Prefix all the structures with the device name. For commonly used structures make use of (the module name) esd_usb_. For esd CAN-USB/2 and CAN-USB/Micro specific structures use esd_usb_2_ and esd_usb_m. Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@xxxxxxxxxxxxxx/ Suggested-by: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx> Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx> --- drivers/net/can/usb/esd_usb.c | 42 +++++++++++++++++------------------ 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c index 9b0ed07911e1..24eebb7ee5f1 100644 --- a/drivers/net/can/usb/esd_usb.c +++ b/drivers/net/can/usb/esd_usb.c @@ -89,13 +89,13 @@ MODULE_LICENSE("GPL v2"); #define ESD_USB_MAX_RX_URBS 4 #define ESD_USB_MAX_TX_URBS 16 /* must be power of 2 */ -struct header_msg { +struct esd_usb_header_msg { u8 len; /* len is always the total message length in 32bit words */ u8 cmd; u8 rsvd[2]; }; -struct version_msg { +struct esd_usb_version_msg { u8 len; u8 cmd; u8 rsvd; @@ -103,7 +103,7 @@ struct version_msg { __le32 drv_version; }; -struct version_reply_msg { +struct esd_usb_version_reply_msg { u8 len; u8 cmd; u8 nets; @@ -114,7 +114,7 @@ struct version_reply_msg { __le32 ts; }; -struct rx_msg { +struct esd_usb_rx_msg { u8 len; u8 cmd; u8 net; @@ -132,7 +132,7 @@ struct rx_msg { }; }; -struct tx_msg { +struct esd_usb_tx_msg { u8 len; u8 cmd; u8 net; @@ -142,7 +142,7 @@ struct tx_msg { u8 data[CAN_MAX_DLEN]; }; -struct tx_done_msg { +struct esd_usb_tx_done_msg { u8 len; u8 cmd; u8 net; @@ -151,7 +151,7 @@ struct tx_done_msg { __le32 ts; }; -struct id_filter_msg { +struct esd_usb_id_filter_msg { u8 len; u8 cmd; u8 net; @@ -159,7 +159,7 @@ struct id_filter_msg { __le32 mask[ESD_USB_MAX_ID_SEGMENT + 1]; }; -struct set_baudrate_msg { +struct esd_usb_set_baudrate_msg { u8 len; u8 cmd; u8 net; @@ -169,14 +169,14 @@ struct set_baudrate_msg { /* Main message type used between library and application */ union __packed esd_usb_msg { - struct header_msg hdr; - struct version_msg version; - struct version_reply_msg version_reply; - struct rx_msg rx; - struct tx_msg tx; - struct tx_done_msg txdone; - struct set_baudrate_msg setbaud; - struct id_filter_msg filter; + struct esd_usb_header_msg hdr; + struct esd_usb_version_msg version; + struct esd_usb_version_reply_msg version_reply; + struct esd_usb_rx_msg rx; + struct esd_usb_tx_msg tx; + struct esd_usb_tx_done_msg txdone; + struct esd_usb_set_baudrate_msg setbaud; + struct esd_usb_id_filter_msg filter; }; static struct usb_device_id esd_usb_table[] = { @@ -899,8 +899,8 @@ static const struct ethtool_ops esd_usb_ethtool_ops = { .get_ts_info = ethtool_op_get_ts_info, }; -static const struct can_bittiming_const esd_usb2_bittiming_const = { - .name = "esd_usb2", +static const struct can_bittiming_const esd_usb_2_bittiming_const = { + .name = "esd_usb_2", .tseg1_min = 1, .tseg1_max = 16, .tseg2_min = 1, @@ -911,7 +911,7 @@ static const struct can_bittiming_const esd_usb2_bittiming_const = { .brp_inc = 1, }; -static int esd_usb2_set_bittiming(struct net_device *netdev) +static int esd_usb_2_set_bittiming(struct net_device *netdev) { struct esd_usb_net_priv *priv = netdev_priv(netdev); const struct can_bittiming_const *btc = priv->can.bittiming_const; @@ -1026,8 +1026,8 @@ static int esd_usb_probe_one_net(struct usb_interface *intf, int index) priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; } - priv->can.bittiming_const = &esd_usb2_bittiming_const; - priv->can.do_set_bittiming = esd_usb2_set_bittiming; + priv->can.bittiming_const = &esd_usb_2_bittiming_const; + priv->can.do_set_bittiming = esd_usb_2_set_bittiming; priv->can.do_set_mode = esd_usb_set_mode; priv->can.do_get_berr_counter = esd_usb_get_berr_counter; -- 2.25.1
