Linux CAN Development
[Prev Page][Next Page]
[RFC PATCH v2] can: virtio: Initial virtio CAN driver.,
Mikhail Golubev-Ciuchea
[PATCH V5] can: usb: f81604: add Fintek F81604 support,
Ji-Ze Hong (Peter Hong)
[PATCH 0/4] Enable multiple MCAN on AM62x,
Judith Mendez
[PATCH] can: dev: add transceiver capabilities to xilinx_can,
Marcel Hellwig
[RFC PATCH 0/5] Enable multiple MCAN on AM62x,
Judith Mendez
[PATCH V4] can: usb: f81604: add Fintek F81604 support,
Ji-Ze Hong (Peter Hong)
J1939-22 implementation proposal, quinton . cook
[PATCH] can: allow MSG_CMSG_COMPAT flag in recvmsg() syscalls,
Oliver Hartkopp
[PATCH net 0/4] pull-request: can 2023-04-05,
Marc Kleine-Budde
[PATCH net-next 0/10] pull-request: can-next 2023-04-04-2,
Marc Kleine-Budde
- [PATCH net-next 03/10] dt-bindings: net: can: add STM32 bxcan DT bindings, Marc Kleine-Budde
- [PATCH net-next 05/10] ARM: dts: stm32: add pin map for CAN controller on stm32f4, Marc Kleine-Budde
- [PATCH net-next 10/10] kvaser_usb: convert USB IDs to hexadecimal values, Marc Kleine-Budde
- [PATCH net-next 07/10] can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init, Marc Kleine-Budde
- [PATCH net-next 04/10] ARM: dts: stm32: add CAN support on stm32f429, Marc Kleine-Budde
- [PATCH net-next 08/10] dt-bindings: can: fsl,flexcan: add optional power-domains property, Marc Kleine-Budde
- [PATCH net-next 02/10] dt-bindings: arm: stm32: add compatible for syscon gcan node, Marc Kleine-Budde
- [PATCH net-next 09/10] can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING, Marc Kleine-Budde
- [PATCH net-next 06/10] can: bxcan: add support for ST bxCAN controller, Marc Kleine-Budde
- [PATCH net-next 01/10] can: isotp: add module parameter for maximum pdu size, Marc Kleine-Budde
[syzbot] Monthly can report, syzbot
[PATCH] can: CAN_BXCAN should depend on ARCH_STM32,
Geert Uytterhoeven
[PATCH net-next 0/10] pull-request: can-next 2023-04-04,
Marc Kleine-Budde
- [PATCH net-next 01/10] can: isotp: add module parameter for maximum pdu size, Marc Kleine-Budde
- [PATCH net-next 02/10] dt-bindings: arm: stm32: add compatible for syscon gcan node, Marc Kleine-Budde
- [PATCH net-next 04/10] ARM: dts: stm32: add CAN support on stm32f429, Marc Kleine-Budde
- [PATCH net-next 03/10] dt-bindings: net: can: add STM32 bxcan DT bindings, Marc Kleine-Budde
- [PATCH net-next 10/10] kvaser_usb: convert USB IDs to hexadecimal values, Marc Kleine-Budde
- [PATCH net-next 08/10] dt-bindings: can: fsl,flexcan: add optional power-domains property, Marc Kleine-Budde
- [PATCH net-next 05/10] ARM: dts: stm32: add pin map for CAN controller on stm32f4, Marc Kleine-Budde
- [PATCH net-next 06/10] can: bxcan: add support for ST bxCAN controller, Marc Kleine-Budde
- [PATCH net-next 07/10] can: rcar_canfd: ircar_canfd_probe(): fix plain integer in transceivers[] init, Marc Kleine-Budde
- [PATCH net-next 09/10] can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING, Marc Kleine-Budde
- Re: [PATCH net-next 0/10] pull-request: can-next 2023-04-04, Marc Kleine-Budde
[PATCH v1] net: can: j1939: Fix out-of-bounds memory access in j1939_tp_tx_dat_new,
Oleksij Rempel
[PATCH v3 55/55] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES), David Howells
[RFC PATCH v4] can: isotp: fix race between isotp_sendsmg() and isotp_release(),
Oliver Hartkopp
[RFC PATCH v3] can: isotp: fix race between isotp_sendsmg() and isotp_release(), Oliver Hartkopp
[PATCH v3] can: isotp: fix poll() to not report false EPOLLOUT events,
Michal Sojka
[RFC PATCH v2] can: isotp: fix race between isotp_sendsmg() and isotp_release(), Oliver Hartkopp
[RFC PATCH] can: isotp: fix race between isotp_sendsmg() and isotp_release(),
Oliver Hartkopp
[PATCH] can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING,
Frank Jungclaus
[PATCH] can: isotp: use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos,
Oliver Hartkopp
[RFC PATCH v2 48/48] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES),
David Howells
[PATCH can-next v2] kvaser_usb: convert USB IDs to hexadecimal values,
Oliver Hartkopp
[PATCH] can: rcar_canfd: Fix plain integer in transceivers[] init,
Geert Uytterhoeven
[PATCH v10 0/5] can: bxcan: add support for ST bxCAN controller,
Dario Binacchi
[PATCH] dt-bindings: can: fsl,flexcan: add optional power-domains property,
Peng Fan (OSS)
[PATCH v9 0/5] can: bxcan: add support for ST bxCAN controller,
Dario Binacchi
[PATCH can-next] kvaser_usb: convert USB IDs to hexadecimal values,
Oliver Hartkopp
[PATCH net 0/2] pull-request: can 2023-03-27,
Marc Kleine-Budde
[PATCH net-next 0/11] pull-request: can-next 2023-03-27,
Marc Kleine-Budde
- [PATCH net-next 01/11] can: rcar_canfd: Add transceiver support, Marc Kleine-Budde
- [PATCH net-next 02/11] can: rcar_canfd: Improve error messages, Marc Kleine-Budde
- [PATCH net-next 03/11] can: c_can: Remove redundant pci_clear_master, Marc Kleine-Budde
- [PATCH net-next 04/11] can: ctucanfd: Remove redundant pci_clear_master, Marc Kleine-Budde
- [PATCH net-next 07/11] can: m_can: Remove repeated check for is_peripheral, Marc Kleine-Budde
- [PATCH net-next 05/11] can: kvaser_pciefd: Remove redundant pci_clear_master, Marc Kleine-Budde
- [PATCH net-next 06/11] can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union, Marc Kleine-Budde
- [PATCH net-next 08/11] can: m_can: Always acknowledge all interrupts, Marc Kleine-Budde
- [PATCH net-next 09/11] can: m_can: Remove double interrupt enable, Marc Kleine-Budde
- [PATCH net-next 10/11] can: m_can: Disable unused interrupts, Marc Kleine-Budde
- [PATCH net-next 11/11] can: m_can: Keep interrupts enabled during peripheral read, Marc Kleine-Budde
[PATCH V3] can: usb: f81604: add Fintek F81604 support,
Ji-Ze Hong (Peter Hong)
[PATCH v8 0/5] can: bxcan: add support for ST bxCAN controller,
Dario Binacchi
[RFC PATCH v3] can: isotp: add module parameter for maximum pdu size,
Oliver Hartkopp
WARNING in isotp_tx_timer_handler and WARNING in print_tainted,
Dae R. Jeong
J1939-22,
Quinton Cook
[PATCH v1] can: j1939: prevent deadlock by moving j1939_sk_errqueue(), Oleksij Rempel
[PATCH 1/3] can: c_can: Remove redundant pci_clear_master,
Cai Huoqing
[PATCH v4 0/2] can: rcar_canfd: Add transceiver support,
Geert Uytterhoeven
[PATCH V2] can: usb: f81604: add Fintek F81604 support,
Ji-Ze Hong (Peter Hong)
[PATCH] dt-bindings: phy: Drop unneeded quotes,
Rob Herring
[PATCH v2] dt-bindings: net: Drop unneeded quotes,
Rob Herring
[PATCH] dt-bindings: net: Drop unneeded quotes,
Rob Herring
[PATCH] can: usb: f81604: add Fintek F81604 support,
Ji-Ze Hong (Peter Hong)
[RFC PATCH 28/28] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES),
David Howells
[PATCH v3 00/16] can: m_can: Optimizations for m_can/tcan part 2,
Markus Schneider-Pargmann
- [PATCH v3 01/16] can: m_can: Remove repeated check for is_peripheral, Markus Schneider-Pargmann
- [PATCH v3 04/16] can: m_can: Disable unused interrupts, Markus Schneider-Pargmann
- [PATCH v3 02/16] can: m_can: Always acknowledge all interrupts, Markus Schneider-Pargmann
- [PATCH v3 06/16] can: m_can: Write transmit header and data in one transaction, Markus Schneider-Pargmann
- [PATCH v3 03/16] can: m_can: Remove double interrupt enable, Markus Schneider-Pargmann
- [PATCH v3 08/16] can: m_can: Implement transmit coalescing, Markus Schneider-Pargmann
- [PATCH v3 09/16] can: m_can: Add rx coalescing ethtool support, Markus Schneider-Pargmann
- [PATCH v3 11/16] can: m_can: Cache tx putidx, Markus Schneider-Pargmann
- [PATCH v3 12/16] can: m_can: Use the workqueue as queue, Markus Schneider-Pargmann
- [PATCH v3 07/16] can: m_can: Implement receive coalescing, Markus Schneider-Pargmann
- [PATCH v3 05/16] can: m_can: Keep interrupts enabled during peripheral read, Markus Schneider-Pargmann
- [PATCH v3 10/16] can: m_can: Add tx coalescing ethtool support, Markus Schneider-Pargmann
- [PATCH v3 13/16] can: m_can: Introduce a tx_fifo_in_flight counter, Markus Schneider-Pargmann
- [PATCH v3 14/16] can: m_can: Use tx_fifo_in_flight for netif_queue control, Markus Schneider-Pargmann
- [PATCH v3 16/16] can: m_can: Implement transmit submission coalescing, Markus Schneider-Pargmann
- [PATCH v3 15/16] can: m_can: Implement BQL, Markus Schneider-Pargmann
- Re: [PATCH v3 00/16] can: m_can: Optimizations for m_can/tcan part 2, Marc Kleine-Budde
[PATCH v2] net: Use of_property_read_bool() for boolean properties,
Rob Herring
[PATCH v3] can: rcar_canfd: Improve error messages,
Geert Uytterhoeven
[PATCH 0/5] can: tcan4x5x: Introduce tcan4552/4553,
Markus Schneider-Pargmann
[PATCH v3 20/38] net: handle HAS_IOPORT dependencies,
Niklas Schnelle
[PATCH] FS, NET: Fix KMSAN uninit-value in vfs_write,
Ivan Orlov
[PATCH v2] can: rcar_canfd: Improve error messages,
Geert Uytterhoeven
[RFC PATCH v2] can: isotp: add module parameter for maximum pdu size,
Oliver Hartkopp
[RFC PATCH] can: isotp: add module parameter for maximum pdu size,
Oliver Hartkopp
[PATCH] net: Use of_property_read_bool() for boolean properties,
Rob Herring
[PATCH] can: rcar_canfd: Print mnemotechnic error codes,
Geert Uytterhoeven
[PATCH v2] can: rcar_canfd: Add transceiver support,
Geert Uytterhoeven
[PATCH] dt-bindings: Fix SPI and I2C bus node names in examples,
Rob Herring
Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples, Bartosz Golaszewski
Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples, Rob Herring
please re-send [RFC PATCH] can: isotp: fix poll() to not report false positive EPOLLOUT events,
Oliver Hartkopp
[RFC 0/6] pcmcia: separate 16-bit support from cardbus,
Arnd Bergmann
Re: [RFC 0/6] pcmcia: separate 16-bit support from cardbus, Russell King (Oracle)
Re: [RFC 0/6] pcmcia: separate 16-bit support from cardbus, Larry Finger
Re: [RFC 0/6] pcmcia: separate 16-bit support from cardbus, Ondrej Zary
[PATCH AUTOSEL 6.2 32/53] can: isotp: check CAN address family in isotp_bind(), Sasha Levin
[PATCH AUTOSEL 6.1 29/49] can: isotp: check CAN address family in isotp_bind(), Sasha Levin
[RFC PATCH] can: isotp: fix poll() to not report false positive EPOLLOUT events, Michal Sojka
[PATCH] can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union,
Frank Jungclaus
[PATCH -next] can: mscan: mpc5xxx: Use of_property_present() helper,
Yang Li
candlelight CAN-FD TX echo,
Marc Kleine-Budde
[PATCH net-next 0/4] pull-request: can-next 2023-02-17 - fixed,
Marc Kleine-Budde
[PATCH net-next 0/4] pull-request: can-next 2023-02-17,
Marc Kleine-Budde
[PATCH v3 0/3] can: esd_usb: Some more preparation for supporting esd CAN-USB/3,
Frank Jungclaus
[PATCH -next] can: ctucanfd: Use devm_platform_ioremap_resource(),
Yang Li
[PATCH v2 0/3] can: esd_usb: Some more preparation for supporting esd CAN-USB/3,
Frank Jungclaus
Re: error: too many arguments to function ‘can_calc_bittiming’,
Randy Dunlap
[linux-next:master] BUILD REGRESSION 20f513df926fac0594a3b65f79d856bd64251861, kernel test robot
[PATCH net-next 0/2] pull-request: can-next 2023-02-08,
Marc Kleine-Budde
[PATCH] can: bittiming: fix can_calc_bittiming() dummy helper,
Arnd Bergmann
[linux-next:master] BUILD REGRESSION 38d2b86a665b5e86371a1a30228bce259aa6c101, kernel test robot
xlinix_can: bug when sending two RTR frames,
Oliver Hartkopp
[PATCH] can: bittiming: can_calc_bittiming(): add missing parameter to no-op function, Marc Kleine-Budde
[mkl-can-next:testing 42/51] drivers/net/can/dev/bittiming.c:79:24: error: too many arguments to function 'can_calc_bittiming',
kernel test robot
[PATCH net 0/1] pull-request: can 2023-02-07,
Marc Kleine-Budde
[RESEND PATCH v7 0/5] can: bxcan: add support for ST bxCAN controller,
Dario Binacchi
[PATCH] can: proc: properly format table,
Marc Kleine-Budde
[PATCH net-next 0/47] pull-request: can-next 2023-02-06,
Marc Kleine-Budde
- [PATCH net-next 18/47] can: ems_pci: Add read/write register and post irq functions, Marc Kleine-Budde
- [PATCH net-next 16/47] can: ems_pci: Add Asix AX99100 definitions, Marc Kleine-Budde
- [PATCH net-next 02/47] can: isotp: check CAN address family in isotp_bind(), Marc Kleine-Budde
- [PATCH net-next 14/47] can: rcar_canfd: Add helper variable dev, Marc Kleine-Budde
- [PATCH net-next 40/47] can: bittiming: factor out can_sjw_set_default() and can_sjw_check(), Marc Kleine-Budde
- [PATCH net-next 05/47] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4H support, Marc Kleine-Budde
- [PATCH net-next 42/47] can: bittiming: can_sjw_check(): report error via netlink and harmonize error value, Marc Kleine-Budde
- [PATCH net-next 19/47] can: ems_pci: Initialize CAN controller base addresses, Marc Kleine-Budde
- [PATCH net-next 04/47] dt-bindings: can: renesas,rcar-canfd: R-Car V3U is R-Car Gen4, Marc Kleine-Budde
- [PATCH net-next 06/47] dt-bindings: can: renesas,rcar-canfd: Add transceiver support, Marc Kleine-Budde
- [PATCH net-next 35/47] can: dev: register_candev(): ensure that bittiming const are valid, Marc Kleine-Budde
- [PATCH net-next 01/47] can: gw: give feedback on missing CGW_FLAGS_CAN_IIF_TX_OK flag, Marc Kleine-Budde
- [PATCH net-next 41/47] can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value, Marc Kleine-Budde
- [PATCH net-next 46/47] can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT(), Marc Kleine-Budde
- [PATCH net-next 47/47] can: bittiming: can_validate_bitrate(): report error via netlink, Marc Kleine-Budde
- [PATCH net-next 43/47] can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment, Marc Kleine-Budde
- [PATCH net-next 20/47] can: ems_pci: Add IRQ enable, Marc Kleine-Budde
- [PATCH net-next 44/47] can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW, Marc Kleine-Budde
- [PATCH net-next 32/47] can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1, Marc Kleine-Budde
- [PATCH net-next 07/47] can: rcar_canfd: Fix R-Car V3U CAN mode selection, Marc Kleine-Budde
- [PATCH net-next 21/47] can: ems_pci: Deassert hardware reset, Marc Kleine-Budde
- [PATCH net-next 33/47] can: bittiming: can_fixup_bittiming(): set effective tq, Marc Kleine-Budde
- [PATCH net-next 22/47] can: ems_pci: Add myself as module author, Marc Kleine-Budde
- [PATCH net-next 31/47] can: bittiming(): replace open coded variants of can_bit_time(), Marc Kleine-Budde
- [PATCH net-next 34/47] can: bittiming: can_get_bittiming(): use direct return and remove unneeded else, Marc Kleine-Budde
- [PATCH net-next 37/47] can: netlink: can_validate(): validate sample point for CAN and CAN-FD, Marc Kleine-Budde
- [PATCH net-next 45/47] can: bittiming: can_calc_bittiming(): clean up SJW handling, Marc Kleine-Budde
- [PATCH net-next 09/47] can: rcar_canfd: Abstract out DCFG address differences, Marc Kleine-Budde
- [PATCH net-next 08/47] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses, Marc Kleine-Budde
- [PATCH net-next 24/47] can: peak_usb: add callback to read CAN channel ID of PEAK CAN-FD devices, Marc Kleine-Budde
- [PATCH net-next 38/47] can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT(), Marc Kleine-Budde
- [PATCH net-next 29/47] can: peak_usb: align CAN channel ID format in log with sysfs attribute, Marc Kleine-Budde
- [PATCH net-next 30/47] can: peak_usb: Reorder include directives alphabetically, Marc Kleine-Budde
- [PATCH net-next 10/47] can: rcar_canfd: Add support for R-Car Gen4, Marc Kleine-Budde
- [PATCH net-next 23/47] can: peak_usb: rename device_id to CAN channel ID, Marc Kleine-Budde
- [PATCH net-next 25/47] can: peak_usb: allow flashing of the CAN channel ID, Marc Kleine-Budde
- [PATCH net-next 11/47] can: rcar_canfd: Fix R-Car Gen4 DCFG.DSJW field width, Marc Kleine-Budde
- [PATCH net-next 26/47] can: peak_usb: replace unregister_netdev() with unregister_candev(), Marc Kleine-Budde
- [PATCH net-next 17/47] can: ems_pci: Initialize BAR registers, Marc Kleine-Budde
- [PATCH net-next 28/47] can: peak_usb: export PCAN CAN channel ID as sysfs device attribute, Marc Kleine-Budde
- [PATCH net-next 27/47] can: peak_usb: add ethtool interface to user-configurable CAN channel identifier, Marc Kleine-Budde
- [PATCH net-next 12/47] can: rcar_canfd: Fix R-Car Gen4 CFCC.CFTML field width, Marc Kleine-Budde
- [PATCH net-next 03/47] can: mcp251xfd: regmap: optimizing transfer size for CRC transfers size 1, Marc Kleine-Budde
- [PATCH net-next 13/47] can: rcar_canfd: Sort included header files, Marc Kleine-Budde
- [PATCH net-next 39/47] can: bittiming: can_changelink() pass extack down callstack, Marc Kleine-Budde
- [PATCH net-next 15/47] can: ems_pci: Fix code style, copyright and email address, Marc Kleine-Budde
- [PATCH net-next 36/47] can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided, Marc Kleine-Budde
[can-next] can: raw: use temp variable instead of rolling back config, Oliver Hartkopp
[PATCH v2] can: mcp251xfd: regmap: optimizing transfer size for CRC transfers size 1, Marc Kleine-Budde
[PATCH v2 00/17] can: bittiming: cleanups and rework SJW handling,
Marc Kleine-Budde
- [PATCH v2 03/17] can: bittiming: can_fixup_bittiming(): set effective tq, Marc Kleine-Budde
- [PATCH v2 01/17] can: bittiming(): replace open coded variants of can_bit_time(), Marc Kleine-Budde
- [PATCH v2 02/17] can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1, Marc Kleine-Budde
- [PATCH v2 05/17] can: dev: register_candev(): ensure that bittiming const are valid, Marc Kleine-Budde
- [PATCH v2 04/17] can: bittiming: can_get_bittiming(): use direct return and remove unneeded else, Marc Kleine-Budde
- [PATCH v2 06/17] can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided, Marc Kleine-Budde
- [PATCH v2 07/17] can: netlink: can_validate(): validate sample point for CAN and CAN-FD, Marc Kleine-Budde
- [PATCH v2 08/17] can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT(), Marc Kleine-Budde
- [PATCH v2 11/17] can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value, Marc Kleine-Budde
- [PATCH v2 09/17] can: bittiming: can_changelink() pass extack down callstack, Marc Kleine-Budde
- [PATCH v2 12/17] can: bittiming: can_sjw_check(): report error via netlink and harmonize error value, Marc Kleine-Budde
- [PATCH v2 13/17] can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment, Marc Kleine-Budde
- [PATCH v2 10/17] can: bittiming: factor out can_sjw_set_default() and can_sjw_check(), Marc Kleine-Budde
- [PATCH v2 16/17] can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT(), Marc Kleine-Budde
- [PATCH v2 17/17] can: bittiming: can_validate_bitrate(): report error via netlink, Marc Kleine-Budde
- [PATCH v2 14/17] can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW, Marc Kleine-Budde
- [PATCH v2 15/17] can: bittiming: can_calc_bittiming(): clean up SJW handling, Marc Kleine-Budde
- Re: [PATCH v2 00/17] can: bittiming: cleanups and rework SJW handling, Vincent Mailhol
[PATCH net 0/5] pull-request: can 2023-02-02,
Marc Kleine-Budde
[PATCH v4] can: raw: fix CAN FD frame transmissions over CAN XL devices, Oliver Hartkopp
[PATCH v3] can: raw: fix CAN FD frame transmissions over CAN XL devices, Oliver Hartkopp
[PATCH v2] can: raw: fix CAN FD frame transmissions over CAN XL devices,
Oliver Hartkopp
[PATCH] can: raw: fix CAN FD frame transmissions over CAN XL devices, Oliver Hartkopp
[PATCH] can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq, Marc Kleine-Budde
[PATCH] can: etas_es58x: do not send disable channel command if device is unplugged,
Vincent Mailhol
[PATCH] can: mcp251xfd: optimizing transfer size for CRC transfers size 1,
Thomas Kopp
[PATCH v2 00/18] can: m_can: Optimizations for m_can/tcan part 2,
Markus Schneider-Pargmann
- [PATCH v2 01/18] can: tcan4x5x: Remove reserved register 0x814 from writable table, Markus Schneider-Pargmann
- [PATCH v2 02/18] can: tcan4x5x: Check size of mram configuration, Markus Schneider-Pargmann
- [PATCH v2 04/18] can: m_can: Always acknowledge all interrupts, Markus Schneider-Pargmann
- [PATCH v2 06/18] can: m_can: Disable unused interrupts, Markus Schneider-Pargmann
- [PATCH v2 05/18] can: m_can: Remove double interrupt enable, Markus Schneider-Pargmann
- [PATCH v2 03/18] can: m_can: Remove repeated check for is_peripheral, Markus Schneider-Pargmann
- [PATCH v2 07/18] can: m_can: Keep interrupts enabled during peripheral read, Markus Schneider-Pargmann
- [PATCH v2 08/18] can: m_can: Write transmit header and data in one transaction, Markus Schneider-Pargmann
- [PATCH v2 11/18] can: m_can: Add rx coalescing ethtool support, Markus Schneider-Pargmann
- [PATCH v2 12/18] can: m_can: Add tx coalescing ethtool support, Markus Schneider-Pargmann
- [PATCH v2 18/18] can: m_can: Implement transmit submission coalescing, Markus Schneider-Pargmann
- [PATCH v2 14/18] can: m_can: Use the workqueue as queue, Markus Schneider-Pargmann
- [PATCH v2 09/18] can: m_can: Implement receive coalescing, Markus Schneider-Pargmann
- [PATCH v2 10/18] can: m_can: Implement transmit coalescing, Markus Schneider-Pargmann
- [PATCH v2 17/18] can: m_can: Implement BQL, Markus Schneider-Pargmann
- [PATCH v2 16/18] can: m_can: Use tx_fifo_in_flight for netif_queue control, Markus Schneider-Pargmann
- [PATCH v2 15/18] can: m_can: Introduce a tx_fifo_in_flight counter, Markus Schneider-Pargmann
- [PATCH v2 13/18] can: m_can: Cache tx putidx, Markus Schneider-Pargmann
[PATCH can-next] can: gw: give feedback on missing CGW_FLAGS_CAN_IIF_TX_OK flag,
Oliver Hartkopp
[PATCH v1 0/2] can: mcp251xfd: better workaround broken TX FIFO STA register read,
Marc Kleine-Budde
[PATCH 00/12] can: rcar_canfd: Add support for R-Car V4H systems,
Geert Uytterhoeven
- [PATCH 01/12] dt-bindings: can: renesas,rcar-canfd: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
- [PATCH 03/12] dt-bindings: can: renesas,rcar-canfd: Add transceiver support, Geert Uytterhoeven
- [PATCH 06/12] can: rcar_canfd: Abstract out DCFG address differences, Geert Uytterhoeven
- [PATCH 10/12] can: rcar_canfd: Sort included header files, Geert Uytterhoeven
- [PATCH 05/12] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses, Geert Uytterhoeven
- [PATCH 07/12] can: rcar_canfd: Add support for R-Car Gen4, Geert Uytterhoeven
- [PATCH 09/12] can: rcar_canfd: Fix R-Car Gen4 CFCC.CFTML field width, Geert Uytterhoeven
- [PATCH 02/12] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4H support, Geert Uytterhoeven
- [PATCH 12/12] can: rcar_canfd: Add transceiver support, Geert Uytterhoeven
- [PATCH 08/12] can: rcar_canfd: Fix R-Car Gen4 DCFG.DSJW field width, Geert Uytterhoeven
- [PATCH 04/12] can: rcar_canfd: Fix R-Car V3U CAN mode selection, Geert Uytterhoeven
- [PATCH 11/12] can: rcar_canfd: Add helper variable dev, Geert Uytterhoeven
- Re: [PATCH 00/12] can: rcar_canfd: Add support for R-Car V4H systems, Wolfram Sang
- Re: [PATCH 00/12] can: rcar_canfd: Add support for R-Car V4H systems, Simon Horman
- Re: [PATCH 01/12] dt-bindings: can: renesas,rcar-canfd: R-Car V3U is R-Car Gen4, Rob Herring
- Re: [PATCH 02/12] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4H support, Rob Herring
- Re: [PATCH 03/12] dt-bindings: can: renesas,rcar-canfd: Add transceiver support, Rob Herring
[PATCH v2 0/8] can: ems_pci: Add support for CPC-PCIe v3,
Gerhard Uttenthaler
- [PATCH v2 1/8] can: ems_pci: Fix code style, copyright and email address, Gerhard Uttenthaler
- [PATCH v2 2/8] can: ems_pci: Add Asix AX99100 definitions, Gerhard Uttenthaler
- [PATCH v2 3/8] can: ems_pci: Initialize BAR registers, Gerhard Uttenthaler
- [PATCH v2 4/8] can: ems_pci: Add read/write register and post irq functions, Gerhard Uttenthaler
- [PATCH v2 5/8] can: ems_pci: Initialize CAN controller base addresses, Gerhard Uttenthaler
- [PATCH v2 6/8] can: ems_pci: Add IRQ enable, Gerhard Uttenthaler
- [PATCH v2 7/8] can: ems_pci: Deassert hardware reset, Gerhard Uttenthaler
- [PATCH v2 8/8] can: ems_pci: Add myself as module author, Gerhard Uttenthaler
- Re: [PATCH v2 0/8] can: ems_pci: Add support for CPC-PCIe v3, Marc Kleine-Budde
[PATCH 0/8] can: ems_pci: Add support for CPC-PCIe v3,
Gerhard Uttenthaler
- [PATCH 2/8] can: ems_pci: Added Asix AX99100 definitions, Gerhard Uttenthaler
- [PATCH 1/8] can: ems_pci: Fixed code style, copyright and email address, Gerhard Uttenthaler
- [PATCH 5/8] can: ems_pci: Initialize CAN controller base addresses, Gerhard Uttenthaler
- [PATCH 3/8] can: ems_pci: Initialize BAR registers, Gerhard Uttenthaler
- [PATCH 7/8] can: ems_pci: Deassert hardware reset, Gerhard Uttenthaler
- [PATCH 6/8] can: ems_pci: Added IRQ enable, Gerhard Uttenthaler
- [PATCH 8/8] can: ems_pci: Added MODULE_AUTHOR, Gerhard Uttenthaler
- [PATCH 4/8] can: ems_pci: Added read/write register and post irq functions, Gerhard Uttenthaler
- Re: [PATCH 0/8] can: ems_pci: Add support for CPC-PCIe v3, Gerhard Uttenthaler
- Re: [PATCH 0/8] can: ems_pci: Add support for CPC-PCIe v3, Vincent Mailhol
[Index of Archives]
[Automotive Discussions]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]
