On Sat, Jan 19, 2019 at 1:02 AM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
>
> Some boards (e.g. Pine64 and Pinebook) wire a GPIO to reset pin of
> RTL8723BS
Pine64 / Pinebook don't have the enable pin. One could say that the
enable pin and the reset pin you add here are actually the same thing.
ChenYu
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> ---
> drivers/bluetooth/hci_h5.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
> index 069d1c8fde73..7ead8c3d8657 100644
> --- a/drivers/bluetooth/hci_h5.c
> +++ b/drivers/bluetooth/hci_h5.c
> @@ -107,6 +107,7 @@ struct h5 {
> const struct h5_vnd *vnd;
> const char *id;
>
> + struct gpio_desc *reset_gpio;
> struct gpio_desc *enable_gpio;
> struct gpio_desc *device_wake_gpio;
> };
> @@ -833,6 +834,10 @@ static int h5_serdev_probe(struct serdev_device *serdev)
> if (IS_ERR(h5->device_wake_gpio))
> return PTR_ERR(h5->device_wake_gpio);
>
> + h5->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(h5->reset_gpio))
> + return PTR_ERR(h5->reset_gpio);
> +
> return hci_uart_register_device(&h5->serdev_hu, &h5p);
> }
>
> @@ -921,6 +926,9 @@ static void h5_btrtl_open(struct h5 *h5)
>
> /* The controller needs up to 500ms to wakeup */
> gpiod_set_value_cansleep(h5->enable_gpio, 1);
> + /* Take it out of reset */
> + gpiod_set_value_cansleep(h5->reset_gpio, 0);
> + msleep(100);
> gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
> msleep(500);
> }
> @@ -928,6 +936,7 @@ static void h5_btrtl_open(struct h5 *h5)
> static void h5_btrtl_close(struct h5 *h5)
> {
> gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
> + gpiod_set_value_cansleep(h5->reset_gpio, 1);
> gpiod_set_value_cansleep(h5->enable_gpio, 0);
> }
>
> --
> 2.20.1
>
