On Tue, Mar 14, 2023 at 04:11:56PM +0100, Markus Schneider-Pargmann wrote: > Hi Marc and everyone, > > This series introduces two new chips tcan-4552 and tcan-4553. The > generic driver works in general but needs a few small changes. These are > caused by the removal of wake and state pins. > > I included two patches from the optimization series and will remove them > from the optimization series. Hopefully it avoids conflicts and not > polute the other series with tcan4552/4553 stuff. > > Best, > Markus > > optimization series: > https://lore.kernel.org/lkml/20221221152537.751564-1-msp@xxxxxxxxxxxx > > Markus Schneider-Pargmann (5): > dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants > can: tcan4x5x: Remove reserved register 0x814 from writable table > can: tcan4x5x: Check size of mram configuration > can: tcan4x5x: Rename ID registers to match datasheet > can: tcan4x5x: Add support for tcan4552/4553 > > .../devicetree/bindings/net/can/tcan4x5x.txt | 11 +- > drivers/net/can/m_can/m_can.c | 16 +++ > drivers/net/can/m_can/m_can.h | 1 + > drivers/net/can/m_can/tcan4x5x-core.c | 122 ++++++++++++++---- > drivers/net/can/m_can/tcan4x5x-regmap.c | 1 - > 5 files changed, 121 insertions(+), 30 deletions(-) > The logic and coding style looks OK to me, but CAN-specific stuff should be reviewed by someone else. Just one nitpick in the last patch. Thanks, Michal For entire series: Reviewed-by: Michal Kubiak <michal.kubiak@xxxxxxxxx> > -- > 2.39.2 >
