Re: [PATCH v2 1/6] can: esd_usb: Make use of existing kernel macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21.05.2023 18:16:13, Vincent MAILHOL wrote:
> Thanks for the patch.
> 
> On Sat. 20 May 2023 at 04:57, Frank Jungclaus <frank.jungclaus@xxxxxx> wrote:
> > Make use of existing kernel macros:
> > - Use the unit suffixes from linux/units.h for the controller clock
> > frequencies
> > - Use the BIT() and the GENMASK() macro to set specific bits in some
> >   constants
> > - Use CAN_MAX_DLEN (instead of directly using the value 8) for the
> > maximum CAN payload length
> >
> > Additionally:
> > - Spend some commenting for the previously changed constants
> > - Add the current year to the copyright notice
> > - While adding the header linux/units.h to the list of include files
> > also sort that list alphabetically
> >
> > Suggested-by: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
> > Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@xxxxxxxxxxxxxx/
> > Link: https://lore.kernel.org/all/CAMZ6RqKdg5YBufa0C+ttzJvoG=9yuti-8AmthCi4jBbd08JEtw@xxxxxxxxxxxxxx/
> > Suggested-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> > Link: https://lore.kernel.org/all/20230518-grower-film-ea8b5f853f3e-mkl@xxxxxxxxxxxxxx/
> > Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
> > ---
> >  drivers/net/can/usb/esd_usb.c | 40 ++++++++++++++++++-----------------
> >  1 file changed, 21 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> > index d33bac3a6c10..32354cfdf151 100644
> > --- a/drivers/net/can/usb/esd_usb.c
> > +++ b/drivers/net/can/usb/esd_usb.c
> > @@ -3,19 +3,20 @@
> >   * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro
> >   *
> >   * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@xxxxxx>
> > - * Copyright (C) 2022 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx>
> > + * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx>
> >   */
> > +#include <linux/can.h>
> > +#include <linux/can/dev.h>
> > +#include <linux/can/error.h>
> > +
> >  #include <linux/ethtool.h>
> > -#include <linux/signal.h>
> > -#include <linux/slab.h>
> >  #include <linux/module.h>
> >  #include <linux/netdevice.h>
> > +#include <linux/signal.h>
> > +#include <linux/slab.h>
> > +#include <linux/units.h>
> >  #include <linux/usb.h>
> >
> > -#include <linux/can.h>
> > -#include <linux/can/dev.h>
> > -#include <linux/can/error.h>
> > -
> >  MODULE_AUTHOR("Matthias Fuchs <socketcan@xxxxxx>");
> >  MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@xxxxxx>");
> >  MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces");
> > @@ -27,8 +28,8 @@ MODULE_LICENSE("GPL v2");
> >  #define USB_CANUSBM_PRODUCT_ID 0x0011
> >
> >  /* CAN controller clock frequencies */
> > -#define ESD_USB2_CAN_CLOCK     60000000
> > -#define ESD_USBM_CAN_CLOCK     36000000
> > +#define ESD_USB2_CAN_CLOCK     (60 * MEGA) /* Hz */
> > +#define ESD_USBM_CAN_CLOCK     (36 * MEGA) /* Hz */
> >
> >  /* Maximum number of CAN nets */
> >  #define ESD_USB_MAX_NETS       2
> > @@ -42,20 +43,21 @@ MODULE_LICENSE("GPL v2");
> >  #define CMD_IDADD              6 /* also used for IDADD_REPLY */
> >
> >  /* esd CAN message flags - dlc field */
> > -#define ESD_RTR                        0x10
> > +#define ESD_RTR        BIT(4)
> > +
> >
> >  /* esd CAN message flags - id field */
> > -#define ESD_EXTID              0x20000000
> > -#define ESD_EVENT              0x40000000
> > -#define ESD_IDMASK             0x1fffffff
> > +#define ESD_EXTID      BIT(29)
> > +#define ESD_EVENT      BIT(30)
> > +#define ESD_IDMASK     GENMASK(28, 0)
> >
> >  /* esd CAN event ids */
> >  #define ESD_EV_CAN_ERROR_EXT   2 /* CAN controller specific diagnostic data */
> >
> >  /* baudrate message flags */
> > -#define ESD_USB_UBR            0x80000000
> > -#define ESD_USB_LOM            0x40000000
> > -#define ESD_USB_NO_BAUDRATE    0x7fffffff
> > +#define ESD_USB_LOM    BIT(30) /* 0x40000000, Listen Only Mode */
> > +#define ESD_USB_UBR    BIT(31) /* 0x80000000, User Bit Rate (controller BTR) in bits 0..27 */
>                                      ^^^^^^^^^^
> 
> As pointented by Marc, no need for redundant comment with the hexadecimal value.

Fixed while applying.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux