A lot of EH codes are about to be added to libata. Separate out
libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(),
ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and
ata_eh_qc_retry() are moved. No code is changed by this patch.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/scsi/Makefile | 2
drivers/scsi/libata-core.c | 102 +----------------
drivers/scsi/libata-eh.c | 264 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/libata-scsi.c | 130 ----------------------
drivers/scsi/libata.h | 4 +
include/linux/libata.h | 12 +-
6 files changed, 281 insertions(+), 233 deletions(-)
create mode 100644 drivers/scsi/libata-eh.c
54c87b2c238b530350be7b7d2edaa7b0edcb99fd
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e513c31..503f189 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
-libata-objs := libata-core.o libata-scsi.o libata-bmdma.o
+libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 999fe08..44bdfa6 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4011,99 +4011,6 @@ err_out:
}
/**
- * ata_qc_timeout - Handle timeout of queued command
- * @qc: Command that timed out
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ata_host_set *host_set = ap->host_set;
- u8 host_stat = 0, drv_stat;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- spin_lock_irqsave(&host_set->lock, flags);
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- /* fall through */
-
- default:
- ata_altstatus(ap);
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat, host_stat);
-
- /* complete taskfile transaction */
- qc->err_mask |= ac_err_mask(drv_stat);
- break;
- }
-
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- ata_eh_qc_complete(qc);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eng_timeout - Handle timeout of queued command
- * @ap: Port on which timed-out command is active
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-
-void ata_eng_timeout(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
-
- DPRINTK("EXIT\n");
-}
-
-/**
* ata_qc_new - Request an available ATA command, for queueing
* @ap: Port associated with device @dev
* @dev: Device from whom we request an available command structure
@@ -5140,7 +5047,6 @@ EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_sg_init_one);
EXPORT_SYMBOL_GPL(__ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_tf_load);
EXPORT_SYMBOL_GPL(ata_tf_read);
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
@@ -5180,15 +5086,12 @@ EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
@@ -5210,3 +5113,8 @@ EXPORT_SYMBOL_GPL(ata_device_suspend);
EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+
+EXPORT_SYMBOL_GPL(ata_scsi_error);
+EXPORT_SYMBOL_GPL(ata_eng_timeout);
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
new file mode 100644
index 0000000..e73f561
--- /dev/null
+++ b/drivers/scsi/libata-eh.c
@@ -0,0 +1,264 @@
+/*
+ * libata-eh.c - libata error handling
+ *
+ * Maintained by: Jeff Garzik <jgarzik@xxxxxxxxx>
+ * Please ALWAYS copy linux-ide@xxxxxxxxxxxxxxx
+ * on emails.
+ *
+ * Copyright 2006 Tejun Heo <htejun@xxxxxxxxx>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from http://www.t13.org/ and
+ * http://www.sata-io.org/
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ * ata_scsi_timed_out - SCSI layer time out callback
+ * @cmd: timed out SCSI command
+ *
+ * Handles SCSI layer timeout. We race with normal completion of
+ * the qc for @cmd. If the qc is already gone, we lose and let
+ * the scsi command finish (EH_HANDLED). Otherwise, the qc has
+ * timed out and EH should be invoked. Prevent ata_qc_complete()
+ * from finishing it by setting EH_SCHEDULED and return
+ * EH_NOT_HANDLED.
+ *
+ * LOCKING:
+ * Called from timer context
+ *
+ * RETURNS:
+ * EH_HANDLED or EH_NOT_HANDLED
+ */
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ unsigned long flags;
+ struct ata_queued_cmd *qc;
+ enum scsi_eh_timer_return ret = EH_HANDLED;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ WARN_ON(qc->scsicmd != cmd);
+ qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ret = EH_NOT_HANDLED;
+ }
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT, ret=%d\n", ret);
+ return ret;
+}
+
+/**
+ * ata_scsi_error - SCSI layer error handler callback
+ * @host: SCSI host on which error occurred
+ *
+ * Handles SCSI-layer-thrown error events.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ *
+ * RETURNS:
+ * Zero.
+ */
+int ata_scsi_error(struct Scsi_Host *host)
+{
+ struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
+
+ DPRINTK("ENTER\n");
+
+ /* synchronize with IRQ handler and port task */
+ spin_unlock_wait(&ap->host_set->lock);
+ ata_port_flush_task(ap);
+
+ WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+
+ ap->ops->eng_timeout(ap);
+
+ WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
+
+ scsi_eh_flush_done_q(&ap->eh_done_q);
+
+ DPRINTK("EXIT\n");
+ return 0;
+}
+
+/**
+ * ata_qc_timeout - Handle timeout of queued command
+ * @qc: Command that timed out
+ *
+ * Some part of the kernel (currently, only the SCSI layer)
+ * has noticed that the active command on port @ap has not
+ * completed after a specified length of time. Handle this
+ * condition by disabling DMA (if necessary) and completing
+ * transactions, with error if necessary.
+ *
+ * This also handles the case of the "lost interrupt", where
+ * for some reason (possibly hardware bug, possibly driver bug)
+ * an interrupt was not delivered to the driver, even though the
+ * transaction completed successfully.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ */
+static void ata_qc_timeout(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_host_set *host_set = ap->host_set;
+ u8 host_stat = 0, drv_stat;
+ unsigned long flags;
+
+ DPRINTK("ENTER\n");
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ spin_lock_irqsave(&host_set->lock, flags);
+
+ switch (qc->tf.protocol) {
+
+ case ATA_PROT_DMA:
+ case ATA_PROT_ATAPI_DMA:
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ /* fall through */
+
+ default:
+ ata_altstatus(ap);
+ drv_stat = ata_chk_status(ap);
+
+ /* ack bmdma irq events */
+ ap->ops->irq_clear(ap);
+
+ printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
+ ap->id, qc->tf.command, drv_stat, host_stat);
+
+ /* complete taskfile transaction */
+ qc->err_mask |= ac_err_mask(drv_stat);
+ break;
+ }
+
+ spin_unlock_irqrestore(&host_set->lock, flags);
+
+ ata_eh_qc_complete(qc);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_eng_timeout - Handle timeout of queued command
+ * @ap: Port on which timed-out command is active
+ *
+ * Some part of the kernel (currently, only the SCSI layer)
+ * has noticed that the active command on port @ap has not
+ * completed after a specified length of time. Handle this
+ * condition by disabling DMA (if necessary) and completing
+ * transactions, with error if necessary.
+ *
+ * This also handles the case of the "lost interrupt", where
+ * for some reason (possibly hardware bug, possibly driver bug)
+ * an interrupt was not delivered to the driver, even though the
+ * transaction completed successfully.
+ *
+ * LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
+ */
+void ata_eng_timeout(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
+
+ DPRINTK("EXIT\n");
+}
+
+static void ata_eh_scsidone(struct scsi_cmnd *scmd)
+{
+ /* nada */
+}
+
+static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = ata_eh_scsidone;
+ __ata_qc_complete(qc);
+ WARN_ON(ata_tag_valid(qc->tag));
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+}
+
+/**
+ * ata_eh_qc_complete - Complete an active ATA command from EH
+ * @qc: Command to complete
+ *
+ * Indicate to the mid and upper layers that an ATA command has
+ * completed. To be used from EH.
+ */
+void ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ scmd->retries = scmd->allowed;
+ __ata_eh_qc_complete(qc);
+}
+
+/**
+ * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
+ * @qc: Command to retry
+ *
+ * Indicate to the mid and upper layers that an ATA command
+ * should be retried. To be used from EH.
+ *
+ * SCSI midlayer limits the number of retries to scmd->allowed.
+ * scmd->retries is decremented for commands which get retried
+ * due to unrelated failures (qc->err_mask is zero).
+ */
+void ata_eh_qc_retry(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ if (!qc->err_mask && scmd->retries)
+ scmd->retries--;
+ __ata_eh_qc_complete(qc);
+}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 4400815..745fc26 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -53,7 +53,6 @@
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
#define RW_RECOVERY_MPAGE 0x1
#define RW_RECOVERY_MPAGE_LEN 12
@@ -714,135 +713,6 @@ int ata_scsi_slave_config(struct scsi_de
}
/**
- * ata_scsi_timed_out - SCSI layer time out callback
- * @cmd: timed out SCSI command
- *
- * Handles SCSI layer timeout. We race with normal completion of
- * the qc for @cmd. If the qc is already gone, we lose and let
- * the scsi command finish (EH_HANDLED). Otherwise, the qc has
- * timed out and EH should be invoked. Prevent ata_qc_complete()
- * from finishing it by setting EH_SCHEDULED and return
- * EH_NOT_HANDLED.
- *
- * LOCKING:
- * Called from timer context
- *
- * RETURNS:
- * EH_HANDLED or EH_NOT_HANDLED
- */
-enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *host = cmd->device->host;
- struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
- unsigned long flags;
- struct ata_queued_cmd *qc;
- enum scsi_eh_timer_return ret = EH_HANDLED;
-
- DPRINTK("ENTER\n");
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc) {
- WARN_ON(qc->scsicmd != cmd);
- qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
- qc->err_mask |= AC_ERR_TIMEOUT;
- ret = EH_NOT_HANDLED;
- }
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- DPRINTK("EXIT, ret=%d\n", ret);
- return ret;
-}
-
-/**
- * ata_scsi_error - SCSI layer error handler callback
- * @host: SCSI host on which error occurred
- *
- * Handles SCSI-layer-thrown error events.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- *
- * RETURNS:
- * Zero.
- */
-
-int ata_scsi_error(struct Scsi_Host *host)
-{
- struct ata_port *ap = (struct ata_port *)&host->hostdata[0];
-
- DPRINTK("ENTER\n");
-
- /* synchronize with IRQ handler and port task */
- spin_unlock_wait(&ap->host_set->lock);
- ata_port_flush_task(ap);
-
- WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
-
- ap->ops->eng_timeout(ap);
-
- WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
-
- scsi_eh_flush_done_q(&ap->eh_done_q);
-
- DPRINTK("EXIT\n");
- return 0;
-}
-
-static void ata_eh_scsidone(struct scsi_cmnd *scmd)
-{
- /* nada */
-}
-
-static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scsi_cmnd *scmd = qc->scsicmd;
- unsigned long flags;
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc->scsidone = ata_eh_scsidone;
- __ata_qc_complete(qc);
- WARN_ON(ata_tag_valid(qc->tag));
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
-}
-
-/**
- * ata_eh_qc_complete - Complete an active ATA command from EH
- * @qc: Command to complete
- *
- * Indicate to the mid and upper layers that an ATA command has
- * completed. To be used from EH.
- */
-void ata_eh_qc_complete(struct ata_queued_cmd *qc)
-{
- struct scsi_cmnd *scmd = qc->scsicmd;
- scmd->retries = scmd->allowed;
- __ata_eh_qc_complete(qc);
-}
-
-/**
- * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
- * @qc: Command to retry
- *
- * Indicate to the mid and upper layers that an ATA command
- * should be retried. To be used from EH.
- *
- * SCSI midlayer limits the number of retries to scmd->allowed.
- * scmd->retries is decremented for commands which get retried
- * due to unrelated failures (qc->err_mask is zero).
- */
-void ata_eh_qc_retry(struct ata_queued_cmd *qc)
-{
- struct scsi_cmnd *scmd = qc->scsicmd;
- if (!qc->err_mask && scmd->retries)
- scmd->retries--;
- __ata_eh_qc_complete(qc);
-}
-
-/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 1c755b1..75e9bd5 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -60,7 +60,6 @@ extern int ata_cmd_ioctl(struct scsi_dev
extern struct scsi_transport_template ata_scsi_transport_template;
extern void ata_scsi_scan_host(struct ata_port *ap);
-extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
@@ -90,4 +89,7 @@ extern void ata_scsi_rbuf_fill(struct at
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
+/* libata-eh.c */
+extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
+
#endif /* __LIBATA_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a6d829c..75bdee0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -531,9 +531,6 @@ extern void ata_host_set_remove(struct a
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
-extern int ata_scsi_error(struct Scsi_Host *host);
-extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int ata_scsi_device_resume(struct scsi_device *);
@@ -582,7 +579,6 @@ extern void ata_bmdma_stop(struct ata_qu
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eng_timeout(struct ata_port *ap);
extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
@@ -637,6 +633,14 @@ extern int pci_test_config_bits(struct p
extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long);
#endif /* CONFIG_PCI */
+/*
+ * EH
+ */
+extern int ata_scsi_error(struct Scsi_Host *host);
+extern void ata_eng_timeout(struct ata_port *ap);
+extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+
static inline int
ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
--
1.2.4
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
