On 17.05.2023 21:22:46, Frank Jungclaus wrote: > As suggested by Vincent Mailhol make use of existing kernel macros: > - Use the unit suffixes from linux/units.h for the controller clock > frequencies > - Use the BIT() macro to set specific bits in some constants > - Use CAN_MAX_DLEN (instead of directly using the value 8) for the > maximum CAN payload length > > Additionally: > - Spend some commenting for the previously changed constants > - Add the current year to the copyright notice > - While adding the header linux/units.h to the list of include files > also sort that list alphabetically > > Suggested-by: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx> > Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@xxxxxxxxxxxxxx/ > Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx> > --- > drivers/net/can/usb/esd_usb.c | 38 ++++++++++++++++++----------------- > 1 file changed, 20 insertions(+), 18 deletions(-) > > diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c > index d33bac3a6c10..042dda98b3db 100644 > --- a/drivers/net/can/usb/esd_usb.c > +++ b/drivers/net/can/usb/esd_usb.c > @@ -3,19 +3,20 @@ > * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro > * > * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@xxxxxx> > - * Copyright (C) 2022 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx> > + * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx> > */ > +#include <linux/can.h> > +#include <linux/can/dev.h> > +#include <linux/can/error.h> > + > #include <linux/ethtool.h> > -#include <linux/signal.h> > -#include <linux/slab.h> > #include <linux/module.h> > #include <linux/netdevice.h> > +#include <linux/signal.h> > +#include <linux/slab.h> > +#include <linux/units.h> > #include <linux/usb.h> > > -#include <linux/can.h> > -#include <linux/can/dev.h> > -#include <linux/can/error.h> > - > MODULE_AUTHOR("Matthias Fuchs <socketcan@xxxxxx>"); > MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@xxxxxx>"); > MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces"); > @@ -27,8 +28,8 @@ MODULE_LICENSE("GPL v2"); > #define USB_CANUSBM_PRODUCT_ID 0x0011 > > /* CAN controller clock frequencies */ > -#define ESD_USB2_CAN_CLOCK 60000000 > -#define ESD_USBM_CAN_CLOCK 36000000 > +#define ESD_USB2_CAN_CLOCK (60 * MEGA) /* Hz */ > +#define ESD_USBM_CAN_CLOCK (36 * MEGA) /* Hz */ > > /* Maximum number of CAN nets */ > #define ESD_USB_MAX_NETS 2 > @@ -42,20 +43,21 @@ MODULE_LICENSE("GPL v2"); > #define CMD_IDADD 6 /* also used for IDADD_REPLY */ > > /* esd CAN message flags - dlc field */ > -#define ESD_RTR 0x10 > +#define ESD_RTR BIT(4) /* 0x10 */ Nitpick, personal style preference, maintainability: For me the hex constant is redundant information, and it's not checked by the compiler, please remove it. > + > > /* esd CAN message flags - id field */ > -#define ESD_EXTID 0x20000000 > -#define ESD_EVENT 0x40000000 > -#define ESD_IDMASK 0x1fffffff > +#define ESD_EXTID BIT(29) /* 0x20000000 */ > +#define ESD_EVENT BIT(30) /* 0x40000000 */ > +#define ESD_IDMASK 0x1fffffff Please use GEN_MASK. > > /* esd CAN event ids */ > #define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */ > > /* baudrate message flags */ > -#define ESD_USB_UBR 0x80000000 > -#define ESD_USB_LOM 0x40000000 > -#define ESD_USB_NO_BAUDRATE 0x7fffffff > +#define ESD_USB_LOM BIT(30) /* 0x40000000, Listen Only Mode */ > +#define ESD_USB_UBR BIT(31) /* 0x80000000, User Bit Rate (controller BTR) in bits 0..27 */ > +#define ESD_USB_NO_BAUDRATE 0x7fffffff /* bit rate unconfigured */ You might use GEN_MASK here, too. regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Attachment:
signature.asc
Description: PGP signature
