Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.
Co-developed-by: Robert Richter <rrichter@xxxxxxx>
Signed-off-by: Robert Richter <rrichter@xxxxxxx>
Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
To: Guenter Roeck <linux@xxxxxxxxxxxx>
To: linux-watchdog@xxxxxxxxxxxxxxx
To: Jean Delvare <jdelvare@xxxxxxxx>
To: linux-i2c@xxxxxxxxxxxxxxx
To: Wolfram Sang <wsa@xxxxxxxxxx>
To: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
To: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
Cc: Robert Richter <rrichter@xxxxxxx>
Cc: Thomas Lendacky <thomas.lendacky@xxxxxxx>
---
drivers/watchdog/sp5100_tco.c | 65 +++++++++++++++++++----------------
1 file changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index dd9a744f82f8..ecc273b9b17f 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -223,6 +223,41 @@ static u32 sp5100_tco_read_pm_reg32(u8 index)
return val;
}
+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+ struct watchdog_device *wdd = &tco->wdd;
+ struct device *dev = wdd->parent;
+ u32 val;
+
+ val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+ if (val & SP5100_WDT_DISABLED) {
+ dev_err(dev, "Watchdog hardware is disabled\n");
+ return(-ENODEV);
+ }
+
+ /*
+ * Save WatchDogFired status, because WatchDogFired flag is
+ * cleared here.
+ */
+ if (val & SP5100_WDT_FIRED)
+ wdd->bootstatus = WDIOF_CARDRESET;
+
+ /* Set watchdog action to reset the system */
+ val &= ~SP5100_WDT_ACTION_RESET;
+ writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+ /* Set a reasonable heartbeat before we stop the timer */
+ tco_timer_set_timeout(wdd, wdd->timeout);
+
+ /*
+ * Stop the TCO before we change anything so we don't race with
+ * a zeroed timer.
+ */
+ tco_timer_stop(wdd);
+
+ return 0;
+}
+
static int sp5100_tco_setupdevice(struct device *dev,
struct watchdog_device *wdd)
{
@@ -348,35 +383,7 @@ static int sp5100_tco_setupdevice(struct device *dev,
/* Setup the watchdog timer */
tco_timer_enable(tco);
- val = readl(SP5100_WDT_CONTROL(tco->tcobase));
- if (val & SP5100_WDT_DISABLED) {
- dev_err(dev, "Watchdog hardware is disabled\n");
- ret = -ENODEV;
- goto unreg_region;
- }
-
- /*
- * Save WatchDogFired status, because WatchDogFired flag is
- * cleared here.
- */
- if (val & SP5100_WDT_FIRED)
- wdd->bootstatus = WDIOF_CARDRESET;
- /* Set watchdog action to reset the system */
- val &= ~SP5100_WDT_ACTION_RESET;
- writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
- /* Set a reasonable heartbeat before we stop the timer */
- tco_timer_set_timeout(wdd, wdd->timeout);
-
- /*
- * Stop the TCO before we change anything so we don't race with
- * a zeroed timer.
- */
- tco_timer_stop(wdd);
-
- release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
- return 0;
+ ret = sp5100_tco_timer_init(tco);
unreg_region:
release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
--
2.30.2
