Move port selection code into a separate function. Refactor is in preparation for following MMIO changes. Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx> --- drivers/i2c/busses/i2c-piix4.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 35fcb61f4750..58b613b78c97 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -700,6 +700,19 @@ static void piix4_imc_wakeup(void) release_region(KERNCZ_IMC_IDX, 2); } +static int piix4_sb800_port_sel(u8 port) +{ + u8 smba_en_lo; + + outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); + + if ((smba_en_lo & piix4_port_mask_sb800) != port) + outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port, + SB800_PIIX4_SMB_IDX + 1); + + return (smba_en_lo & piix4_port_mask_sb800); +} /* * Handles access to multiple SMBus ports on the SB800. * The port is selected by bits 2:1 of the smb_en register (0x2c). @@ -716,8 +729,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, unsigned short piix4_smba = adapdata->smba; int retries = MAX_TIMEOUT; int smbslvcnt; - u8 smba_en_lo; - u8 port; + u8 prev_port; int retval; retval = piix4_sb800_region_setup(&adap->dev); @@ -777,18 +789,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, } } - outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); - smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); - - port = adapdata->port; - if ((smba_en_lo & piix4_port_mask_sb800) != port) - outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port, - SB800_PIIX4_SMB_IDX + 1); + prev_port = piix4_sb800_port_sel(adapdata->port); retval = piix4_access(adap, addr, flags, read_write, command, size, data); - outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1); + piix4_sb800_port_sel(prev_port); /* Release the semaphore */ outb_p(smbslvcnt | 0x20, SMBSLVCNT); -- 2.30.2