Save a bit of code for older Tegra platforms by compiling out
VI's I2C mode support that's used only for Tegra210.
$ size i2c-tegra.o
text data bss dec hex filename
10385 240 8 10633 2989 i2c-tegra.o (full)
9617 240 8 9865 2689 i2c-tegra.o (no-dvc)
9389 240 8 9637 25a5 i2c-tegra.o (no-vi)
8617 240 8 8865 22a1 i2c-tegra.o (no-vi,no-dvc)
Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
---
drivers/i2c/busses/Kconfig | 8 ++++++++
drivers/i2c/busses/i2c-tegra.c | 20 ++++++++++++--------
2 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b557b832bfec..2dd5974acc14 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1087,6 +1087,14 @@ config I2C_TEGRA_DVC
If you say yes to this option, tegra-i2c will also support
I2C controller that is part of DVC in Tegra20 SoCs.
+config I2C_TEGRA_VI
+ bool "NVIDIA Tegra VI I2C controller"
+ depends on I2C_TEGRA
+ default y if ARCH_TEGRA_210_SOC
+ help
+ If you say yes to this option, tegra-i2c will also support
+ I2C controller that is part of VI in Tegra210 SoCs.
+
config I2C_TEGRA_BPMP
tristate "NVIDIA Tegra BPMP I2C controller"
depends on TEGRA_BPMP || COMPILE_TEST
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 60ecf6c9f649..140fbce203cb 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -295,6 +295,7 @@ struct tegra_i2c_dev {
};
#define IS_DVC(dev) (IS_ENABLED(CONFIG_I2C_TEGRA_DVC) && dev->is_dvc)
+#define IS_VI(dev) (IS_ENABLED(CONFIG_I2C_TEGRA_VI) && dev->is_vi)
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned int reg)
@@ -315,7 +316,7 @@ static u32 tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
{
if (IS_DVC(i2c_dev))
reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
- else if (i2c_dev->is_vi)
+ else if (IS_VI(i2c_dev))
reg = 0xc00 + (reg << 2);
return reg;
@@ -444,7 +445,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
u32 *dma_buf;
int err;
- if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
+ if (!i2c_dev->hw->has_apb_dma || IS_VI(i2c_dev))
return 0;
if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
@@ -635,7 +636,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, val, I2C_CNFG);
i2c_writel(i2c_dev, 0, I2C_INT_MASK);
- if (i2c_dev->is_vi)
+ if (IS_VI(i2c_dev))
tegra_i2c_vi_init(i2c_dev);
switch (i2c_dev->bus_clk_rate) {
@@ -687,7 +688,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
return err;
}
- if (!IS_DVC(i2c_dev) && !i2c_dev->is_vi) {
+ if (!IS_DVC(i2c_dev) && !IS_VI(i2c_dev)) {
u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
@@ -1612,7 +1613,9 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
static const struct of_device_id tegra_i2c_of_match[] = {
{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
+#if IS_ENABLED(CONFIG_I2C_TEGRA_VI)
{ .compatible = "nvidia,tegra210-i2c-vi", .data = &tegra210_i2c_hw, },
+#endif
{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
@@ -1643,7 +1646,8 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
of_device_is_compatible(np, "nvidia,tegra20-i2c-dvc"))
i2c_dev->is_dvc = true;
- if (of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
+ if (IS_ENABLED(CONFIG_I2C_TEGRA_VI) &&
+ of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
i2c_dev->is_vi = true;
}
@@ -1656,7 +1660,7 @@ static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->hw == &tegra20_i2c_hw || i2c_dev->hw == &tegra30_i2c_hw)
i2c_dev->clocks[i2c_dev->nclocks++].id = "fast-clk";
- if (i2c_dev->is_vi)
+ if (IS_VI(i2c_dev))
i2c_dev->clocks[i2c_dev->nclocks++].id = "slow";
err = devm_clk_bulk_get(i2c_dev->dev, i2c_dev->nclocks,
@@ -1777,7 +1781,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
* VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
* be used for atomic transfers.
*/
- if (!i2c_dev->is_vi)
+ if (!IS_VI(i2c_dev))
pm_runtime_irq_safe(i2c_dev->dev);
pm_runtime_enable(i2c_dev->dev);
@@ -1850,7 +1854,7 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
* power ON/OFF during runtime PM resume/suspend, meaning that
* controller needs to be re-initialized after power ON.
*/
- if (i2c_dev->is_vi) {
+ if (IS_VI(i2c_dev)) {
err = tegra_i2c_init(i2c_dev);
if (err)
goto disable_clocks;
--
2.30.2
