Hi Thomas, Thank you for your review. You had me reopen ISO 11898-1 (haven't done so for a long time). I mostly agree with you. Many of your points are not related to this patch but to the already existing definition. So I will handle these in a separate patch. I will prepare a v2 within the next few days. On Mon. 8 May 2023 à 21:29, Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote: > On 08.05.2023 08:54:18, Thomas.Kopp@xxxxxxxxxxxxx wrote: > > I was working on the same thing on Friday but didn't get around to > > sending it off, so here are a couple thoughts I had when working on > > the defines in length.h > > > > The definitions for IFS in here are called intermission in the > > standard > > ACK, and IMF seems to be a common abbreviation. ACK. I think I will put a reference to both naming (intermission and IMF) and use the IMF forward for conciseness. > > and I'd argue they shouldn't be part of the frame at all. > > The diagram in https://www.can-cia.org/can-knowledge/can/can-fd/ > suggests that IMF is part of the frame. ISO 11898-1:2015 section 10.4.6 "Specification of inter-frame space" makes it clear that the intermission is not part of the frame but part of the "Inter-frame space". To close the discussion, I would finally argue that the intermission occurs after the EOF bit. Something after an "End of Frame" is not part of the frame, right? I agree with and will follow Thomas's suggestion. > > To > > quote the ISO: "DFs and RFs shall be separated from preceding frames, > > whatever frame type they are (DF, RF, EF, OF), by a time period called > > inter-frame space." > > > > So, my suggestion would be to pull out the 3 bit IFS definition that's > > currently in and introduce 11 bit Bus idle and if necessary 3 bit > > Intermission separately. ACK. > > index 6995092b774ec..62e92c1553376 100644 > > --- a/include/linux/can/length.h > > +++ b/include/linux/can/length.h > > @@ -6,6 +6,26 @@ > > #ifndef _CAN_LENGTH_H > > #define _CAN_LENGTH_H > > > > +/* > > + * First part of the Inter Frame Space > > + */ > > +#define CAN_INTERMISSION_BITS 3 > > + > > +/* > > + * Number of consecutive recessive bits on the bus for integration etc. > > + */ > > +#define CAN_IDLE_CONDITION_BITS 11 > > + > > > > The field currently called Stuff bit count (SBC) is also not correct > > I'd say. I'm not sure about the history but given that this is > > dependent on the DLC I think what's meant is the number of Fixed Stuff > > bits (FSB) . The ISO does not define a term for the Stuff bit Count > > but the CiA did define/document it this way. What's meant though is > > not the number of fixed stuff bits (FSB) which the comment implies > > here but the modulo 8 3 bit gray-code followed by the parity bit. So > > for the FD frame definitions I'd propose something like this: Renaming > > the current SBC to FSB and adding the SBC. ACK. I double checked the standard, you are right. > > /* > > * Size of a CAN-FD Standard Frame > > @@ -69,17 +87,17 @@ > > * Error Status Indicator (ESI) 1 > > * Data length code (DLC) 4 > > * Data field 0...512 > > - * Stuff Bit Count (SBC) 0...16: 4 20...64:5 > > + * Stuff Bit Count (SBC) 4 > > ACK > > > * CRC 0...16: 17 20...64:21 > > * CRC delimiter (CD) 1 > > + * Fixed Stuff bits (FSB) 0...16: 6 20...64:7 > > As far as I understand > https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8338047 the FSB > is 5 or 6. Reading the ISO, the fixed bit stuff applies to the CRC field (which, in the standard nomenclature, includes both the stuff count and the CRC sequence). The CRC field starts with a fixed stuff bit and then has another fixed stuff bit after each fourth bit. So the formula would be: FSB count = 1 + round_down(len(CRC field)/4) = 1 + round_down((len(stuff count) + len(CRC sequence))/4) In case of CRC_17: FSB count = 1 + round_down((4 + 17)/4) = 6 This is coherent with the last figure of https://www.can-cia.org/can-knowledge/can/can-fd/ which shows 6 FSB for CRC_17. In case of CRC_21: FSB count = 1 + round_down((4 + 21)/4) = 7 So, ACK for Thomas, NACK for Marc (sorry :)) > > * ACK slot (AS) 1 > > * ACK delimiter (AD) 1 > > * End-of-frame (EOF) 7 > > - * Inter frame spacing 3 > > * > > - * assuming CRC21, rounded up and ignoring bitstuffing > > + * assuming CRC21, rounded up and ignoring dynamic bitstuffing > > */ Yours sincerely, Vincent Mailhol
