Linux Kernel I²C Bus Layer

• Date Index

• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper, (continued)
  • Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper, Andy Shevchenko
  • Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper, Hans de Goede
    • Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper, Hans de Goede
• [PATCH v2 1/8] PCI: Introduce pci_bus_*() printing macros when device is not available, Andy Shevchenko
  • [PATCH v2 4/8] pinctrl: intel: Check against matching data instead of ACPI companion, Andy Shevchenko
  • [PATCH v2 8/8] i2c: i801: convert to use common P2SB accessor, Andy Shevchenko
  • [PATCH v2 6/8] mfd: lpc_ich: Switch to generic p2sb_bar(), Andy Shevchenko
  • [PATCH v2 5/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write(), Andy Shevchenko
  • [PATCH v2 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support, Andy Shevchenko
  • [PATCH v2 2/8] PCI: Convert __pci_read_base() to __pci_bus_read_base(), Andy Shevchenko
  • [PATCH v2 7/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system, Andy Shevchenko
  • Re: [PATCH v2 1/8] PCI: Introduce pci_bus_*() printing macros when device is not available, Andy Shevchenko
• [PATCH v2 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's, Lad Prabhakar
  • [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Lad Prabhakar
    • Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Florian Fainelli
    • Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Wolfram Sang
  • [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad Prabhakar
    • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Geert Uytterhoeven
    • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Wolfram Sang
    • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Andy Shevchenko
      • RE: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Prabhakar Mahadev Lad
        • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Andy Shevchenko
          • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad, Prabhakar
    • Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Wolfram Sang
  • [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Lad Prabhakar
    • Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Wolfram Sang
    • Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Geert Uytterhoeven
    • Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Wolfram Sang
• [RFC Patch v3 0/3] I2C statistics as sysfs attributes, Sui Chen
  • [RFC Patch v3 1/3] i2c debug counters as sysfs attributes, Sui Chen
    • Re: [RFC Patch v3 1/3] i2c debug counters as sysfs attributes, Wolfram Sang
  • [RFC Patch v3 2/3] i2c: npcm7xx: add tx_complete counter, Sui Chen
  • [RFC Patch v3 3/3] add npcm7xx debug counters as sysfs attributes, Sui Chen
• [PATCH] CHROMIUM: i2c: Add device property for probing, Paul Menzel
  • Re: [PATCH] CHROMIUM: i2c: Add device property for probing, Dmitry Torokhov
    • Re: [PATCH] CHROMIUM: i2c: Add device property for probing, Guenter Roeck
      • Re: [PATCH] CHROMIUM: i2c: Add device property for probing, Paul Menzel
        • Re: [PATCH] CHROMIUM: i2c: Add device property for probing, Guenter Roeck
        • Re: [PATCH] CHROMIUM: i2c: Add device property for probing, Dmitry Torokhov
• [PATCH] i2c-detect: fix a typo argment -> argument, Aurelien Jarno
  • Re: [PATCH] i2c-detect: fix a typo argment -> argument, Wolfram Sang
• [PATCH 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's, Lad Prabhakar
  • [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Lad Prabhakar
    • Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Florian Fainelli
      • Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Lad, Prabhakar
        • Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Lad, Prabhakar
          • Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt, Florian Fainelli
  • [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad Prabhakar
    • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Wolfram Sang
      • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad, Prabhakar
    • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Geert Uytterhoeven
      • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Sergei Shtylyov
        • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Arnd Bergmann
          • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Sergei Shtylyov
            • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Arnd Bergmann
              • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Sergei Shtylyov
                • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Arnd Bergmann
                  • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Sergei Shtylyov
                    • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Arnd Bergmann
                    • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Geert Uytterhoeven
                • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Geert Uytterhoeven
                  • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Sergei Shtylyov
      • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad, Prabhakar
        • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Geert Uytterhoeven
          • Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt, Lad, Prabhakar
  • [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Lad Prabhakar
    • Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Wolfram Sang
    • Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt, Geert Uytterhoeven
• [PATCH v2 1/4] dt-bindings: i2c: tegra: Convert to json-schema, Thierry Reding
  • [PATCH 2/4] dt-bindings: i2c: i2c-mux-pinctrl: Convert to json-schema, Thierry Reding
    • Re: [PATCH 2/4] dt-bindings: i2c: i2c-mux-pinctrl: Convert to json-schema, Rob Herring
  • [PATCH 4/4] dt-bindings: i2c: i2c-mux-gpio: Convert to json-schema, Thierry Reding
    • Re: [PATCH 4/4] dt-bindings: i2c: i2c-mux-gpio: Convert to json-schema, Rob Herring
  • [PATCH 3/4] dt-bindings: i2c: aspeed: Document interrupt controller properties, Thierry Reding
    • Re: [PATCH 3/4] dt-bindings: i2c: aspeed: Document interrupt controller properties, Rob Herring
  • Re: [PATCH v2 1/4] dt-bindings: i2c: tegra: Convert to json-schema, Rob Herring
• [PATCH v2 00/17] Update the Icicle Kit device tree, conor.dooley
  • [PATCH v2 01/17] dt-bindings: interrupt-controller: create a header for RISC-V interrupts, conor.dooley
    • Re: [PATCH v2 01/17] dt-bindings: interrupt-controller: create a header for RISC-V interrupts, Rob Herring
  • [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles, conor.dooley
    • Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles, Geert Uytterhoeven
    • Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles, Rob Herring
  • [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd, conor.dooley
    • Re: [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd, Rob Herring
      • Re: [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd, conor dooley
  • [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string, conor.dooley
    • Re: [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string, Geert Uytterhoeven
  • [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, conor.dooley
    • Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, Krzysztof Kozlowski
      • Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, Krzysztof Kozlowski
        • Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, Conor.Dooley
          • Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, Krzysztof Kozlowski
            • Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng, conor dooley
  • [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c, conor.dooley
    • Re: [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c, Rob Herring
  • [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc, conor.dooley
    • Re: [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc, Rob Herring
    • Re: [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc, Rob Herring
  • [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio, conor.dooley
    • Re: [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio, Rob Herring
  • [PATCH v2 08/17] dt-bindings: soc/microchip: add bindings for mpfs system services, conor.dooley
  • [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, conor.dooley
    • Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, Mark Brown
      • Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, Conor.Dooley
        • Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, Mark Brown
          • Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, Conor.Dooley
    • Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi, Rob Herring
  • [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb, conor.dooley
    • Re: [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb, Rob Herring
    • Re: [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb, Rob Herring
  • [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding, conor.dooley
    • Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding, Rob Herring
    • Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding, Krzysztof Kozlowski
  • [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit, conor.dooley
    • Re: [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit, Geert Uytterhoeven
  • [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, conor.dooley
    • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Geert Uytterhoeven
      • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Conor.Dooley
        • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Geert Uytterhoeven
          • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Conor.Dooley
      • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Conor.Dooley
    • Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit, Krzysztof Kozlowski
  • [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree, conor.dooley
    • Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree, Krzysztof Kozlowski
      • Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree, Conor.Dooley
  • [PATCH v2 16/17] riscv: dts: microchip: update peripherals in icicle kit device tree, conor.dooley
  • [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry, conor.dooley
    • Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry, Krzysztof Kozlowski
      • Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry, Conor.Dooley
        • Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry, Palmer Dabbelt
        • RE: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry, Lewis.Hanly
  • Re: [PATCH v2 00/17] Update the Icicle Kit device tree, Geert Uytterhoeven
• [RESEND v4 00/10] arm64: dts: Add i.MX8DXL initial support, Abel Vesa
  • [RESEND v4 01/10] dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching, Abel Vesa
  • [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl, Abel Vesa
    • Re: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl, Shawn Guo
      • Re: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl, Abel Vesa
  • [RESEND v4 03/10] arm64: dts: imx8-ss-lsio: Add mu5a mailbox, Abel Vesa
  • [RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl, Abel Vesa
    • Re: [RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl, Shawn Guo
  • [RESEND v4 07/10] arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl, Abel Vesa
  • [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support, Abel Vesa
    • Re: [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support, Shawn Guo
      • Re: [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support, Abel Vesa
  • [RESEND v4 09/10] dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding, Abel Vesa
  • [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible, Abel Vesa
    • Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible, Greg Kroah-Hartman
      • Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible, Abel Vesa
        • Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible, Greg Kroah-Hartman
  • [RESEND v4 06/10] arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl, Abel Vesa
  • [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi, Abel Vesa
    • Re: [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi, Shawn Guo
      • Re: [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi, Abel Vesa
• [PATCH 0/2] Enable named interrupt smbus-alert for ACPI as well, Akhil R
  • [PATCH 1/2] device property: Add device_irq_get_byname, Akhil R
    • Re: [PATCH 1/2] device property: Add device_irq_get_byname, Andy Shevchenko
      • RE: [PATCH 1/2] device property: Add device_irq_get_byname, Akhil R
  • [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_, Akhil R
    • Re: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_, Andy Shevchenko
      • RE: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_, Akhil R
        • Re: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_, Andy Shevchenko
          • RE: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_, Akhil R
• [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Jarkko Nikula
  • [PATCH 2/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Jarkko Nikula
    • Re: [PATCH 2/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Wolfram Sang
  • [PATCH 3/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage, Jarkko Nikula
    • Re: [PATCH 3/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage, Wolfram Sang
  • [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros, Jarkko Nikula
    • Re: [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros, Wolfram Sang
      • Re: [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros, Andy Shevchenko
  • [PATCH 5/6] i2c: designware-pci: use __maybe_unused for PM functions, Jarkko Nikula
    • Re: [PATCH 5/6] i2c: designware-pci: use __maybe_unused for PM functions, Wolfram Sang
  • [PATCH 6/6] i2c: designware-pci: Convert to use dev_err_probe(), Jarkko Nikula
    • Re: [PATCH 6/6] i2c: designware-pci: Convert to use dev_err_probe(), Wolfram Sang
  • Re: [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Wolfram Sang
• [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs, Bruce Duncan
  • Re: [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs, Wolfram Sang
    • Re: [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs, Jean Delvare
      • Re: [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs, Bruce Duncan
• [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt, tamal . saha
  • Re: [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Jarkko Nikula
• [PATCH 1/4] dt-bindings: i2c Update PCA954x, Patrick Rudolph
  • [PATCH 2/4] drivers/i2c/mux: Add MAX735x support to PCA954x, Patrick Rudolph
  • [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x, Patrick Rudolph
    • Re: [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x, Laurent Pinchart
  • [PATCH 4/4] i2c-mux-pca954x: Add regulator support, Patrick Rudolph
    • Re: [PATCH 4/4] i2c-mux-pca954x: Add regulator support, kernel test robot
  • Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x, Laurent Pinchart
    • Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x, Peter Rosin
      • Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x, Patrick Rudolph
        • Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x, Laurent Pinchart
  • Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x, Rob Herring
• [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt, tamal . saha
  • Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Andy Shevchenko
    • Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Andy Shevchenko
      • RE: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Saha, Tamal
• [PATCH] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Heiner Kallweit
• [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device, Andy Shevchenko
  • [PATCH v2 3/6] i2c: designware-pci: use __maybe_unused for PM functions, Andy Shevchenko
  • [PATCH v2 2/6] i2c: designware-pci: Convert to use dev_err_probe(), Andy Shevchenko
  • [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Andy Shevchenko
    • Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Jarkko Nikula
      • Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Andy Shevchenko
        • Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Jarkko Nikula
  • [PATCH v2 6/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage, Andy Shevchenko
  • [PATCH v2 5/6] i2c: designware-pci: Group MODULE_*() macros, Andy Shevchenko
  • Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device, Jarkko Nikula
    • Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device, Andy Shevchenko
      • Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device, Jarkko Nikula
  • Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device, Andy Shevchenko
• [PATCH] i2c: exynos5: Fix getting the optional clock, Sam Protsenko
  • Re: [PATCH] i2c: exynos5: Fix getting the optional clock, Krzysztof Kozlowski
  • RE: [PATCH] i2c: exynos5: Fix getting the optional clock, Chanho Park
  • Re: [PATCH] i2c: exynos5: Fix getting the optional clock, Wolfram Sang
    • Re: [PATCH] i2c: exynos5: Fix getting the optional clock, Sam Protsenko
• Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendik
  • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
    • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Wolfram Sang
      • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
    • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Andrea Ippolito
      • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
  • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Wolfram Sang
  • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
    • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Wolfram Sang
  • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
    • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Mario Limonciello
      • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
        • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Hans de Goede
          • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Shyam Sundar S K
            • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Miroslav Bendík
              • Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD), Shyam Sundar S K
• [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt, tamal . saha
  • Re: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Andy Shevchenko
    • RE: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt, Saha, Tamal
• [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support., Maxim Kochetkov
  • [PATCH v3 1/2] eeprom: at24: Add support for 24c1025 EEPROM, Maxim Kochetkov
  • [PATCH v3 2/2] dt-bindings: at24: add at24c1025, Maxim Kochetkov
  • Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support., Bartosz Golaszewski
    • Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support., Maxim Kochetkov
• [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq, Akhil R
  • Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq, Dmitry Osipenko
    • Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq, Andy Shevchenko
      • Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq, Dmitry Osipenko
  • Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq, Wolfram Sang
• [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts, lizhe
  • Re: [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts, Ahmad Fatoum
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend, wsa@xxxxxxxxxx
  • Message not available
    • Message not available
      • Message not available
        • Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend, wsa@xxxxxxxxxx
  • <Possible follow-ups>
  • Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend, Thorsten Leemhuis
• [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq, Akhil R
  • Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq, Dmitry Osipenko
    • RE: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq, Akhil R
      • Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq, Andy Shevchenko
• [PATCH 0/2] Add SMBus features to Tegra I2C, Akhil R
  • [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties, Akhil R
    • Re: [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties, Andy Shevchenko
    • Re: [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties, Rob Herring
  • [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Akhil R
    • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
      • RE: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Akhil R
        • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
        • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
    • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
      • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Andy Shevchenko
        • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
    • Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions, Dmitry Osipenko
  • Re: [PATCH 0/2] Add SMBus features to Tegra I2C, Dmitry Osipenko
    • Re: [PATCH 0/2] Add SMBus features to Tegra I2C, Thierry Reding
      • Re: [PATCH 0/2] Add SMBus features to Tegra I2C, Rob Herring
• [PATCH v3] i2c: exynos5: Add bus clock support, Sam Protsenko
  • Re: [PATCH v3] i2c: exynos5: Add bus clock support, Wolfram Sang
• [PATCH] i2c: tegra: use i2c_timings for bus clock freq, Akhil R
  • Re: [PATCH] i2c: tegra: use i2c_timings for bus clock freq, Andy Shevchenko
• [PATCH] dt-bindings: at24: Rework special case compatible handling, Geert Uytterhoeven
  • Re: [PATCH] dt-bindings: at24: Rework special case compatible handling, Bartosz Golaszewski
• [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating, Wolfram Sang
  • [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating, Wolfram Sang
    • Re: [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating, Wolfram Sang
  • Re: [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating, Wolfram Sang
• [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI, Andy Shevchenko
  • [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device, Andy Shevchenko
    • Re: [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device, Jarkko Nikula
  • [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe(), Andy Shevchenko
    • Re: [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe(), Jarkko Nikula
  • [PATCH v1 10/11] i2c: nvidia-gpu: Use temporary variable for struct device, Andy Shevchenko
  • [PATCH v1 11/11] i2c: nvidia-gpu: Convert to use dev_err_probe(), Andy Shevchenko
  • [PATCH v1 09/11] i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi(), Andy Shevchenko
  • [PATCH v1 02/11] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi(), Andy Shevchenko
  • [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions, Andy Shevchenko
    • Re: [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions, Jarkko Nikula
  • [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Andy Shevchenko
    • Re: [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters, Jarkko Nikula
  • [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros, Andy Shevchenko
    • Re: [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros, Jarkko Nikula
  • [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage, Andy Shevchenko
    • Re: [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage, Jarkko Nikula
  • Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI, Jarkko Nikula
    • Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI, Andy Shevchenko
      • Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI, Shah, Nehal-bakulchandra
• [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device, Andy Shevchenko
  • Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device, Wolfram Sang
    • Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device, Andy Shevchenko
• [PATCH] i2c: aspeed: Remove unused includes, Thierry Reding
  • Re: [PATCH] i2c: aspeed: Remove unused includes, Joel Stanley
  • Re: [PATCH] i2c: aspeed: Remove unused includes, Wolfram Sang
• [PATCH] i2c: mpc: Use atomic read and fix break condition, Chris Packham
  • Re: [PATCH] i2c: mpc: Use atomic read and fix break condition, Maxime Bizon
    • Re: [PATCH] i2c: mpc: Use atomic read and fix break condition, Chris Packham
      • Re: [PATCH] i2c: mpc: Use atomic read and fix break condition, wsa@xxxxxxxxxx
        • Re: [PATCH] i2c: mpc: Use atomic read and fix break condition, Chris Packham
• [PATCH AUTOSEL 4.9 3/5] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH AUTOSEL 4.4 2/3] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH AUTOSEL 4.14 4/6] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH AUTOSEL 4.19 5/7] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4, Heiner Kallweit
  • Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4, Heiner Kallweit
  • Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4, Wolfram Sang
    • Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4, Heiner Kallweit
• [PATCH AUTOSEL 5.4 06/10] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH AUTOSEL 5.10 11/15] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH AUTOSEL 5.15 15/24] i2c: rk3x: Handle a spurious start completion interrupt flag, Sasha Levin
• [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema, David Heidelberg
  • Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema, Florian Fainelli
    • Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema, David Heidelberg
  • Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema, Wolfram Sang
• [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells', Rob Herring
  • Re: [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells', Thierry Reding
  • Re: [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells', Wolfram Sang
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module', Sven Peter
  • Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module', Arnd Bergmann
    • Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module', Sven Peter
• [PATCH] i2c: Fix syntax errors in comments, Xiang wangx
  • Re: [PATCH] i2c: Fix syntax errors in comments, Wolfram Sang
• [PATCH] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER, Heiner Kallweit
• [PATCH] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ, Heiner Kallweit
• [PATCH] i2c: i801: improve interrupt handler, Heiner Kallweit
• [PATCH v2 RESEND 0/8] i2c: exynos5: Add support for modern Exynos SoCs, Sam Protsenko
  • [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema, Sam Protsenko
    • Re: [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema, Wolfram Sang
  • [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Sam Protsenko
    • Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Rob Herring
    • Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Wolfram Sang
  • [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support, Sam Protsenko
    • Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support, Wolfram Sang
      • Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support, Sam Protsenko
  • [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Sam Protsenko
    • Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Sam Protsenko
      • Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Wolfram Sang
    • Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Wolfram Sang
  • [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Sam Protsenko
    • Re: (subset) [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Krzysztof Kozlowski
    • Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Wolfram Sang
      • Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Sam Protsenko
      • Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Krzysztof Kozlowski
        • Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Wolfram Sang
  • [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC, Sam Protsenko
    • Re: [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC, Wolfram Sang
  • [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7, Sam Protsenko
    • Re: (subset) [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7, Krzysztof Kozlowski
  • [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock, Sam Protsenko
    • Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock, Krzysztof Kozlowski
    • Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock, Wolfram Sang
• From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001, Sam Protsenko
  • [PATCH v2 1/8] dt-bindings: i2c: exynos5: Convert to dtschema, Sam Protsenko
  • [PATCH v2 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Sam Protsenko
  • [PATCH v2 3/8] dt-bindings: i2c: exynos5: Add bus clock, Sam Protsenko
  • [PATCH v2 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC, Sam Protsenko
  • [PATCH v2 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Sam Protsenko
  • [PATCH v2 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7, Sam Protsenko
  • [PATCH v2 5/8] i2c: exynos5: Add bus clock support, Sam Protsenko
  • [PATCH v2 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260, Sam Protsenko
  • Re: From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001, Sam Protsenko
• [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode, Heiner Kallweit
  • Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode, Jean Delvare
  • Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode, Wolfram Sang
• [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM, Maxim Kochetkov
  • Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM, Maxim Kochetkov
  • Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM, Bartosz Golaszewski
• [PATCH v2] i2c: i801: Don't clear status flags twice in interrupt mode, Heiner Kallweit
• [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage, Andy Shevchenko
  • Re: [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage, Andy Shevchenko
• [RFC Patch v2 0/3] I2C statistics as sysfs attributes, Sui Chen
  • [RFC Patch v2 1/3] i2c debug counters as sysfs attributes, Sui Chen
    • Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes, Joe Perches
      • Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes, Sui Chen
    • Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes, Joe Perches
  • [RFC Patch v2 2/3] i2c: npcm7xx: add tx_complete counter, Sui Chen
  • [RFC Patch v2 3/3] add npcm7xx debug counters as sysfs attributes, Sui Chen
  • Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes, Wolfram Sang
    • Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes, Sui Chen
      • Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes, Wolfram Sang
• pca954x devices sharing reset-gpios, Chris Packham
• [PATCH v3] i2c: virtio: fix completion handling, Vincent Whitchurch
  • Re: [PATCH v3] i2c: virtio: fix completion handling, Viresh Kumar
  • Re: [PATCH v3] i2c: virtio: fix completion handling, Michael S. Tsirkin
    • Re: [PATCH v3] i2c: virtio: fix completion handling, Wolfram Sang
  • Re: [PATCH v3] i2c: virtio: fix completion handling, Wolfram Sang
• [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode, Heiner Kallweit
  • Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode, Jean Delvare
    • Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode, Heiner Kallweit
• [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Heiner Kallweit
  • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Jean Delvare
    • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Heiner Kallweit
      • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Heiner Kallweit
      • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Jean Delvare
        • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Wolfram Sang
          • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Jean Delvare
  • Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre(), Wolfram Sang
• [PATCH 0/6] i2c: exynos5: Add support for modern Exynos SoCs, Sam Protsenko
  • [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema, Sam Protsenko
    • Re: [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema, Krzysztof Kozlowski
  • [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Sam Protsenko
    • Re: [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible, Krzysztof Kozlowski
  • [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock, Sam Protsenko
    • Re: [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock, Krzysztof Kozlowski
  • [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Sam Protsenko
    • Re: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Krzysztof Kozlowski
    • RE: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig, Chanho Park
  • [PATCH 5/6] i2c: exynos5: Add bus clock support, Sam Protsenko
    • Re: [PATCH 5/6] i2c: exynos5: Add bus clock support, Krzysztof Kozlowski
    • RE: [PATCH 5/6] i2c: exynos5: Add bus clock support, Chanho Park
  • [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC, Sam Protsenko
    • Re: [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC, Krzysztof Kozlowski
• [PATCH 0/2] i2c: stm32: A few cleanups, Alain Volmat
  • [PATCH 1/2] i2c: stm32: get rid of stm32f7_i2c_release_bus return value, Alain Volmat
  • [PATCH v2 2/2] i2c: stm32f7: remove noisy and imprecise log messages, Alain Volmat
  • <Possible follow-ups>
  • Re: [PATCH 0/2] i2c: stm32: A few cleanups, Alain Volmat
• [PATCH AUTOSEL 4.14 07/14] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Sasha Levin
• [PATCH AUTOSEL 4.19 10/17] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Sasha Levin
• [PATCH AUTOSEL 5.4 12/25] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Sasha Levin
• [PATCH AUTOSEL 5.10 23/43] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Sasha Levin
• [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Sasha Levin
  • Re: [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Jean Delvare
• [PATCH AUTOSEL 5.15 23/68] HID: ft260: fix i2c probing for hwmon devices, Sasha Levin
• [PATCH] i2c: stm32f7: remove noisy and imprecise log messages, Wolfram Sang
  • Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages, Alain Volmat
    • Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages, Wolfram Sang
      • Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages, Alain Volmat
        • Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages, Wolfram Sang
• [PATCH v2] i2c: cadence: Add standard bus recovery support, Shubhrajyoti Datta
  • Re: [PATCH v2] i2c: cadence: Add standard bus recovery support, Wolfram Sang
    • Re: [PATCH v2] i2c: cadence: Add standard bus recovery support, Robert Hancock
      • RE: [PATCH v2] i2c: cadence: Add standard bus recovery support, Shubhrajyoti Datta
        • RE: [PATCH v2] i2c: cadence: Add standard bus recovery support, Shubhrajyoti Datta
  • <Possible follow-ups>
  • [PATCH v2] i2c: cadence: Add standard bus recovery support, Shubhrajyoti Datta
    • Re: [PATCH v2] i2c: cadence: Add standard bus recovery support, Michal Simek
    • Re: [PATCH v2] i2c: cadence: Add standard bus recovery support, Wolfram Sang
      • Re: [PATCH v2] i2c: cadence: Add standard bus recovery support, Robert Hancock
        • RE: [PATCH v2] i2c: cadence: Add standard bus recovery support, Datta, Shubhrajyoti
• [PATCH] eeprom: at24: remove struct at24_client, Heiner Kallweit
  • Re: [PATCH] eeprom: at24: remove struct at24_client, Bartosz Golaszewski
• [PATCH 0/8] soc: samsung: Add USIv2 driver, Sam Protsenko
  • [PATCH 1/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings, Sam Protsenko
  • [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc, Sam Protsenko
    • Re: [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc, Krzysztof Kozlowski
  • [PATCH 3/8] soc: samsung: Add USIv2 driver, Sam Protsenko
    • Re: [PATCH 3/8] soc: samsung: Add USIv2 driver, Krzysztof Kozlowski
  • [PATCH 4/8] tty: serial: samsung: Remove USI initialization, Sam Protsenko
    • Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization, Greg Kroah-Hartman
      • Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization, Sam Protsenko
        • Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization, Sam Protsenko
  • [PATCH 5/8] tty: serial: samsung: Enable console as module, Sam Protsenko
    • Re: [PATCH 5/8] tty: serial: samsung: Enable console as module, Krzysztof Kozlowski
      • Re: [PATCH 5/8] tty: serial: samsung: Enable console as module, Sam Protsenko
        • Re: [PATCH 5/8] tty: serial: samsung: Enable console as module, Sam Protsenko
  • [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
    • Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m, Greg Kroah-Hartman
      • Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
  • [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
    • Re: [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
  • [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
    • Re: [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m, Sam Protsenko
  • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, David Virag
    • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, Krzysztof Kozlowski
    • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, Sam Protsenko
      • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, Krzysztof Kozlowski
      • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, David Virag
        • Re: [PATCH 0/8] soc: samsung: Add USIv2 driver, Sam Protsenko
• [PATCH] i2c: cbus-gpio: set atomic transfer callback, Aaro Koskinen
  • Re: [PATCH] i2c: cbus-gpio: set atomic transfer callback, Wolfram Sang
• [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP, Peng Fan (OSS)
  • [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk, Peng Fan (OSS)
    • Re: [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk, Shawn Guo
  • [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string, Peng Fan (OSS)
    • Re: [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string, Wolfram Sang
  • [PATCH V6 2/7] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Peng Fan (OSS)
    • Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Shawn Guo
      • RE: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Peng Fan
        • Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Shawn Guo
    • Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Shawn Guo
  • [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string, Peng Fan (OSS)
    • Re: [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string, Daniel Lezcano
  • [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board, Peng Fan (OSS)
    • Re: [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board, Shawn Guo
  • [PATCH V6 4/7] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string, Peng Fan (OSS)
• [RFC] sti: Conflict in node name for an IP supporting both I2C and SPI, Alain Volmat
  • Re: [RFC] sti: Conflict in node name for an IP supporting both I2C and SPI, Andrew Lunn
• [PATCH v6 00/15] Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data, Hans de Goede
  • [PATCH v6 01/15] ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device, Hans de Goede
  • [PATCH v6 02/15] i2c: acpi: Use acpi_dev_ready_for_enumeration() helper, Hans de Goede
    • Re: [PATCH v6 02/15] i2c: acpi: Use acpi_dev_ready_for_enumeration() helper, Mika Westerberg
  • [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function, Hans de Goede
    • Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function, Andy Shevchenko
      • Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function, Hans de Goede
    • Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function, Mika Westerberg
    • Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function, Wolfram Sang
  • [PATCH v6 04/15] platform_data: Add linux/platform_data/tps68470.h file, Hans de Goede
  • [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Hans de Goede
    • Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Laurent Pinchart
      • Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Hans de Goede
        • Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Laurent Pinchart
          • Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Mark Brown
            • Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver, Laurent Pinchart
  • [PATCH v6 06/15] clk: Introduce clk-tps68470 driver, Hans de Goede
  • [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Hans de Goede
    • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Laurent Pinchart
      • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Hans de Goede
        • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Daniel Scally
          • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Hans de Goede
            • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Daniel Scally
            • Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain, Hans de Goede
  • [PATCH v6 09/15] platform/x86: int3472: Add get_sensor_adev_and_name() helper, Hans de Goede
  • [PATCH v6 10/15] platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell, Hans de Goede
  • [PATCH v6 11/15] platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell, Hans de Goede
  • [PATCH v6 12/15] platform/x86: int3472: Deal with probe ordering issues, Hans de Goede
  • [PATCH v6 13/15] media: ipu3-cio2: Defer probing until the PMIC is fully setup, Hans de Goede
  • [PATCH v6 14/15] media: ipu3-cio2: Call cio2_bridge_init() before anything else, Hans de Goede
  • [PATCH v6 15/15] media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs, Hans de Goede
  • [PATCH v6 08/15] platform/x86: int3472: Split into 2 drivers, Hans de Goede
• [PATCH v4] i2c: tegra: Add the ACPI support, Akhil R
  • Re: [PATCH v4] i2c: tegra: Add the ACPI support, Andy Shevchenko
    • Re: [PATCH v4] i2c: tegra: Add the ACPI support, Dmitry Osipenko
  • Re: [PATCH v4] i2c: tegra: Add the ACPI support, Dmitry Osipenko
  • Re: [PATCH v4] i2c: tegra: Add the ACPI support, Wolfram Sang
• [PATCH v3] i2c: tegra: Add the ACPI support, Akhil R
  • Re: [PATCH v3] i2c: tegra: Add the ACPI support, Dmitry Osipenko
• [PATCH v2 0/3] Apple Arm patform device tree and bindings fixes, Janne Grunau
  • [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Janne Grunau
    • Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Mark Kettenis
    • Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Wolfram Sang
    • Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Rob Herring
  • Re: [PATCH v2 0/3] Apple Arm patform device tree and bindings fixes, Hector Martin
• [PATCH 0/3] Apple Arm patform device tree and bindings fixes, Janne Grunau
  • [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Janne Grunau
    • Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Sven Peter
      • Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Janne Grunau
        • Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles, Sven Peter
• [PATCH v2 1/2] arm64: defconfig: Enable Samsung I2C driver, Sam Protsenko
  • [PATCH v2 2/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies, Sam Protsenko
    • Re: [PATCH v2 2/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies, Wolfram Sang
  • Re: [PATCH v2 1/2] arm64: defconfig: Enable Samsung I2C driver, Krzysztof Kozlowski
• [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP, Peng Fan (OSS)
  • [PATCH V5 1/8] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V5 2/8] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V5 3/8] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V5 4/8] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V5 5/8] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string, Peng Fan (OSS)
  • [PATCH V5 6/8] dt-bindings: arm: fsl: Add binding for imx8ulp evk, Peng Fan (OSS)
  • [PATCH V5 7/8] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp, Peng Fan (OSS)
  • [PATCH V5 8/8] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board, Peng Fan (OSS)
  • Re: (subset) [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP, Mark Brown
  • RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP, Peng Fan
    • RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP, Peng Fan
      • Re: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP, Wolfram Sang
• [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions, Heiner Kallweit
  • Re: [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions, Jean Delvare
  • Re: [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions, Wolfram Sang
• [PATCH] i2c: tegra: Add ACPI support, Akhil R
  • Re: [PATCH] i2c: tegra: Add ACPI support, Andy Shevchenko
    • RE: [PATCH] i2c: tegra: Add ACPI support, Akhil R
    • Re: [PATCH] i2c: tegra: Add ACPI support, Dmitry Osipenko
  • Re: [PATCH] i2c: tegra: Add ACPI support, Dmitry Osipenko
  • [PATCH v2] i2c: tegra: Add ACPI support, Akhil R
    • Re: [PATCH v2] i2c: tegra: Add ACPI support, kernel test robot
    • Re: [PATCH v2] i2c: tegra: Add ACPI support, Dmitry Osipenko
      • RE: [PATCH v2] i2c: tegra: Add ACPI support, Akhil R
        • Re: [PATCH v2] i2c: tegra: Add ACPI support, Dmitry Osipenko
          • RE: [PATCH v2] i2c: tegra: Add ACPI support, Akhil R
            • Re: [PATCH v2] i2c: tegra: Add ACPI support, Dmitry Osipenko
    • Re: [PATCH v2] i2c: tegra: Add ACPI support, kernel test robot
• [PATCH v2] Docs: Fixes link to I2C specification, Deep Majumder
  • Re: [PATCH v2] Docs: Fixes link to I2C specification, Randy Dunlap
    • Re: [PATCH v2] Docs: Fixes link to I2C specification, Deep Majumder
      • Re: [PATCH v2] Docs: Fixes link to I2C specification, Randy Dunlap
  • Re: [PATCH v2] Docs: Fixes link to I2C specification, Wolfram Sang
  • Re: [PATCH v2] Docs: Fixes link to I2C specification, Wolfram Sang
• [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode, Heiner Kallweit
  • Re: [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode, Jean Delvare
  • Re: [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode, Wolfram Sang
• [PATCH RESUBMIT] i2c: cadence: Add standard bus recovery support, Robert Hancock
• [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Jarkko Nikula
  • Re: [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Jean Delvare
  • Re: [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal, Wolfram Sang
• [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Shreeya Patel
  • Re: [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Gabriel Krisman Bertazi
    • Re: [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Bartosz Golaszewski
      • Re: [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Gabriel Krisman Bertazi
        • Re: [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Shreeya Patel
• [PATCH v3] gpio: Return EPROBE_DEFER if gc->to_irq is NULL, Shreeya Patel
• [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Andy Shevchenko
  • [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper, Andy Shevchenko
    • Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper, Evan Green
    • Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper, Peter Rosin
    • Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper, Wolfram Sang
  • [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device, Andy Shevchenko
    • Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device, Evan Green
    • Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device, Peter Rosin
    • Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device, Wolfram Sang
  • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Evan Green
  • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Peter Rosin
    • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Andy Shevchenko
      • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Peter Rosin
        • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Wolfram Sang
  • Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address(), Wolfram Sang
• [syzbot] WARNING in __i2c_transfer (2), syzbot
  • Re: [syzbot] WARNING in __i2c_transfer (2), syzbot
  • Re: [syzbot] WARNING in __i2c_transfer (2), syzbot
  • Re: [syzbot] WARNING in __i2c_transfer (2), Pavel Skripkin
    • Re: [syzbot] WARNING in __i2c_transfer (2), syzbot
• [PATCH] docs: i2c: smbus-protocol: mention the repeated start condition, Miquel Raynal
  • Re: [PATCH] docs: i2c: smbus-protocol: mention the repeated start condition, Wolfram Sang
• [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Lawrence,Wang
  • Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Andy Shevchenko
    • Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Andy Shevchenko
      • RE: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Wang, Lawrence (NSB - CN/Hangzhou)
        • Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Andy Shevchenko
          • RE: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Wang, Lawrence (NSB - CN/Hangzhou)
  • Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts, Wolfram Sang
• [PATCH net-next v3 0/6] MCTP I2C driver, Matt Johnston
  • [PATCH net-next v3 2/6] i2c: dev: Handle 255 byte blocks for i2c ioctl, Matt Johnston
  • [PATCH net-next v3 3/6] i2c: aspeed: Allow 255 byte block transfers, Matt Johnston
  • [PATCH net-next v3 1/6] i2c: core: Allow 255 byte transfers for SMBus 3.x, Matt Johnston
  • [PATCH net-next v3 4/6] i2c: npcm7xx: Allow 255 byte block SMBus transfers, Matt Johnston
  • [PATCH net-next v3 5/6] dt-bindings: net: New binding mctp-i2c-controller, Matt Johnston
  • [PATCH net-next v3 6/6] mctp i2c: MCTP I2C binding driver, Matt Johnston
  • Re: [PATCH net-next v3 0/6] MCTP I2C driver, patchwork-bot+netdevbpf
    • Re: [PATCH net-next v3 0/6] MCTP I2C driver, Wolfram Sang
      • Re: [PATCH net-next v3 0/6] MCTP I2C driver, Jakub Kicinski
        • Re: [PATCH net-next v3 0/6] MCTP I2C driver, Wolfram Sang
      • Re: [PATCH net-next v3 0/6] MCTP I2C driver, Matt Johnston
        • Re: [PATCH net-next v3 0/6] MCTP I2C driver, Wolfram Sang
• [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook, Hans de Goede
  • [PATCH v2 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier(), Hans de Goede
  • [PATCH v2 02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging, Hans de Goede
  • [PATCH v2 03/20] power: supply: bq25890: Rename IILIM field to IINLIM, Hans de Goede
  • [PATCH v2 07/20] power: supply: bq25890: Add support to read back the settings from the chip, Hans de Goede
  • [PATCH v2 06/20] power: supply: bq25890: Add support to skip reset at probe() / remove(), Hans de Goede
  • [PATCH v2 05/20] power: supply: bq25890: Add a bq25890_rw_init_data() helper, Hans de Goede
  • [PATCH v2 04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures, Hans de Goede
    • Re: [PATCH v2 04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures, Hans de Goede
  • [PATCH v2 08/20] power: supply: bq25890: Enable charging on boards where we skip reset, Hans de Goede
  • [PATCH v2 09/20] power: supply: bq25890: Drop dev->platform_data == NULL check, Hans de Goede
    • Re: [PATCH v2 09/20] power: supply: bq25890: Drop dev->platform_data == NULL check, Andy Shevchenko
  • [PATCH v2 11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator, Hans de Goede
    • Re: [PATCH v2 11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator, Andy Shevchenko
  • [PATCH v2 12/20] power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection, Hans de Goede
  • [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper, Hans de Goede
    • Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper, Yauhen Kharuzhy
      • Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper, Hans de Goede
        • Message not available
          • Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper, Hans de Goede
            • Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper, Yauhen Kharuzhy
  • [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol, Hans de Goede
    • Re: [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol, Andy Shevchenko
      • Re: [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol, Hans de Goede
  • [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function, Hans de Goede