ
  • From: Tejun Heo
• [PATCH 06/14] libata: implement NCQ command translation
  • From: Tejun Heo
• [PATCH 03/14] libata: pass ata_scsi_translate() return value to SCSI midlayer
  • From: Tejun Heo
• [PATCH 04/14] libata: implement ap->sactive
  • From: Tejun Heo
• [PATCHSET] libata: add NCQ support
  • From: Tejun Heo
• [PATCH 02/14] libata: add NCQ related libata flags
  • From: Tejun Heo
• [PATCH 01/14] libata: add NCQ related ATA constants and id macros
  • From: Tejun Heo
• [PATCH 08/13] libata: implement ata_eh_revive()
  • From: Tejun Heo
• [PATCH 06/13] libata: implement ata_eh_autopsy()
  • From: Tejun Heo
• [PATCH 09/13] libata: implement ata_eh_finish_qcs()
  • From: Tejun Heo
• [PATCH 10/13] libata: implement EH methods for BMDMA controllers
  • From: Tejun Heo
• [PATCH 13/13] ahci: convert to new EH
  • From: Tejun Heo
• [PATCH 12/13] sata_sil: convert to new EH
  • From: Tejun Heo
• [PATCH 08/13] libata: implement ata_eh_revive()
  • From: Tejun Heo
• [PATCH 07/13] libata: implement ata_eh_report()
  • From: Tejun Heo
• [PATCH 11/13] ata_piix: convert to new EH
  • From: Tejun Heo
• [PATCH 05/13] libata: implement ata_eh_determine_qc()
  • From: Tejun Heo
• [PATCHSET] new EH implementation
  • From: Tejun Heo
• [PATCH 02/13] libata: implement ata_ering
  • From: Tejun Heo
• [PATCH 01/13] libata: add constants and flags to be used by EH
  • From: Tejun Heo
• [PATCH 03/13] libata: add per-dev ata_ering
  • From: Tejun Heo
• [PATCH 04/13] libata: implement EH utility functions
  • From: Tejun Heo
• Re: [PATCHSET] new EH implementation
  • From: Tejun Heo
• [PATCH] ahci: convert to new EH
  • From: Tejun Heo
• [PATCH] ata_piix: convert to new EH
  • From: Tejun Heo
• [PATCH] sata_sil: convert to new EH
  • From: Tejun Heo
• [PATCH] libata: implement EH methods for BMDMA controllers
  • From: Tejun Heo
• [PATCH] libata: implement ata_eh_finish_qcs()
  • From: Tejun Heo
• [PATCH] libata: implement ata_eh_autopsy()
  • From: Tejun Heo
• [PATCH] libata: implement ata_eh_revive()
  • From: Tejun Heo
• [PATCH] libata: implement ata_eh_report()
  • From: Tejun Heo
• [PATCH] libata: implement ata_eh_determine_qc()
  • From: Tejun Heo
• [PATCH] libata: implement EH utility functions
  • From: Tejun Heo
• [PATCH] libata: implement ata_ering
  • From: Tejun Heo
• [PATCH] libata: add per-dev ata_ering
  • From: Tejun Heo
• [PATCHSET] new EH implementation
  • From: Tejun Heo
• [PATCH] libata: add constants and flags to be used by EH
  • From: Tejun Heo
• Re: [PATCH 1/2] SCSI: implement scsi_eh_schedule_cmd()
  • From: Tejun Heo
• Re: [PATCH 1/2] SCSI: implement scsi_eh_schedule_cmd()
  • From: Luben Tuikov
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• Re: [PATCHSET] new EH framework
  • From: Tejun Heo
• [PATCH 05/13] libata: update ata_qc_from_tag() to enforce normal/EH qc ownership
  • From: Tejun Heo
• [PATCH 13/13] libata: update ata_interrupt() to handle frozen port properly
  • From: Tejun Heo
• [PATCH 07/13] libata: implement ata_eh_schedule_port()
  • From: Tejun Heo
• [PATCH 08/13] libata: implement new EH scheduling via timeout
  • From: Tejun Heo
• [PATCH 12/13] libata: update SCSI command completion path for new EH
  • From: Tejun Heo
• [PATCH 06/13] libata: implement new EH scheduling via error completion
  • From: Tejun Heo
• [PATCH 11/13] libata: activate ->post_internal_cmd
  • From: Tejun Heo
• [PATCH 10/13] libata: activate ->error_handler
  • From: Tejun Heo
• [PATCH 09/13] libata: implement new EH scheduling from PIO
  • From: Tejun Heo
• [PATCH 02/13] libata: add new EH operations
  • From: Tejun Heo
• [PATCHSET] new EH framework
  • From: Tejun Heo
• [PATCH 04/13] libata: implement ata_port_freeze()
  • From: Tejun Heo
• [PATCH 03/13] libata: use special reserved tag and qc for internal commands
  • From: Tejun Heo
• [PATCH 01/13] libata: add flags for new EH
  • From: Tejun Heo
• Re: IDE CDROM tail read errors
  • From: Jan Engelhardt
• Re: sata_mv: module reloading doesn't work
  • From: Eric D. Mudama
• [PATCH] ahci: do not fail softreset if PHY reports no device
  • From: Tejun Heo
• Re: New probe code causes boot delay on empty ports
  • From: Tejun Heo
• Re: sata_mv: module reloading doesn't work
  • From: Mark Lord
• New probe code causes boot delay on empty ports
  • From: Jeff Garzik
• Re: sata_mv: module reloading doesn't work
  • From: Dan Aloni
• [PATCH 2/2] SCSI: implement scsi_eh_schedule_host()
  • From: Tejun Heo
• Re: sata_mv: module reloading doesn't work
  • From: Mark Lord
• [PATCH 1/2] SCSI: implement scsi_eh_schedule_cmd()
  • From: Tejun Heo
• sata_mv: module reloading doesn't work
  • From: Dan Aloni
• Re: [PATCH] libata: print SControl in SATA link status info message
  • From: Jeff Garzik
• [PATCH] libata: print SControl in SATA link status info message
  • From: Tejun Heo
• Re: [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Jeff Garzik
• [PATCH 4/7] libata: add 5s sleep between resets
  • From: Tejun Heo
• [PATCH 2/7] libata: implement ap->sata_spd_limit and helpers
  • From: Tejun Heo
• Re: Spradic device disconnections
  • From: Jeff Garzik
• Re: [PATCH 2/7] libata: implement ap->sata_spd_limit and helpers
  • From: Jeff Garzik
• Re: [PATCH 2/7] libata: implement ap->sata_spd_limit and helpers
  • From: Tejun Heo
• Re: IDE CDROM tail read errors
  • From: Krzysztof Halasa
• Re: IDE CDROM tail read errors
  • From: Krzysztof Halasa
• Re: [PATCH 6/7] libata: improve ata_bus_probe()
  • From: Jeff Garzik
• Re: [PATCH 2/7] libata: implement ap->sata_spd_limit and helpers
  • From: Jeff Garzik
• Oops after assertion in drivers/scsi/libata-core.c
  • From: David Greaves
• [PATCH 14/15] libata: separate out libata-eh.c
  • From: Tejun Heo
• [PATCH 13/15] libata: dec scmd->retries for qcs with zero err_mask
  • From: Tejun Heo
• [PATCH 15/15] libata: make some libata-core routines extern
  • From: Tejun Heo
• [PATCH 05/15] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
  • From: Tejun Heo
• [PATCH 10/15] libata: always generate sense if qc->err_mask is non-zero
  • From: Tejun Heo
• [PATCH 11/15] libata: don't read TF directly from sense generation functions
  • From: Tejun Heo
• [PATCH 08/15] libata: add ATA_QCFLAG_IO
  • From: Tejun Heo
• [PATCH 09/15] libata: pass qc around intead of ap during PIO
  • From: Tejun Heo
• [PATCH 07/15] libata: clear ATA_DFLAG_PIO before setting it
  • From: Tejun Heo
• [PATCH 06/15] libata: clear only affected flags during ata_dev_configure()
  • From: Tejun Heo
• [PATCHSET] libata: prep for new EH, take 2
  • From: Tejun Heo
• [PATCH 12/15] libata: add @cdb to ata_exec_internal()
  • From: Tejun Heo
• [PATCH 04/15] libata: clean up constants
  • From: Tejun Heo
• [PATCH 03/15] libata: ATA_FLAG_IN_EH is not used, kill it
  • From: Tejun Heo
• [PATCH 02/15] libata: ata_dev_revalidate() printk update
  • From: Tejun Heo
• [PATCH 01/15] libata: report device number when PIO fails
  • From: Tejun Heo
• [PATCH 6/7] libata: improve ata_bus_probe()
  • From: Tejun Heo
• [PATCH 7/7] libata: consider disabled devices in ata_dev_xfermask()
  • From: Tejun Heo
• [PATCH 5/7] libata: implement ata_down_xfermask_limit()
  • From: Tejun Heo
• [PATCH 2/7] libata: implement ap->sata_spd_limit and helpers
  • From: Tejun Heo
• [PATCH 1/7] libata: implement ata_dev_absent()
  • From: Tejun Heo
• [PATCH 4/7] libata: add 5s sleep between resets
  • From: Tejun Heo
• [PATCH 3/7] libata: use SATA speed down in ata_drive_probe_reset()
  • From: Tejun Heo
• [PATCHSET] libata: improve ata_bus_probe failure handling, take 2
  • From: Tejun Heo
• Re: [PATCH 10/15] libata: add dev->sata_spd_limit and helpers
  • From: Jeff Garzik
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Jeff Garzik
• Re: sata_sil or libata?
  • From: Wesley Lim
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Tejun Heo
• Re: sata_sil or libata?
  • From: Wesley Lim
• Re: sata_sil or libata?
  • From: Mark Hahn
• Re: sata_sil or libata?
  • From: Wesley Lim
• Re: [PATCH] SCSI: implement scsi_eh_schedule()
  • From: Tejun Heo
• Re: [PATCH 15/15] libata: consider disabled devices in ata_dev_xfermask()
  • From: Tejun Heo
• Re: [PATCH 13/15] libata: add 1s sleep between resets
  • From: Tejun Heo
• Re: [PATCH 12/15] libata: use SATA speeding down in ata_drive_probe_reset()
  • From: Tejun Heo
• Re: [PATCH 10/15] libata: add dev->sata_spd_limit and helpers
  • From: Tejun Heo
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Tejun Heo
• Re: [PATCH 05/15] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• Re: [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15
  • From: Kyle Moffett
• Re: sata_sil or libata?
  • From: David Greaves
• sata_sil or libata?
  • From: Wesley Lim
• Re: [PATCH] SCSI: implement scsi_eh_schedule()
  • From: Jeff Garzik
• Re: [PATCH 10/14] libata: don't read TF directly from sense generation functions
  • From: Jeff Garzik
• Re: [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero
  • From: Jeff Garzik
• Re: [PATCH 04/14] libata: clean up constants
  • From: Jeff Garzik
• Re: [PATCH 15/15] libata: consider disabled devices in ata_dev_xfermask()
  • From: Jeff Garzik
• Re: [PATCH 14/15] libata: improve ata_bus_probe()
  • From: Jeff Garzik
• Re: [PATCH 13/15] libata: add 1s sleep between resets
  • From: Jeff Garzik
• Re: [PATCH 12/15] libata: use SATA speeding down in ata_drive_probe_reset()
  • From: Jeff Garzik
• Re: [PATCH 11/15] libata: preserve SATA SPD setting over hard resets
  • From: Jeff Garzik
• Re: [PATCH 10/15] libata: add dev->sata_spd_limit and helpers
  • From: Jeff Garzik
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Jeff Garzik
• Re: [PATCH 08/15] libata: don't disable devices from ata_set_mode()
  • From: Jeff Garzik
• Re: [PATCH/RFC] libata-dev: handle DRQ=1 ERR=1 (revised)
  • From: Jeff Garzik
• Re: [PATCH] move ->eh_strategy_handler to the transport class
  • From: Jeff Garzik
• Re: [PATCH] move ->eh_strategy_handler to the transport class
  • From: James Bottomley
• Re: [PATCH] move ->eh_strategy_handler to the transport class
  • From: Jeff Garzik
• Re: [PATCH 01/15] libata: fix ata_set_mode() return value
  • From: Jeff Garzik
• Re: [PATCH 05/15] libata: implement ata_dev_enabled and disabled()
  • From: Jeff Garzik
• Spradic device disconnections
  • From: Dan Aloni
• Re: [PATCH/RFC] libata: disable interrupts before soft reset
  • From: Albert Lee
• Re: [PATCH 1/1] libata-dev: ata_check_atapi_dma() fix for ATA_FLAG_PIO_POLLING LLDDs
  • From: Albert Lee
• Re: [PATCHSET] libata: prep for new EH
  • From: Tejun Heo
• [PATCH 08/14] libata: pass qc around intead of ap during PIO
  • From: Tejun Heo
• [PATCH 13/14] libata: separate out libata-eh.c
  • From: Tejun Heo
• [PATCH 14/14] libata: make some libata-core routines extern
  • From: Tejun Heo
• [PATCH 12/14] libata: dec scmd->retries for qcs with zero err_mask
  • From: Tejun Heo
• [PATCH 11/14] libata: add @cdb to ata_exec_internal()
  • From: Tejun Heo
• [PATCH 07/14] libata: add ATA_QCFLAG_IO
  • From: Tejun Heo
• [PATCH 10/14] libata: don't read TF directly from sense generation functions
  • From: Tejun Heo
• [PATCH 09/14] libata: always generate sense if qc->err_mask is non-zero
  • From: Tejun Heo
• [PATCH 03/14] libata: ATA_FLAG_IN_EH is not used, kill it
  • From: Tejun Heo
• [PATCH 05/14] libata: clear only affected flags during ata_dev_configure()
  • From: Tejun Heo
• [PATCH 06/14] libata: clear ATA_DFLAG_PIO before setting it
  • From: Tejun Heo
• [PATCH 04/14] libata: clean up constants
  • From: Tejun Heo
• [PATCHSET] libata: prep for new EH
  • From: Tejun Heo
• [PATCH 02/14] libata: ata_dev_revalidate() printk update
  • From: Tejun Heo
• [PATCH 01/14] libata: report device number when PIO fails
  • From: Tejun Heo
• [PATCH] SCSI: implement scsi_eh_schedule()
  • From: Tejun Heo
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Stefan Richter
• [PATCH/RFC] libata-dev: handle DRQ=1 ERR=1 (revised)
  • From: Albert Lee
• Re: On the subject of DRQ and EH...
  • From: Albert Lee
• Re: [PATCH 1/1] libata: use AC_ERR_TIMEOUT err_mask for time out
  • From: Jeff Garzik
• On the subject of DRQ and EH...
  • From: Jeff Garzik
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Tejun Heo
• Re: [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15
  • From: Kyle Moffett
• Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4, SATA 300 TX4
  • From: Fabian Knittel
• Re: [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Alan Cox
• Re: [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15
  • From: Eric D. Mudama
• [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15
  • From: Kyle Moffett
• [PATCH 17/33] pcmcia: add pcmcia_disable_device
  • From: Dominik Brodowski
• Re: [PATCH 1/2] libata: fix ata_qc_issue failure path
  • From: Tejun Heo
• Re: [PATCH 1/1] libata: convert pata_pdc2027x to the new reset mechanism
  • From: Tejun Heo
• Re: [PATCH 1/1] libata: use AC_ERR_TIMEOUT err_mask for time out
  • From: Tejun Heo
• Re: [PATCH 1/1] libata: use AC_ERR_TIMEOUT err_mask for time out
  • From: Tejun Heo
• [PATCH 12/15] libata: use SATA speeding down in ata_drive_probe_reset()
  • From: Tejun Heo
• [PATCH 11/15] libata: preserve SATA SPD setting over hard resets
  • From: Tejun Heo
• [PATCH 15/15] libata: consider disabled devices in ata_dev_xfermask()
  • From: Tejun Heo
• [PATCH 14/15] libata: improve ata_bus_probe()
  • From: Tejun Heo
• [PATCH 13/15] libata: add 1s sleep between resets
  • From: Tejun Heo
• [PATCH 05/15] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• [PATCH 06/15] libata: make ata_set_mode() handle no-device case properly
  • From: Tejun Heo
• [PATCH 08/15] libata: don't disable devices from ata_set_mode()
  • From: Tejun Heo
• [PATCH 09/15] libata: implement ata_down_xfermask_limit()
  • From: Tejun Heo
• [PATCH 10/15] libata: add dev->sata_spd_limit and helpers
  • From: Tejun Heo
• [PATCHSET] libata: improve ata_bus_probe failure handling
  • From: Tejun Heo
• [PATCH 07/15] libata: reorganize ata_set_mode()
  • From: Tejun Heo
• [PATCH 04/15] libata: convert do_probe_reset() to ata_do_reset()
  • From: Tejun Heo
• [PATCH 01/15] libata: fix ata_set_mode() return value
  • From: Tejun Heo
• [PATCH 03/15] libata: separate out ata_spd_string()
  • From: Tejun Heo
• [PATCH 02/15] libata: make ata_bus_probe() return negative errno on failure
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: fix ata_qc_issue failure path
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ata_xfer_tbl termination
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: fix ich6/m_map_db
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata-dev: print out information for ATAPI devices with CDB interrupts
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata: use AC_ERR_TIMEOUT err_mask for time out
  • From: Jeff Garzik
• [PATCH] libata: fix ata_xfer_tbl termination
  • From: Tejun Heo
• [PATCH 2/2] libata: make ata_qc_issue complete failed qcs
  • From: Tejun Heo
• [PATCH 1/2] libata: fix ata_qc_issue failure path
  • From: Tejun Heo
• [PATCH] ata_piix: fix ich6/m_map_db
  • From: Tejun Heo
• Re: [PATCH/RFC] libata: disable interrupts before soft reset
  • From: Tejun Heo
• [PATCH/RFC] libata: disable interrupts before soft reset
  • From: Albert Lee
• [PATCH 1/1] libata: use AC_ERR_TIMEOUT err_mask for time out
  • From: Albert Lee
• [PATCH 1/1] libata-dev: print out information for ATAPI devices with CDB interrupts
  • From: Albert Lee
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• Re: [Bugme-new] [Bug 6311] New: libata/sata_sil Oops on boot
  • From: Andrew Morton
• [PATCH 2.6.16-g6ac37e95-dirty] ide: ATI SB600 IDE support
  • From: Anatoli Antonovitch
• RE: [PATCH 2.6.16-g6ac37e95-dirty] scsi: ATI SB600 SATA support
  • From: Anatoli Antonovitch
• Re: [PATCH 2.6.16-g6ac37e95-dirty] scsi: ATI SB600 SATA support
  • From: Jeff Garzik
• Re: [PATCH 2.6.16-g6ac37e95-dirty] ide: ATI SB600 IDE support
  • From: Andrew Morton
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Jeff Garzik
• [PATCH 2.6.16-g6ac37e95-dirty] scsi: ATI SB600 SATA support
  • From: Anatoli Antonovitch
• [PATCH 2.6.16-g6ac37e95-dirty] ide: ATI SB600 IDE support
  • From: Anatoli Antonovitch
• [PATCH] ppc32/ide: Add support for MPC52xx on-chip ATA controller
  • From: Sylvain Munaut
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: IDE CDROM tail read errors
  • From: Alan Cox
• Re: IDE CDROM tail read errors
  • From: Jan Engelhardt
• [PATCH 1/1] libata: convert pata_pdc2027x to the new reset mechanism
  • From: Albert Lee
• Re: [PATCH 2.6.16] sata_mv.c :: three bug fixes
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata: ata_dev_init_params() fixes
  • From: Jeff Garzik
• ata_piix sata disk timeout from the power adapter./batterry on T43p
  • From: Bradford Arrington
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Jeff Garzik
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata-dev: irq-pio minor fixes (respin)
  • From: Jeff Garzik
• [PATCH] IDE: always release DMA engine
  • From: Sergei Shtylylov
• IDE CDROM tail read errors
  • From: Krzysztof Halasa
• Re: [PATCH 2.6.16] sata_mv.c :: three bug fixes
  • From: Mark Lord
• Re: [PATCH 2.6.16] sata_mv.c :: three bug fixes
  • From: Dan Aloni
• Re: [PATCH 05/10] ipr: Disk remove path cleanup
  • From: Brian King
• Re: [PATCH 05/10] ipr: Disk remove path cleanup
  • From: Christoph Hellwig
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Christoph Hellwig
• [PATCH 2.6.16] sata_mv.c :: three bug fixes
  • From: Mark Lord
• [PATCH 10/10] ipr: Support attaching SATA devices
  • From: Brian King
• [PATCH 09/10] ipr: Reset device cleanup
  • From: Brian King
• [PATCH 07/10] ipr: Simplify status area dumping
  • From: Brian King
• [PATCH 08/10] ipr: printk macro cleanup/removal
  • From: Brian King
• [PATCH 05/10] ipr: Disk remove path cleanup
  • From: Brian King
• [PATCH 04/10] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• [PATCH 06/10] ipr: Fixup device type check
  • From: Brian King
• [PATCH 01/10] libata: Setup nbytes in ata_sg_init_one
  • From: Brian King
• [PATCH 03/10] libata: Conditionally set host->max_cmd_len
  • From: Brian King
• [PATCH 02/10] libata: Add host lock to struct ata_port
  • From: Brian King
• [PATCH 0/10] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Alan Cox
• (X)FS corruption on 2 SATA disk RAID 1
  • From: JaniD++
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Christoph Hellwig
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: James Bottomley
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: James Bottomley
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: James Bottomley
• [PATCH 0/2] scsi: Add max_cmd_len to struct scsi_device
  • From: Brian King
• [PATCH 2/2] libata: Use scsi_device max_cmd_len
  • From: Brian King
• [PATCH 1/2] scsi: Add scsi_device max_cmd_len
  • From: Brian King
• Re: [PATCH] IDE: claim extra DMA ports regardless of channel
  • From: Sergei Shtylylov
• Re: [PATCH] IDE: claim extra DMA ports regardless of channel
  • From: Andrew Morton
• [PATCH] IDE: remove 'dma_base2' field form 'ide_hwif_t'
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Alan Cox
• [PATCH] IDE: claim extra DMA ports regardless of channel
  • From: Sergei Shtylylov
• [2.6.15] New ATA error messages on upgrade to 2.6.15
  • From: Kyle Moffett
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Matt Heler
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Matt Heler
• Re: satapii vs ahci
  • From: Tejun Heo
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Bill Rugolsky Jr.
• Re: [2.6 patch] always enable CONFIG_PDC202XX_FORCE
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] always enable CONFIG_PDC202XX_FORCE
  • From: Sergei Shtylylov
• [PATCH]: Allow atapi dma with pdc202xx_old
  • From: Tobias Oed
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: raid and elevator
  • From: Jens Axboe
• Re: buffer size in the elevator
  • From: Jens Axboe
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Alan Cox
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: + fix-ide-dma-resource-managment.patch added to -mm tree
  • From: Sergei Shtylylov
• Re: [PATCH 1/1] libata: ata_dev_init_params() fixes
  • From: Tejun Heo
• [PATCH 1/1] libata: ata_dev_init_params() fixes
  • From: Albert Lee
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Matt Heler
• buffer size in the elevator
  • From: Raz Ben-Jehuda(caro)
• raid and elevator
  • From: Raz Ben-Jehuda(caro)
• sata_sil qc timeout on 2.6.15 & 2.6.16, 2.6.14 is fine...
  • From: Clem Taylor
• satapii vs ahci
  • From: Raz Ben-Jehuda(caro)
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: add @disable_on_err argument to ata_set_mode()
  • From: Alan Cox
• Re: [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Alan Cox
• [PATCH] libata: kill trailing whitespace
  • From: Tejun Heo
• [PATCH 3/3] libata-dev: wait idle after reading the last data block
  • From: Albert Lee
• [PATCH 2/3] libata-dev: fix the device err check sequence (respin)
  • From: Albert Lee
• [PATCH 1/3] libata-dev: irq-pio minor fixes (respin)
  • From: Albert Lee
• IDE sysfs corrupted (second IDE channel parent lost) after resume from STR
  • From: Andrey Borzenkov
• [PATCH 2/2] libata: add @disable_on_err argument to ata_set_mode()
  • From: Tejun Heo
• [PATCH 1/2] libata: implement ata_dev_enabled and disabled()
  • From: Tejun Heo
• Re: PATCH: blacklist update
  • From: Chisato Yamauchi
• Re: [PATCH 2/2] libata: add @disable_on_err argument to ata_set_mode()
  • From: Tejun Heo
• [patch 04/20] 2.6.xx: sata_mv: another critical fix
  • From: Greg KH
• [patch 01/20] sata_mv: fix irq port status usage
  • From: Greg KH
• Re: [PATCH] libata: add FIXME above ata_dev_xfermask()
  • From: Jeff Garzik
• Re: [PATCH] libata: cosmetic changes in ata_bus_softreset()
  • From: Jeff Garzik
• Re: [PATCH 2/2] libata: add @disable_on_err argument to ata_set_mode()
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: implement ata_dev_enabled, disabled and present()
  • From: Jeff Garzik
• [PATCH] libata: add FIXME above ata_dev_xfermask()
  • From: Tejun Heo
• [PATCH 2/2] libata: add @disable_on_err argument to ata_set_mode()
  • From: Tejun Heo
• [PATCH 1/2] libata: implement ata_dev_enabled, disabled and present()
  • From: Tejun Heo
• [PATCH] libata: cosmetic changes in ata_bus_softreset()
  • From: Tejun Heo
• Re: [PATCH] libata: kill E.D.D.
  • From: Alan Cox
• Re: [PATCH 1/2] libata-dev: irq-pio minor fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: cosmetic changes in ata_bus_softreset()
  • From: Jeff Garzik
• Re: [PATCH] libata: kill E.D.D.
  • From: Jeff Garzik
• [PATCH] libata: kill E.D.D.
  • From: Tejun Heo
• [PATCH] libata: cosmetic changes in ata_bus_softreset()
  • From: Tejun Heo
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 5/5] libata: add @disable_on_err argument to ata_set_mode()
  • From: Alan Cox
• Re: [PATCH] libata: cosmetic change in ata_bus_softreset()
  • From: Jeff Garzik
• Re: [PATCH 5/5] libata: add @disable_on_err argument to ata_set_mode()
  • From: Jeff Garzik
• Re: [PATCH 1/5] libata: check if port is disabled after internal command
  • From: Jeff Garzik
• Re: [PATCH] libata: cosmetic change in ata_bus_softreset()
  • From: Jeff Garzik
• Re: [PATCH 2/3] libata: add per-dev pio/mwdma/udma_mask
  • From: Jeff Garzik
• [PATCH 5/5] libata: add @disable_on_err argument to ata_set_mode()
  • From: Tejun Heo
• [PATCH 1/5] libata: check if port is disabled after internal command
  • From: Tejun Heo
• [PATCH 3/5] libata: use ata_dev_disable() in ata_bus_probe()
  • From: Tejun Heo
• [PATCH 2/5] libata: implement ata_dev_disable()
  • From: Tejun Heo
• [PATCH 4/5] libata: make ata_set_mode() responsible for failure handling
  • From: Tejun Heo
• [PATCHSET] libata: add @disable_on_err to ata_set_mode(), take#2
  • From: Tejun Heo
• [PATCH 2/3] libata: add per-dev pio/mwdma/udma_mask
  • From: Tejun Heo
• [PATCH 3/3] libata: make per-dev transfer mode limits per-dev
  • From: Tejun Heo
• [PATCHSET] libata: implement per-dev xfer masks, take#2
  • From: Tejun Heo
• [PATCH 1/3] libata: implement ata_unpack_xfermask()
  • From: Tejun Heo
• [PATCH] Support for DMA on ICH6M / piix.
  • From: Uwe Hermann
• Re: sata_sil did not like multiple LUNs...
  • From: Tejun Heo
• [PATCH] libata: cosmetic change in ata_bus_softreset()
  • From: Tejun Heo
• [PATCH 3/3] libata: Remove dependence on host_set->dev for SAS
  • From: Brian King
• [PATCH 1/3] libata: ata_scsi_queuecmd cleanup
  • From: Brian King
• [PATCH 2/3] libata: ata_scsi_ioctl cleanup
  • From: Brian King
• [PATCH 0/3] libata: SAS HBA support resend of ACK'ed patches
  • From: Brian King
• Re: Gigabyte i-Ram cards
  • From: Tejun Heo
• Re: Gigabyte i-Ram cards
  • From: Mogens Valentin
• Re: Resume problems on Fujitsu-Siemens AMILO M7440G -- SATA
  • From: Michael Schierl
• [PATCH/RFC 2/2] libata-dev: fix the device err check sequence
  • From: Albert Lee
• Re: [PATCH 1/2] libata-dev: irq-pio minor fixes
  • From: Jeff Garzik
• [PATCH 1/2] libata-dev: irq-pio minor fixes
  • From: Albert Lee
• [PATCH] Several recent libata commits
  • From: Jeff Garzik
• Re: [git patches] libata updates
  • From: Jeff Garzik
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH] libata: do not ignore PIO-only devices
  • From: Jeff Garzik
• Re: [PATCH] ahci: add softreset
  • From: Jeff Garzik
• Re: [PATCH] Fix IDE DMA resource managment
  • From: Sergei Shtylylov
• Re: [PATCH 05/15] libata: Add __ata_scsi_ioctl
  • From: Jeff Garzik
• Re: [PATCH 04/15] libata: ata_scsi_queuecmd cleanup
  • From: Jeff Garzik
• Re: Gigabyte i-Ram cards
  • From: Jeff Garzik
• Re: [PATCH 06/15] libata: Stop using host->max_cmd_len
  • From: Brian King
• Re: [PATCH 05/15] libata: Add __ata_scsi_ioctl
  • From: Brian King
• Re: [PATCH 04/15] libata: ata_scsi_queuecmd cleanup
  • From: Brian King
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Eric D. Mudama
• Re: Problems with multiple Promise SATA150 TX4 cards
  • From: Ian Oliver
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• Re: LibPATA code issues / 2.6.15.4
  • From: David Greaves
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: [PATCH 01/15] libata: Setup nbytes in ata_sg_init_one
  • From: Brian King
• Re: Gigabyte i-Ram cards
  • From: Bryan Fink
• Re: [PATCH] libata: do not ignore PIO-only devices
  • From: Tejun Heo
• [PATCH] ahci: add softreset
  • From: Tejun Heo
• [PATCH] libata: do not ignore PIO-only devices
  • From: Tejun Heo
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Tejun Heo
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• Re: Gigabyte i-Ram cards
  • From: Jens Axboe
• Re: Gigabyte i-Ram cards
  • From: Mogens Valentin
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• Re: drivers/scsi/sata_vsc.c: inconsistent NULL checking
  • From: Jeff Garzik
• libata ignores non-dma disks?
  • From: Ed Sweetman
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Jeff Garzik
• Re: [PATCH 07/15] libata: Remove dependence on host_set->dev for SAS
  • From: Jeff Garzik
• Re: [PATCH 02/15] libata: Add some dummy noop functions
  • From: Jeff Garzik
• Re: [PATCH 06/15] libata: Stop using host->max_cmd_len
  • From: Jeff Garzik
• Re: [PATCH 05/15] libata: Add __ata_scsi_ioctl
  • From: Jeff Garzik
• Re: [PATCH 04/15] libata: ata_scsi_queuecmd cleanup
  • From: Jeff Garzik
• Re: [PATCH 01/15] libata: Setup nbytes in ata_sg_init_one
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata-dev: Remove ATA_PROT_PIO_MULT
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata-dev: add flush task to ata_exec_internal()
  • From: Jeff Garzik
• Re: libata SCSI page 0x83 query
  • From: Jeff Garzik
• Re: Gigabyte i-Ram cards
  • From: Jure Pečar
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Benjamin Herrenschmidt
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Jeff Garzik
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Linus Torvalds
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Jeff Garzik
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Linus Torvalds
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: James Bottomley
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• [PATCH] Fix IDE DMA resource managment
  • From: Sergei Shtylylov
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jens Axboe
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: libata+SGIO: is .dma_boundary respected?
  • From: James Bottomley
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jens Axboe
• Re: Some sata_mv error messages
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: Some sata_mv error messages
  • From: Jeff Garzik
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jens Axboe
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Linus Torvalds
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jens Axboe
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: Some sata_mv error messages
  • From: Denis Leroy
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• sata_sil did not like multiple LUNs...
  • From: Matti Aarnio
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jens Axboe
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Linus Torvalds
• Re: sata_promise does not see hardware RAID arrays on Fasttrak TX4000
  • From: Phillip Susi
• Re: LibPATA code issues / 2.6.15.4
  • From: David Greaves
• Re: sata_promise does not see hardware RAID arrays on Fasttrak TX4000
  • From: Gordon Atwood
• Re: [PATCH/RFC] libata-dev: handle ERR=1 DRQ=1
  • From: Eric D. Mudama
• Re: [PATCH/RFC] libata-dev: handle ERR=1 DRQ=1
  • From: Jeff Garzik
• Re: [git patches] libata updates
  • From: Alan Cox
• Re: [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH] AHCI SATA vendor update from VIA
  • From: Jeff Garzik
• Re: Resume problems on Fujitsu-Siemens AMILO M7440G -- SATA
  • From: martin schneebacher
• Re: Some sata_mv error messages
  • From: Peter Jones
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• Re: Resume problems on Fujitsu-Siemens AMILO M7440G -- SATA
  • From: Michael Schierl
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: sata_Re: sata_mv success on 2.6.16-rc6-mm2
  • From: Mark Lord
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Bill Rugolsky Jr.
• Marvell SATA Support ... problem
  • From: Leopold Palomo Avellaneda
• Re: [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Sander
• [PATCH/RFC] libata-dev: handle ERR=1 DRQ=1
  • From: Albert Lee
• Re: [PATCH] AHCI SATA vendor update from VIA
  • From: Tejun Heo
• Re: sata_Re: sata_mv success on 2.6.16-rc6-mm2
  • From: Andrew Morton
• Re: sata_Re: sata_mv success on 2.6.16-rc6-mm2
  • From: Sander
• Re: [PATCH 3/4] libata: add per-dev pio/mwdma/udma_mask
  • From: Alan Cox
• Re: [git patches] libata updates
  • From: Alan Cox
• Re: Some sata_mv error messages
  • From: Sander
• Re: Some sata_mv error messages
  • From: Sander
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• [PATCH] 2.6.xx: sata_mv: another critical fix
  • From: Mark Lord
• Re: Some sata_mv error messages
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: Gigabyte i-Ram cards
  • From: Eric D. Mudama
• Re: Some sata_mv error messages
  • From: Jeff Garzik
• Re: Some sata_mv error messages
  • From: Dave Jones
• Gigabyte i-Ram cards
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata: add per-dev pio/mwdma/udma_mask
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata: make ata_set_mode() responsible for failure handling
  • From: Jeff Garzik
• Re: [PATCH] AHCI SATA vendor update from VIA
  • From: Jeff Garzik
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Jeff Garzik
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: [git patches] libata updates
  • From: Jeff Garzik
• Re: Some sata_mv error messages
  • From: Jeff Garzik
• [git patch append] sata_mv fix
  • From: Jeff Garzik
• Re: sata_promise does not see hardware RAID arrays on Fasttrak TX4000
  • From: Jeff Garzik
• sata_promise does not see hardware RAID arrays on Fasttrak TX4000
  • From: Gordon Atwood
• Re: Resume problems on Fujitsu-Siemens AMILO M7440G -- SATA
  • From: Mark Lord
• Re: Resume problems on Fujitsu-Siemens AMILO M7440G -- SATA
  • From: Michael Schierl
• Re: [git patches] libata updates
  • From: Alan Cox
• Some sata_mv error messages (was: Re: 2.6.16-rc6-mm2)
  • From: Sander
• [git patches] libata updates
  • From: Jeff Garzik
• [PATCH 7/12] [IDE] Set CFLAGS only for au1xxx-ide
  • From: Martin Michlmayr
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Bill Rugolsky Jr.
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: sata_Re: sata_mv success on 2.6.16-rc6-mm2
  • From: Jeff Garzik
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• Re: libata+SGIO: is .dma_boundary respected?
  • From: Jeff Garzik
• Re: sata_Re: sata_mv success on 2.6.16-rc6-mm2
  • From: Mark Lord
• libata+SGIO: is .dma_boundary respected?
  • From: Mark Lord
• [PATCH: kernel 2.6.16-rc6] CMD643 does not support DMA
  • From: Komuro
• Quick patch fixes resume with host protected area
  • From: Arnaud Cornet
• Re: sata_mv success on 2.6.16-rc6-mm2 (was: Re: 2.6.16-rc6-mm2)
  • From: Andrew Morton
• Re: [PATCH] libata: implement minimal transport template for ->eh_timed_out
  • From: Christoph Hellwig
• sata_mv success on 2.6.16-rc6-mm2 (was: Re: 2.6.16-rc6-mm2)
  • From: Sander
• [PATCH] libata: implement minimal transport template for ->eh_timed_out
  • From: Tejun Heo
• Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
  • From: Jeff Garzik
• [PATCH 04/15] libata: ata_scsi_queuecmd cleanup
  • From: Brian King
• [PATCH 09/15] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• [PATCH 08/15] libata: Add host lock to struct ata_port
  • From: Brian King
• [PATCH 05/15] libata: Add __ata_scsi_ioctl
  • From: Brian King
• [PATCH 11/15] ipr: Fixup device type check
  • From: Brian King
• [PATCH 03/15] libata: ata_scsi_slave_config cleanup
  • From: Brian King
• [PATCH 07/15] libata: Remove dependence on host_set->dev for SAS
  • From: Brian King
• [PATCH 13/15] ipr: printk macro cleanup/removal
  • From: Brian King
• [PATCH 12/15] ipr: Simplify status area dumping
  • From: Brian King
• [PATCH 14/15] ipr: Reset device cleanup
  • From: Brian King
• [PATCH 15/15] ipr: Support attaching SATA devices
  • From: Brian King
• [PATCH 10/15] ipr: Disk remove path cleanup
  • From: Brian King
• [PATCH 01/15] libata: Setup nbytes in ata_sg_init_one
  • From: Brian King
• [PATCH 06/15] libata: Stop using host->max_cmd_len
  • From: Brian King
• [PATCH 02/15] libata: Add some dummy noop functions
  • From: Brian King
• [PATCH 0/15] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• Re: LibPATA code issues / 2.6.15.4
  • From: Tejun Heo
• Re: LibPATA code issues / 2.6.15.4
  • From: Eric D. Mudama
• Re: LibPATA code issues / 2.6.15.4
  • From: Mark Lord
• Re: [PATCH] AHCI SATA vendor update from VIA
  • From: Geoff Rivell
• sata_sx4 for sx4060
  • From: www-data
• Re: [PATCH] AHCI SATA vendor update from VIA
  • From: Ph. Marek
• Re: LibPATA code issues / 2.6.15.4
  • From: Jeff Garzik
• Re: LibPATA code issues / 2.6.15.4
  • From: Albert Lee