Re: [PATCH v2 0/5] can: bxcan: add support for single peripheral configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.04.2023 22:45:35, Dario Binacchi wrote:
> 
> The series adds support for managing bxCAN controllers in single peripheral
> configuration.
> Unlike stm32f4 SOCs, where bxCAN controllers are only in dual peripheral
> configuration, stm32f7 SOCs contain three CAN peripherals, CAN1 and CAN2
> in dual peripheral configuration and CAN3 in single peripheral
> configuration:
> - Dual CAN peripheral configuration:
>  * CAN1: Primary bxCAN for managing the communication between a secondary
>    bxCAN and the 512-byte SRAM memory.
>  * CAN2: Secondary bxCAN with no direct access to the SRAM memory.
>    This means that the two bxCAN cells share the 512-byte SRAM memory and
>    CAN2 can't be used without enabling CAN1.
> - Single CAN peripheral configuration:
>  * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
>    512-byte SRAM memory.

This really looks good! Great work! Who takes the DT changes? I can take
the whole series.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux