Enable 64bit.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/scsi/sata_sil24.c | 47 +++++++++++++++++++++++++++------------------
1 files changed, 28 insertions(+), 19 deletions(-)
709a645787936306deaf99ec7e9a4cdf3629493c
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 40795e6..9320368 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -486,6 +486,7 @@ static int sil24_softreset(struct ata_po
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+ writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
@@ -645,6 +646,8 @@ static unsigned int sil24_qc_issue(struc
dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+ writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
+
return 0;
}
@@ -981,22 +984,29 @@ static int sil24_init_one(struct pci_dev
/*
* Configure the device
*/
- /*
- * FIXME: This device is certainly 64-bit capable. We just
- * don't know how to use it. After fixing 32bit activation in
- * this function, enable 64bit masks here.
- */
- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- goto out_free;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- goto out_free;
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ goto out_free;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ goto out_free;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ goto out_free;
+ }
}
/* GPIO off */
@@ -1054,9 +1064,8 @@ static int sil24_init_one(struct pci_dev
writel(0x0000, port + PORT_CRC_ERR_CNT);
writel(0x0000, port + PORT_HSHK_ERR_CNT);
- /* FIXME: 32bit activation? */
- writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
- writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
+ /* Always use 64bit activation */
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
/* Configure interrupts */
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
--
1.2.4
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
