Linux Bluetooth Wireless Development

• Thread Index

• Re: [PATCH 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v1 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990
  • From: Harish Bandi <c-hbandi@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] Bluetooth: hci_qca: Added support to read the regulator values from DTS
  • From: Harish Bandi <c-hbandi@xxxxxxxxxxxxxx>
• [PATCH v1 0/2] Enable Bluetooth functionality for wcn3998.
  • From: Harish Bandi <c-hbandi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] bluetooth: 6lowpan: check neighbour table for SLAAC
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• [PATCH v1] Bluetooth: hci_qca: Enable the ldisc for ROME for x86 platforms.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
  • From: Jukka Rissanen <jukka.rissanen@xxxxxxxxxxxxxxx>
• Re: [PATCH BlueZ] adapter: Fix length calculation of filter UUIDs on big endian
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: iBeacon with the dbus advertising-api
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
  • From: rjliao@xxxxxxxxxxxxxx
• Re: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH 0/2] Bluetooth: hci_qca: Fix WCN3990 firmware download
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Peripheral notifications not showing up
  • From: Barry Byford <31baz66@xxxxxxxxx>
• Re: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: Strange SCO problem
  • From: Yaroslav Isakov <yaroslav.isakov@xxxxxxxxx>
• Re: [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
  • From: Michael Scott <mike@xxxxxxxxxxxx>
• BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!
  • From: syzbot <syzbot+91fd909b6e62ebe06131@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Fw files for QCA BT Chip QCA6174
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: Error setting UUIDs discovery filter on big endian systems
  • From: Matt <mwtaylor@xxxxxxxxx>
• Re: Error setting UUIDs discovery filter on big endian systems
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• iBeacon with the dbus advertising-api
  • From: Marco Okker <marco@xxxxxxxx>
• Re: Error setting UUIDs discovery filter on big endian systems
  • From: Matt <mwtaylor@xxxxxxxxx>
• [PATCH BlueZ] adapter: Fix length calculation of filter UUIDs on big endian
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Error setting UUIDs discovery filter on big endian systems
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Strange SCO problem
  • From: Sathish Narasimman <nsathish41@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_qca: Remove redundant initializations to zero
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Strange SCO problem
  • From: Yaroslav Isakov <yaroslav.isakov@xxxxxxxxx>
• [PATCH] Bluetooth: hci_qca: Remove redundant initializations to zero
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 2/2] Bluetooth: btbcm: Add default address for BCM2076B1
  • From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
• Re: Error setting UUIDs discovery filter on big endian systems
  • From: Matt <mwtaylor@xxxxxxxxx>
• [PATCH 1/2] Bluetooth: btbcm: Add entry for BCM2076B1 UART Bluetooth
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/2] Bluetooth: btbcm: Add default address for BCM2076B1
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Operating central and peripheral roles concurrently
  • From: Martin Townsend <mtownsend1973@xxxxxxxxx>
• [PATCH] Bluetooth: mediatek: Fixed incorrect type in assignment
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Tomas Bortoli <tomasbortoli@xxxxxxxxx>
• Re: [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Tomas Bortoli <tomasbortoli@xxxxxxxxx>
• Re: [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• always need to disconnect and then reconnect to get HFP functional
  • From: "Brian J. Murrell" <brian@xxxxxxxxxxxxxxx>
• Is it possible to Switch off the 3Mbit/s EDR mode without disabling the 2Mbit/s EDR mode with Bluez?
  • From: Peter Wagner <wagnerpeter932@xxxxxxxxx>
• 答复: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: 陆朱伟 <alex_lu@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: rk3288 Tinker Board (S) add bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [bluetooth-next:master 15/15] drivers/bluetooth/btmtkuart.c:671:18: sparse: warning: incorrect type in assignment (different base types)
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Tomas Bortoli <tomasbortoli@xxxxxxxxx>
• Re: pull request: bluetooth-next 2019-03-02
  • From: David Miller <davem@xxxxxxxxxxxxx>
• pull request: bluetooth-next 2019-03-02
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Re: [PATCH RESEND v2] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH RESEND v2] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] hci_qca: Reduce delay after sending baudrate request for WCN3990
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• 答复: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: 陆朱伟 <alex_lu@xxxxxxxxxxxxxx>
• [PATCH BlueZ] mesh: Fix array processing in Send, Publish, Join
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• RE: [PATCH BlueZ] doc/mesh-api: Fix Attach() method signature
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: net: bluetooth: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v2 0/2] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v2 2/2] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH BlueZ] doc/mesh-api: Fix Attach() method signature
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
  • From: Michael Scott <mike@xxxxxxxxxxxx>
• Re: [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
  • From: Josua Mayer <josua.mayer@xxxxxx>
• [PATCH] net/bluetooth: Fix bound check in event handling
  • From: Tomas Bortoli <tomasbortoli@xxxxxxxxx>
• INFO: trying to register non-static key in hci_uart_send_frame
  • From: syzbot <syzbot+a8587ba69fc78395d947@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH BlueZ 0/3 v2] mesh: Implement Leave() method
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• RE: [PATCH BlueZ] mesh: Fix type checking for 32 vs 64 bit systems
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: net: bluetooth: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] hci_qca: Reduce delay after sending baudrate request for WCN3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Reduce delay after sending baudrate request for WCN3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• RE: Query regarding BLE Mesh provisioning
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• [PATCH BlueZ] mesh: Fix type checking for 32 vs 64 bit systems
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• [Bug 200039] BT advertising packet wakes up the system from S3 and suspend-to-idle
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ 7/7] monitor: Decode LL_CLOCK_ACCURACY_*
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 6/7] monitor: Decode LL_PERIODIC_SYNC_IND
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 5/7] monitor: Decode LL_CTE_*
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 4/7] monitor: Add decoding support for LL_MIN_USED_CHANNELS
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 3/7] monitor: Add decoding support for LL_PHY_UPDATE_IND
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 2/7] monitor: Add decoding support for LL_PHY_*
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 1/7] monitor: Add decoding support for LL_LENGTH_*
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Reduce delay after sending baudrate request for WCN3990
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_bcm: fix double-free irq on removal
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] hci_qca: Reduce delay after sending baudrate request for WCN3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 0/2] Reduce delay after sending baudrate request for WCN3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 2/2] hci_qca: Reduce delay after sending baudrate request for WCN3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 1/2] hci_qca: Use msleep() instead of open coding it
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 0/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 3/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 1/3] Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_bcm: fix double-free irq on removal
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: Does BlueZ support the LE only controller which does not have BR/EDR?
  • From: Edward Jo <challenge.jo@xxxxxxxxx>
• Re: [PATCH v2 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH] tools/hciattach: TI: Increase the HCI request timeout value
  • From: arnaud.mouiche@xxxxxxxxxxx
• [PATCH] monitor: Fix LE Set Extended Advertising Parameters TX power decoding
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH BlueZ] test/example-advertisement: add shutdown code
  • From: Luiz Augusto Von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v4 0/3] Add quirk for reading BD_ADDR from fwnode property
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 1/5] Bluetooth: Expose supported LE states via debugfs
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_bcm: fix double-free irq on removal
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: mgmt: Use struct_size() helper
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v1] Bluetooth: hci_qca: Update baudrate change wait time for wcn3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 3/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 1/3] Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 0/3] Bluetooth: hci_qca: Add delay after power-off pulse
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• RE: [PATCH BlueZ 2/3 v2] mesh: Cleanup storage save and remove procedures
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• [PATCH][next] Bluetooth: mgmt: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] Bluetooth: hci_bcm: fix double-free irq on removal
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH BlueZ] shell: Allow multiple prompt inputs
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Fw files for QCA BT Chip QCA6174
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: Does BlueZ support the LE only controller which does not have BR/EDR?
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• Query regarding BLE Mesh provisioning
  • From: Atul Kumar Rai <a.rai@xxxxxxxxxxx>
• Does BlueZ support the LE only controller which does not have BR/EDR?
  • From: Edward Jo <challenge.jo@xxxxxxxxx>
• Re: pull request: bluetooth-next 2019-02-24
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: When connecting to NAP bnep0 can not go up
  • From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pasi Kärkkäinen <pasik@xxxxxx>
• pull request: bluetooth-next 2019-02-24
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto()
  • From: Jeremy Cline <jcline@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto()
  • From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH v2 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH BlueZ] test/example-advertisement: add shutdown code
  • From: "Hunt, Preston" <preston.hunt@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: btusb: request wake pin with NOAUTOEN
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH BlueZ] shell: Allow multiple prompt inputs
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 3/3 v2] mesh: Implement Leave() method on Network interface
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 2/3 v2] mesh: Cleanup storage save and remove procedures
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 1/3 v2] mesh: Re-arrange node cleanup functions
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 0/3 v2] mesh: Implement Leave() method
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH 1/3] Bluetooth: btusb: add QCA6174A compatible properties
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] Bluetooth: btusb: request wake pin with NOAUTOEN
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Firmware files for QCA BT chip wcn3990
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH 2/2] linux-firmware: Update firmware file for Intel Bluetooth,9560
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH BlueZ 1/4] doc/advertising-api: Add support for setting Secondary Channel
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v1] Bluetooth: hci_qca: Update baudrate change wait time for wcn3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH BlueZ] mesh: Fix for file naming convention
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• [PATCH BlueZ v6 1/1] mesh: Fix for file naming convention
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• Firmware files for QCA BT chip wcn3990
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v1] Bluetooth: hci_qca: Update baudrate change wait time for wcn3990
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH 5/5] Bluetooth: Fix set advertising while scanning
  • From: Andrzej Kaczmarek <andrzej.kaczmarek@xxxxxxxxxxx>
• [PATCH 4/5] Bluetooth: Fix set advertising while connected
  • From: Andrzej Kaczmarek <andrzej.kaczmarek@xxxxxxxxxxx>
• [PATCH 3/5] Bluetooth: Allow new connection if already a slave
  • From: Andrzej Kaczmarek <andrzej.kaczmarek@xxxxxxxxxxx>
• [PATCH 2/5] Bluetooth: Add le_state_supported helper macro
  • From: Andrzej Kaczmarek <andrzej.kaczmarek@xxxxxxxxxxx>
• [PATCH 1/5] Bluetooth: Expose supported LE states via debugfs
  • From: Andrzej Kaczmarek <andrzej.kaczmarek@xxxxxxxxxxx>
• KASAN: use-after-free Read in h5_reset_rx
  • From: syzbot <syzbot+899a33dc0fa0dbaf06a6@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH BlueZ 3/3] mesh: Implement Leave() method on Network interface
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 2/3] mesh: Cleanup storage save and remove procedures
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 1/3] mesh: Re-arrange node cleanup functions
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 0/3] mesh: Implement Leave() method
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• RE: [PATCH BlueZ 0/3] mesh: Save/restore application keys
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 0/6]Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Sean Wang <sean.wang@xxxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/3] Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v4 2/3] Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v4 3/3] Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v4 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH RESEND 0/3] Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] monitor: Fix LE Read Transmit Power Command deconding
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [RFC] Bluetooth: Retry configure request if result is L2CAP_CONF_UNKNOWN
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 02/14] ARM: dts: IGEP: Add WiLink UART node
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: drivers/bluetooth/Kconfig BT_HCIUART_RTL depends on ACPI
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: a2mp: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: When connecting to NAP bnep0 can not go up
  • From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6]Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 5/6] Bluetooth: mediatek: update the common setup between MT7622 and other devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 4/6] Bluetooth: mediatek: pass a pointer to mtk_hci_wmt_sync
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 3/6] Bluetooth: mediatek: fix up an error path to restore bdev->tx_state
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 2/6] Bluetooth: mediatek: trivial typo fix
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: net: bluetooth: add support for MediaTek MT7663U and MT7668U UART devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: a2mp: Use struct_size() helper
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: hci_event: Use struct_size() helper
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [RFC] Bluetooth: Retry configure request if result is L2CAP_CONF_UNKNOWN
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ldisc: Initialize hci_dev before open()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v11 0/3] Bug fixes for Qualcomm BT chip wcn3990
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH RESEND 0/3] Add quirk for reading BD_ADDR from fwnode property
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: remove redundant zero check on count
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: drivers/bluetooth/Kconfig BT_HCIUART_RTL depends on ACPI
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: Firmware files for QCA BT chip WCN3990.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: Firmware files for QCA BT chip WCN3990.
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• WARNING: ODEBUG bug in hci_uart_tty_close
  • From: syzbot <syzbot+9fd324c8c2176a6022d3@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Firmware files for QCA BT chip WCN3990.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [Bug 199873] Bluetooth 3.0 mouses are automatically disconnected after connected
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Backporting BLE+MIDI plugin to bluez 5.43 ?
  • From: Mykle James Hansen <mykle@xxxxxxxxx>
• When connecting to NAP bnep0 can not go up
  • From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
• When connecting to NAP bnep0 can not go up
  • From: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
• Potential QCA9377 firmware bug, spurious command complete event
  • From: João Paulo Rechi Vita <jprvita@xxxxxxxxx>
• [PATCH BlueZ 4/4] client: Add advertise.secondary command
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 3/4] advertising: Add implementation of SecondaryChannel
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 1/4] doc/advertising-api: Add support for setting Secondary Channel
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 2/4] advertising: Add implementation of SupportedSecondaryChannels
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH] monitor: Fix LE Read Transmit Power Command deconding
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• Re: [PATCH] pre-shared passcode: secure pairing for "no keyboard, no display" devices
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: [PATCH] pre-shared passcode: secure pairing for "no keyboard, no display" devices
  • From: Pavel Machek <pavel@xxxxxx>
• [RFC BlueZ] doc/advertising-api: Add support for setting Secondary Channel
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH 0/6]Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 6/6] Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 2/6] Bluetooth: mediatek: trivial typo fix
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: net: bluetooth: add support for MediaTek MT7663U and MT7668U UART devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 5/6] Bluetooth: mediatek: update the common setup between MT7622 and other devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 3/6] Bluetooth: mediatek: fix up an error path to restore bdev->tx_state
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH 4/6] Bluetooth: mediatek: pass a pointer to mtk_hci_wmt_sync
  • From: <sean.wang@xxxxxxxxxxxx>
• Re: [PATCH] pre-shared passcode: secure pairing for "no keyboard, no display" devices
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: [Zephyr-devel] Bluetooth mesh using nrf52 pca10040 #bluetoothmesh #nrf52832
  • From: "Hedberg, Johan" <johan.hedberg@xxxxxxxxx>
• [Bug 202429] No Bluetooth Adapter on boot - Works after woken up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ 3/3] mesh: Return correct error code for AppKey List command
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 2/3] mesh: Save newly added or updated app key to config file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 1/3] mesh: Separate functions for app key add and update
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 0/3] mesh: Save/restore application keys
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH] pre-shared passcode: secure pairing for "no keyboard, no display" devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] build: Fix missing dependency for btpclient
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [Bug 202429] No Bluetooth Adapter on boot - Works after woken up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH BlueZ 0/5 v2] mesh: Save/restore network keys
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH v5] bluetooth: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• [PATCH 2/2] gitignore: Fix bluetooth-meshd name
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• [PATCH 1/2] build: Fix missing dependency for btpclient
  • From: Szymon Janc <szymon.janc@xxxxxxxxxxx>
• [PATCH v4] Bluetooth: hci_ldisc: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• INFO: trying to register non-static key in hci_uart_flush
  • From: syzbot <syzbot+e8cd9d8b4dfedf394390@xxxxxxxxxxxxxxxxxxxxxxxxx>
• general protection fault in qca_setup
  • From: syzbot <syzbot+8c0dbf8843bb75efaa05@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] bluetooth: Fix WARNING in tty_set_termios()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5] bluetooth: Fix WARNING in tty_set_termios()
  • From: Shuah Khan <shuah@xxxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v7 4/4] Bluetooth: btqca: inject command complete event during fw download
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 3/3] bluetooth: 6lowpan: always check destination address
  • From: Josua Mayer <josua.mayer@xxxxxx>
• [PATCH 2/3] bluetooth: 6lowpan: check neighbour table for SLAAC
  • From: Josua Mayer <josua.mayer@xxxxxx>
• [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
  • From: Josua Mayer <josua.mayer@xxxxxx>
• [PATCH 1/3] bluetooth: 6lowpan: search for destination address in all peers
  • From: Josua Mayer <josua.mayer@xxxxxx>
• Re: [PATCH][next] Bluetooth: a2mp: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: hci_event: Use struct_size() helper
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH][next] Bluetooth: a2mp: Use struct_size() helper
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [RFC] Bluetooth: Retry configure request if result is L2CAP_CONF_UNKNOWN
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH][next] Bluetooth: hci_event: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH][next] Bluetooth: a2mp: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3 0/2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202429] No Bluetooth Adapter on boot - Works after woken up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ 5/5 v2] mesh: Save newly added or updated net key to config file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 4/5 v2] mesh: Save key refresh phase state to node config file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 3/5 v2] mesh: Declare internal functions as static
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 2/5 v2] mesh: Add function to restore net key state from storage
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 1/5 v2] mesh: Separate functions for net key add and update
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 0/5 v2] mesh: Save/restore network keys
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] Bluetooth: hci_ldisc: Initialize hci_dev before open()
  • From: Jeremy Cline <jcline@xxxxxxxxxx>
• Re: [PATCH BlueZ 1/5] mesh: Separate functions for net key add and update
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• [PATCH BlueZ v2] shared/io-libevent2: Add support for libevent2 based IO handing
  • From: Shawn Nock <shawn@xxxxxxxxxxxx>
• Re: [PATCH BlueZ v2] TODO: Fix complexity level for Bluetooth mesh items
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH BlueZ] shared/io-libevent2: Add support for libevent2 based IO handing
  • From: Shawn Nock <shawn@xxxxxxxxxxxx>
• Re: [PATCH BlueZ] shared/io-libevent2: Add support for libevent2 based IO handing
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH BlueZ] shared/io-libevent2: Add support for libevent2 based IO handing
  • From: Shawn Nock <shawn@xxxxxxxxxxxx>
• [PATCH BlueZ 2/2] gatt: Implement "type" option for Characteristic.WriteValue
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 1/2] doc/gatt-api: Add "type" option to Characteristic.WriteValue
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH BlueZ 01/15] shared/crypto: Add bt_crypto_gatt_hash
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202515] Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ 5/5] mesh: Save newly added or updated net key to config file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 4/5] mesh: Save key refresh phase state to node config file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 3/5] mesh: Declare internal functions as static
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 2/5] mesh: Add function to restore net key state from storage
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 1/5] mesh: Separate functions for net key add and update
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ 0/5] mesh: Save/restore network keys
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH v3 0/2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [Bug 202515] New: Bluetooth LE Extended Connect returning Command Disallowed
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3 0/2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH BlueZ 1/5] gatt: Fix invalid read when disconnecting
  • From: Gal Ben Haim <gbenhaim@xxxxxxxxxx>
• [PATCH v3 2/2] Bluetooth: hci_ldisc: Add NULL check for tiocmget() and tiocmset() in hci_uart_set_flow_control()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH v3 1/2] Bluetooth: hci_ath: Add NULL check for tiocmget() and tiocmset() in ath_setup()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH v3 0/2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [Bug 202465] Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ v2] TODO: Fix complexity level for Bluetooth mesh items
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• drivers/bluetooth/Kconfig BT_HCIUART_RTL depends on ACPI
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH BlueZ] TODO: FIx complexity for Bluetooth mesh items
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH BlueZ v2 0/2] Updated mesh D-Bus policy patch
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH BlueZ] mesh: Add MGMT bypass when specifying controller
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH BlueZ] mesh: Add README file
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH BlueZ] mesh: Remove unnecessary variable initialization
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH BlueZ] TODO: Add Bluetooth mesh items
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• [PATCH BlueZ] TODO: Add Bluetooth mesh items
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH] Bluetooth: remove redundant zero check on count
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v4] bluetooth: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v11 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• general protection fault in skb_put
  • From: syzbot <syzbot+65788f9af9d54844389e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v11 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v11 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v11 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v11 0/3] Bug fixes for Qualcomm BT chip wcn3990
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v10 0/3] Bug fixes for Qualcomm BT chip wcn3990.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxxxx>
• [PATCH v10 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxxxx>
• [PATCH v10 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxxxx>
• [PATCH v10 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: Fix decrementing reference count twice in releasing socket
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v3] Bluetooth: Support fast advertising interval
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• RE: [PATCH v2] Bluetooth: Support fast advertising interval
  • From: "Panda, Bharat B" <bharat.b.panda@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH v3] Bluetooth: Support fast advertising interval
  • From: Bharat Bhusan Panda <bharat.b.panda@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH v4] bluetooth: Fix WARNING in tty_set_termios()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH v4] bluetooth: Fix WARNING in tty_set_termios()
  • From: Shuah Khan <shuah@xxxxxxxxxx>
• Re: [PATCH v3] bluetooth: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v3] bluetooth: Fix WARNING in tty_set_termios()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH v3] bluetooth: Fix WARNING in tty_set_termios()
  • From: Shuah Khan <shuah@xxxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH] Bluetooth: hci_ldisc: Add NULL check for tty set_termios operation
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH] Bluetooth: Fix decrementing reference count twice in releasing socket
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: Bluetooth: hci0: last event is not cmd complete (0x0f) with LG TV
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: Directed advertisements from the command line
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Directed advertisements from the command line
  • From: Youssif Saeed <youssif.am.saeed@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH v2] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH BlueZ] mesh: Remove unnecessary variable initialization
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Call to GattManager1.RegisterApplication times out
  • From: David Frey <dpfrey@xxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: shuah <shuah@xxxxxxxxxx>
• [Bug 198699] Kernel regularly logs: Bluetooth: hci0: last event is not cmd complete (0x0f)
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Bluetooth: hci0: last event is not cmd complete (0x0f) with LG TV
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pasi Kärkkäinen <pasik@xxxxxx>
• Re: [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [Bug 202481] lost first keystroke of BT-keyboards after idle
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202481] lost first keystroke of BT-keyboards after idle
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202481] New: lost first keystroke of BT-keyboards after idle
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ] mesh: Add README file
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] tty: Fix WARNING in tty_set_termios()
  • From: Shuah Khan <shuah@xxxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: shuah <shuah@xxxxxxxxxx>
• [PATCH RESEND 0/3] Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH RESEND 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH RESEND 3/3] Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH RESEND 2/3] Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH BlueZ] mesh: Add MGMT bypass when specifying controller
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• Re: Flag for specifying write type to WriteValue in gatt-api.
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: Flag for specifying write type to WriteValue in gatt-api.
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Flag for specifying write type to WriteValue in gatt-api.
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: Flag for specifying write type to WriteValue in gatt-api.
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Flag for specifying write type to WriteValue in gatt-api.
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] doc/gatt-api: Add Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v3] a2dp-codecs: Fix SBC_MAX_BITPOOL and add SBC quality modes
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v3] a2dp-codecs: Fix SBC_MAX_BITPOOL and add SBC quality modes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] a2dp-codecs & avinfo: Simplify defintions and parsing of aptX family
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] avinfo: Dump unknown codecs and unknown categories
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] avinfo: Fix parsing capabilities
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: shuah <shuah@xxxxxxxxxx>
• [Bug 202465] New: Bluetooth adaptor dies - 0489:e0a2 Foxconn / Hon Hai
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• first keystroke of BT-keyboards is missed
  • From: Andrey Butirsky <butirsky@xxxxxxxxx>
• [Bug 86931] hid-generic 0005:099A:0500.0001: unknown main item tag 0x0
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH v2 8/8] client: Don't expose pointer value in attribute path
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 7/8] client: Enable list-attributes to print local attributes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 6/8] client: Enable setting attribute handles
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 5/8] client: Enable Handle property for GATT attributes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 2/8] shared/gatt-db: Allow passing 0 as handle to gatt_db_insert_*
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 4/8] gatt: Write back the handle to Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 3/8] gatt: Implement Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2 1/8] doc/gatt-api: Add Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pasi Kärkkäinen <pasik@xxxxxx>
• [PATCH v2] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH v3] a2dp-codecs: Fix SBC_MAX_BITPOOL and add SBC quality modes
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [Patch v1] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: btusb: btusb_intel_cmd_timeout: use sleeping functions
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH BlueZ 15/15] device: Store Database Hash on storage
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 14/15] shared/gatt-client: Write Client Features
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 13/15] shared/gatt-client: Read database hash if available
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 12/15] gatt: Implement Robust Caching handling for server
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 11/15] shared/gatt-server: Add bt_gatt_server_set_authorize
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 10/15] shared/gatt-db: Add gatt_db_set_authorize
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 09/15] gatt: Add caching support for server
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 08/15] shared/gatt-db: Generate database hash
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 07/15] shared/gatt-db: Introduce Database Hash
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 06/15] monitor: Decode GATT Caching errors
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 05/15] shared/att-types: Add errors introduced by GATT caching
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 04/15] shared/util: Add decoding support for GATT caching attributes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 03/15] lib/uuid: Introduce definition for GATT caching attributes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 02/15] unit/test-crypto: Add test for bt_crypto_gatt_hash
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 01/15] shared/crypto: Add bt_crypto_gatt_hash
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [Patch v1] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: raghuram.hegde@xxxxxxxxx
• [PATCH BlueZ 3/6] gatt: Implement Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 5/6] client: Enable Handle property for GATT attributes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 6/6] client: Enable setting attribute handles
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 4/6] gatt: Write back the handle to Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 1/6] doc/gatt-api: Add Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ 2/6] shared/gatt-db: Allow passing 0 as handle to gatt_db_insert_service
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2] a2dp-codecs: Fix SBC_MAX_BITPOOL and add SBC quality modes
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v2] a2dp-codecs: Fix SBC_MAX_BITPOOL and add SBC quality modes
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] Bluetooth: btusb: btusb_intel_cmd_timeout: use sleeping functions
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: shuah <shuah@xxxxxxxxxx>
• Re: [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: chethan tn <chethantn@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 184/258] Bluetooth: hci_bcm: Handle deferred probing for the clock supply
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 116/170] Bluetooth: Fix unnecessary error message for HCI request completion
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 067/107] Bluetooth: Fix unnecessary error message for HCI request completion
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 51/80] Bluetooth: Fix unnecessary error message for HCI request completion
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.20 220/304] Bluetooth: hci_bcm: Handle deferred probing for the clock supply
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: chethan tn <chethantn@xxxxxxxxx>
• Re: [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH BlueZ 0/2] Added config conversion tool
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH BlueZ 0/2] Added config conversion tool
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH BlueZ 0/2] Added config conversion tool
  • From: Christian Zimmermann <zimmermach@xxxxxxxxx>
• Re: [PATCH v2] Bluetooth: btrtl: Restore old logic to assume firmware is already loaded
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH BlueZ 0/2] Added config conversion tool
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH] btusb: Add shutdown routine for BTUSB_INTEL_NEW devices
  • From: raghuram.hegde@xxxxxxxxx
• [PATCH] Bluetooth: Add NULL check for tiocmget() and tiocmset()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [Bug 202429] No Bluetooth Adapter on boot - Works after woken up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202429] No Bluetooth Adapter on boot - Works after woekn up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 202429] New: No Bluetooth Adapter on boot - Works after woekn up from suspend/sleep - Intel Ac 9260
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH BlueZ 2/2] Added config converter for Bluez4 config conversion
  • From: Christian Zimmermann <zimmermach@xxxxxxxxx>
• [PATCH BlueZ 1/2] Renamed Bluez4 config read functions
  • From: Christian Zimmermann <zimmermach@xxxxxxxxx>
• [PATCH BlueZ 0/2] Added config conversion tool
  • From: Christian Zimmermann <zimmermach@xxxxxxxxx>
• Re: [PATCH] a2dp-codecs: Remove wrong definition of SBC_MAX_BITPOOL
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH v2] Bluetooth: btrtl: Restore old logic to assume firmware is already loaded
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] a2dp-codecs: Remove wrong definition of SBC_MAX_BITPOOL
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v4 1/2] Bluetooth: hci_h5: Add the Realtek compatible flags for the device tree
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: Create the file for Realtek Bluetooth serial devices
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH] a2dp-codecs & avinfo: Simplify defintions and parsing of aptX family
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] a2dp-codecs: Remove wrong definition of SBC_MAX_BITPOOL
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] avinfo: Dump unknown codecs and unknown categories
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] avinfo: Fix parsing capabilities
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: bluez: dbus method call for switching endpoint
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] tty: Fix WARNING in tty_set_termios
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] tty: Fix WARNING in tty_set_termios
  • From: Shuah Khan <shuah@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: Create the file for Realtek Bluetooth serial devices
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: Create the file for Realtek Bluetooth serial devices
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Bluetooth: btrtl: Skip initialization if firmware is already loaded
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: BlueZ 5.50: Browsing local GATT table
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [RFC BlueZ] doc/gatt-api: Add Handle property
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH 2/2] Bluetooth: Correctly annotate implicit fall through in __rfcomm_dlc_close
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• Re: [PATCH 1/2] Bluetooth: Annotate implicit fall through in l2cap_config_rsp
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• Re: [PATCH 1/2] Bluetooth: Annotate implicit fall through in l2cap_config_rsp
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: make hw_err static, reduces object code size
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v6 1/4] usb: split code locating ACPI companion into port and device
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] usb: assign ACPI companions for embedded USB devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v6 3/4] Bluetooth: Allow driver specific cmd timeout handling
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v6 4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ldisc: Fix for pty driver
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH] Bluetooth: hci_ldisc: Fix for pty driver
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Bluetooth: btrtl: Skip initialization if firmware is already loaded
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• Re: [PATCH v9 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 1/4] usb: split code locating ACPI companion into port and device
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v6 4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v6 3/4] Bluetooth: Allow driver specific cmd timeout handling
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v6 2/4] usb: assign ACPI companions for embedded USB devices
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v6 1/2] Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v6 2/2] Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v6 0/2] Bluetooth: btusb: Add protocol support for MediaTek USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [Bug 99881] 2015 Apple bluetooth keybord and magic mouse support
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v5 3/4] Bluetooth: Allow driver specific cmd timeout handling
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v5 4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH 1/2] Bluetooth: Annotate implicit fall through in l2cap_config_rsp
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• [PATCH 2/2] Bluetooth: Correctly annotate implicit fall through in __rfcomm_dlc_close
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• [PATCH] Bluetooth: make hw_err static, reduces object code size
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH 1/3] Bluetooth: btrtl: Let rtl_load_file() always return error code
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 2/3] Bluetooth: btrtl: Let btrtl_initialize() always return error code
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 3/3] Bluetooth: btrtl: Skip initialization if firmware is already loaded
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: BlueZ 5.50: Browsing local GATT table
  • From: Youssif Saeed <youssif.am.saeed@xxxxxxxxx>
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 201921] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH v9 0/3] Bug fixes for Qualcomm BT chip wcn3990.
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v9 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v9 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• [PATCH v9 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v5 3/4] Bluetooth: Allow driver specific cmd timeout handling
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH v5 1/4] usb: split code locating ACPI companion into port and device
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v5 2/4] usb: assign ACPI companions for embedded USB devices
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v5 3/4] Bluetooth: Allow driver specific cmd timeout handling
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v5 4/4] Bluetooth: btusb: Use the cmd_timeout method to reset the Intel BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH net-next] Bluetooth: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH net-next] Bluetooth: Mark expected switch fall-throughs
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH] tools/hcidump: Decode FastStream, aptX Low Latency, aptX HD and LDAC
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: Battery level of energy
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• Re: Battery level of energy
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Battery level of energy
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• Re: Cannot pair and connect headset
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: Cannot pair and connect headset
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Re: [PATCH] Bluetooth: Check L2CAP option sizes returned from l2cap_get_conf_opt
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Re: [PATCH v3 1/9] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH BlueZ] avdtp: Fix always destroying session immediatelly
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Format of HCI LE Advertising Report Event
  • From: Michał Lowas-Rzechonek <michal.lowas-rzechonek@xxxxxxxxxxx>
• Re: Format of HCI LE Advertising Report Event
  • From: Johan Hedberg <johan.hedberg@xxxxxxxxx>
• Format of HCI LE Advertising Report Event
  • From: "Michał Lowas-Rzechonek" <michal.lowas-rzechonek@xxxxxxxxxxx>
• [PATCH net-next] Bluetooth: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Cannot pair and connect headset
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• Re: [PATCH v4 1/5] usb: split code locating ACPI companion into port and device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] usb: split code locating ACPI companion into port and device
  • From: Dmitry Torokhov <dtor@xxxxxxxxxx>
• Re: [PATCH v4 5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v4 4/5] Bluetooth: btusb: Collect the common Intel assignments together
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v4 3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v4 2/5] usb: assign ACPI companions for embedded USB devices
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v4 1/5] usb: split code locating ACPI companion into port and device
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• RE: [PATCH BlueZ] mesh: Fix logic when cleaning up incomplete provisioning
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• RE: [PATCH BlueZ v2] mesh: Fix Relaying for multiple nodes
  • From: "Gix, Brian" <brian.gix@xxxxxxxxx>
• Re: [PATCH v3 1/9] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v3 1/9] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 9/9] a2dp: Add reverse discovery
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 8/9] a2dp: Add implementation of MediaEndpoint.Device
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 6/9] a2dp: Cache remote endpoints
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 7/9] doc/media-api: Add Device property to MediaEndpoint
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 5/9] doc/settings-storage: Add Endpoint group to cache
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 4/9] a2dp: Implement MediaTransport.Endpoint
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 3/9] doc/media-api: Add Endpoint property to MediaTransport
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 2/9] a2dp: Expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH v3 1/9] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH] Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: Cannot pair and connect headset
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• Re: [PATCH v5 1/2] Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] Bluetooth: btusb: fix semicolon.cocci warnings
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 1/2] Bluetooth: hci_h5: Add the Realtek compatible flags for the device tree
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: Create the file for Realtek Bluetooth serial devices
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH v4 2/2] dt-bindings: Create the file for Realtek Bluetooth serial devices
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] Bluetooth: hci_h5: Add the Realtek compatible flags for the device tree
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 1/8] doc/media-api: Enable MediaEndpoint to expose remote SEP
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Bluetooth ECDH selftest failed (endianness issue?)
  • From: Emil Lenngren <emil.lenngren@xxxxxxxxx>
• Re: [PATCH v3 1/2] Bluetooth: dt-bindings: Realtek serial bluetooth
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/8] Bluetooth: hci_h5: Add support for binding RTL8723BS with device tree
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: BlueZ 5.50: Browsing local GATT table
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: Bluetooth ECDH selftest failed (endianness issue?)
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Add a local variable to store the result of h4_recv_buf()
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] Bluetooth: dt-bindings: Realtek serial bluetooth
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 4/8] Bluetooth: hci_h5: Add support for binding RTL8723BS with device tree
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [RFC,v2] Bluetooth: hci_qca: Collect controller memory dump during SSR
  • From: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] Bluetooth: btrtl: add support for the RTL8723CS
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: BlueZ 5.50: Browsing local GATT table
  • From: Youssif Saeed <youssif.am.saeed@xxxxxxxxx>
• Re: Disconnection of signaling channel after AVDTP close
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: BlueZ 5.50: Browsing local GATT table
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• [PATCH BlueZ] avdtp: Fix always destroying session immediatelly
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• BlueZ 5.50: Browsing local GATT table
  • From: Youssif Saeed <youssif.am.saeed@xxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Cannot pair and connect headset
  • From: Grigory Fateyev <gfborn@xxxxxxxxx>
• [PATCH v3 2/2] Bluetooth: dt-bindings: Realtek serial bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] Bluetooth: dt-bindings: Realtek serial bluetooth
  • From: David Summers <beagleboard@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_uart: Add a local variable to store the result of h4_recv_buf()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• Re: [PATCH v4 2/5] usb: assign ACPI companions for embedded USB devices
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v4 1/5] usb: split code locating ACPI companion into port and device
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v4 4/5] Bluetooth: btusb: Collect the common Intel assignments together
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v4 3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: bluez: dbus method call for switching endpoint
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCHv2] Patch to add the realtek bluetooth device tree refs to the code
  • From: beagleboard@xxxxxxxxxxxxxxxxxxx
• [Bug 202345] New: bluetoothd can end up with a corrupted DBus object path
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] Bluetooth: hci_uart: Add a local variable to store the result of h4_recv_buf()
  • From: Myungho Jung <mhjungk@xxxxxxxxx>
• [PATCH BlueZ] mesh: Fix logic when cleaning up incomplete provisioning
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ v2 2/2] mesh: Add D-Bus policy for Bluetooth mesh daemon
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ v2 1/2] mesh: Rename mesh daemon executable to bluetooth-meshd
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• [PATCH BlueZ v2 0/2] Updated mesh D-Bus policy patch
  • From: Inga Stotland <inga.stotland@xxxxxxxxx>
• Re: [PATCH BlueZ] mesh: Add D-Bus policy for Bluetooth mesh daemon
  • From: "Stotland, Inga" <inga.stotland@xxxxxxxxx>
• Re: [PATCH BlueZ] mesh: Add D-Bus policy for Bluetooth mesh daemon
  • From: "Stotland, Inga" <inga.stotland@xxxxxxxxx>
• Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH BlueZ v2] mesh: Fix Relaying for multiple nodes
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• [PATCH v4 2/5] usb: assign ACPI companions for embedded USB devices
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v4 3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v4 4/5] Bluetooth: btusb: Collect the common Intel assignments together
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v4 5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v4 1/5] usb: split code locating ACPI companion into port and device
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH v5 0/2] Bluetooth: btusb: Add protocol support for MediaTek USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v5 1/2] Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• [PATCH v5 2/2] Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices
  • From: <sean.wang@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v7 4/4] Bluetooth: btqca: inject command complete event during fw download
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH BlueZ] mesh: Fix Relaying for multiple nodes
  • From: Brian Gix <brian.gix@xxxxxxxxx>
• Re: [PATCH 2/8] Bluetooth: hci_h5: Add support for reset GPIO
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH 0/8] Add support for rtl8723bs/rtl8723cs bluetooth
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>