Realtek bluetooth may not work after reboot: [ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008 The power is not cut during system reboot, so the firmware is kept in Bluetooth controller. Realtek bluetooth doesn't have the ability to check firmware loading status. but the version queried by HCI_OP_READ_LOCAL_VERSION will be different if firmware is already loaded. Realtek's own fork, rtk_btusb also use this method to detect the loading status. So let's assume the firmware is already loaded when we can't find matching IC info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921 Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> --- drivers/bluetooth/btrtl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index c36f500d8313..e2f89d57dd14 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -546,9 +546,10 @@ int btrtl_initialize(struct hci_dev *hdev, hdev->bus); if (!btrtl_dev->ic_info) { - rtl_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x", - lmp_subver, hci_rev, hci_ver); - return -EINVAL; + rtl_dev_info(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x", + lmp_subver, hci_rev, hci_ver); + rtl_dev_info(hdev, "rtl: firmware may be already loaded, or it's an unsupported IC."); + return 0; } if (btrtl_dev->ic_info->has_rom_version) { @@ -621,7 +622,8 @@ int btrtl_setup_realtek(struct hci_dev *hdev) if (ret) return ret; - ret = btrtl_download_firmware(hdev, &btrtl_dev); + if (btrtl_dev.ic_info) + ret = btrtl_download_firmware(hdev, &btrtl_dev); return ret; } -- 2.17.1
