Make ata_drive_probe_reset() use SATA SPD configuration. Hardreset
will be force if speed renegotiation is necessary. Also, if a
hardreset fails, PHY speed is stepped down and hardreset is retried
until the lowest speed is reached.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/scsi/libata-core.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)
c927e2f9d4688d9d34e7d1d5f7f2e34e86e93827
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 16095d8..30ee203 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2629,7 +2629,7 @@ int ata_drive_probe_reset(struct ata_por
if (probeinit)
probeinit(ap);
- if (softreset) {
+ if (softreset && !ata_set_sata_spd_needed(ap, &ap->device[0])) {
rc = ata_do_reset(ap, softreset, postreset, 0, classes);
if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
goto done;
@@ -2638,9 +2638,18 @@ int ata_drive_probe_reset(struct ata_por
if (!hardreset)
goto done;
- rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
- if (rc || classes[0] != ATA_DEV_UNKNOWN)
- goto done;
+ while (1) {
+ ata_set_sata_spd(ap, &ap->device[0]);
+ rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
+ if (rc == 0) {
+ if (classes[0] != ATA_DEV_UNKNOWN)
+ goto done;
+ break;
+ }
+
+ if (ata_down_sata_spd_limit(ap, &ap->device[0]))
+ goto done;
+ }
if (softreset)
rc = ata_do_reset(ap, softreset, postreset, 0, classes);
--
1.2.4
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
