BCM2076B1 appears to use 20:76:A0:00:56:79 as default address.
This address is used by at least 5 devices with the AMPAK AP6476
module and is also suspicious because it starts with the chip name
2076 (followed by a different revision A0 for some reason).
Add it to the list of default addresses and leave it up to the
user to configure a valid one.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
drivers/bluetooth/btbcm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index ea1a20a49f91..35394076267b 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -34,6 +34,7 @@
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
#define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
+#define BDADDR_BCM2076B1 (&(bdaddr_t) {{0x79, 0x56, 0x00, 0xa0, 0x76, 0x20}})
#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
#define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
@@ -69,6 +70,9 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
* The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller
* with no configured address.
*
+ * The address 20:76:A0:00:56:79 indicates a BCM2076B1 controller
+ * with no configured address.
+ *
* The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
* with waiting for configuration state.
*
@@ -80,6 +84,7 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
*/
if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
!bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
+ !bacmp(&bda->bdaddr, BDADDR_BCM2076B1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
!bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
!bacmp(&bda->bdaddr, BDADDR_BCM43430A0)) {
--
2.21.0
