Luiz, thank you very much!
Yes, I did a lot of time, but without luck.
[bluetooth]# info 00:18:09:C5:44:1E
Device 00:18:09:C5:44:1E
Name: MDR-XB650BT
Alias: MDR-XB650BT
Class: 0x240404
Icon: audio-card
Paired: no
Trusted: yes
Blocked: no
Connected: no
LegacyPairing: no
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
[...]
> ACL Data RX: Handle 256 flags 0x02 dlen 12 [hci0] 439.668085
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 576
Source CID: 64
> HCI Event: Simple Pairing Complete (0x36) plen 7 [hci0] 439.672100
Status: Authentication Failure (0x05)
Address: 00:18:09:C5:44:1E (CRESYN)
> HCI Event: Auth Complete (0x06) plen 3 [hci0] 439.673066
Status: Authentication Failure (0x05)
Handle: 256
@ MGMT Event: Authentication Failed (0x0011) plen 8
{0x0002} [hci0] 439.673127
BR/EDR Address: 00:18:09:C5:44:1E (CRESYN)
Status: Authentication Failed (0x05)
@ MGMT Event: Authentication Failed (0x0011) plen 8
{0x0001} [hci0] 439.673127
BR/EDR Address: 00:18:09:C5:44:1E (CRESYN)
Status: Authentication Failed (0x05)
= bluetoothd: connect error: Connection refused (111)
439.774156
< HCI Command: Disconnect (0x01|0x0006) plen 3
[hci0] 441.809823
Handle: 256
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4 [hci0] 441.812119
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)
> HCI Event: Disconnect Complete (0x05) plen 4 [hci0] 441.829130
Status: Success (0x00)
Handle: 256
Reason: Connection Terminated By Local Host (0x16)
@ MGMT Event: Device Disconnected (0x000c) plen 8
ср, 23 янв. 2019 г. в 15:56, Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>:
>
> Hi Grigory,
>
> Looks like the headset is refusing to pair, perhaps because it
> believes it has already been paired, did you remove the device
> locally? Perhaps you will need to enter into pairing mode or something
> to clear the previous pairing, or you already tried that?
>
> On Wed, Jan 23, 2019 at 8:53 AM Grigory Fateyev <gfborn@xxxxxxxxx> wrote:
> >
> > There are some `btmon` logs, when I try to pair https://pastebin.com/4j7LzD2N
> >
> > PS. Sorry for top quoting!
> >
> > вт, 22 янв. 2019 г. в 10:33, Grigory Fateyev <gfborn@xxxxxxxxx>:
> > >
> > > Maybe I need to provide more information, which one? Or it's a wrong
> > > place to ask help?
> > >
> > > вс, 20 янв. 2019 г. в 17:09, Grigory Fateyev <gfborn@xxxxxxxxx>:
> > > >
> > > > Hello!
> > > >
> > > > I have a bluetooth headset SONY MDR-XB650BT and I cannot pair and connect it.
> > > >
> > > > I got it several months ago and it worked well, I configured it using
> > > > blueman-manager but now I cannot.
> > > >
> > > > Hardware:
> > > > 02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
> > > > Subsystem: Intel Corporation Dual Band Wireless-AC 7265
> > > > Kernel driver in use: iwlwifi
> > > > Kernel modules: iwlwifi
> > > >
> > > > Software:
> > > > Debian Stretch 9.6
> > > > Linux gregf 4.18.0-0.bpo.1-amd64 #1 SMP Debian 4.18.6-1~bpo9+1
> > > > (2018-09-13) x86_64 GNU/Linux
> > > > ii blueman 2.0.4-1
> > > > amd64 Graphical bluetooth manager
> > > > ii bluetooth 5.43-2+deb9u1
> > > > all Bluetooth support
> > > > ii bluez 5.43-2+deb9u1
> > > > amd64 Bluetooth tools and daemons
> > > > ii bluez-firmware 1.2-3
> > > > all Firmware for Bluetooth devices
> > > > ii bluez-hcidump 5.43-2+deb9u1
> > > > amd64 Analyses Bluetooth HCI packets
> > > > ii bluez-obexd 5.43-2+deb9u1
> > > > amd64 bluez obex daemon
> > > > ii bluez-tools 0.2.0~20140808-5+b2
> > > > amd64 Set of tools to manage Bluetooth devices for linux
> > > > ii libbluetooth3:amd64 5.43-2+deb9u1
> > > > amd64 Library to use the BlueZ Linux Bluetooth stack
> > > > ii pulseaudio-module-bluetooth 10.0-1+deb9u1
> > > > amd64 Bluetooth module for PulseAudio sound server
> > > > ii python-bluez 0.22-1
> > > > amd64 Python wrappers around BlueZ for rapid bluetooth
> > > > development
> > > >
> > > > This is part of my logs: https://pastebin.com/xPnm6SgW
> > > >
> > > > I'm trying to do it via `bluetoothctl` but get something like:
> > > > [bluetooth]# info 00:18:09:C5:44:1E
> > > > Device 00:18:09:C5:44:1E
> > > > Name: MDR-XB650BT
> > > > Alias: MDR-XB650BT
> > > > Class: 0x240404
> > > > Icon: audio-card
> > > > Paired: no
> > > > Trusted: no
> > > > Blocked: no
> > > > Connected: no
> > > > LegacyPairing: no
> > > > UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
> > > > UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
> > > > UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
> > > > UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
> > > > UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
> > > > [bluetooth]# agent on
> > > > Agent registered
> > > > [bluetooth]# trust 00:18:09:C5:44:1E
> > > > [CHG] Device 00:18:09:C5:44:1E Trusted: yes
> > > > Changing 00:18:09:C5:44:1E trust succeeded
> > > > [bluetooth]# pair 00:18:09:C5:44:1E
> > > > Attempting to pair with 00:18:09:C5:44:1E
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: yes
> > > > Failed to pair: org.bluez.Error.AuthenticationFailed
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: no
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: yes
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: no
> > > > [bluetooth]# pair 00:18:09:C5:44:1E
> > > > Attempting to pair with 00:18:09:C5:44:1E
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: yes
> > > > Failed to pair: org.bluez.Error.AuthenticationFailed
> > > > [CHG] Device 00:18:09:C5:44:1E Connected: no
> > > >
> > > > I'm sure it works but how to detect the reason why it cannot now, I
> > > > got out of my hairs. Could you help me, please?
> > > >
> > > > Thank you!
> >
> >
> >
> > --
> > --
> > Grigory
>
>
>
> --
> Luiz Augusto von Dentz
--
--
Grigory
