Re: [PATCH BlueZ 1/5] mesh: Separate functions for net key add and update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Inga,

One adjustment needed here...

On Tue, 2019-02-05 at 23:31 -0800, Inga Stotland wrote:
> This splits mesh_net_key_add() into two separate functions:
> mesh_net_key_add() and mesh_net_key_update().
> mesh_net_key_update() essentially replaces mesh_net_kr_phase_one()
> since switching to Key Refresh phase one can only be triggered
> by successful network key update.
> ---
>  mesh/cfgmod-server.c |  8 ++++++--
>  mesh/net.c           | 24 +++++++-----------------
>  mesh/net.h           |  8 ++++----
>  mesh/node.c          |  4 ++--
>  mesh/storage.c       |  2 +-
>  5 files changed, 20 insertions(+), 26 deletions(-)
> 
> diff --git a/mesh/cfgmod-server.c b/mesh/cfgmod-server.c
> index 062bdaaf2..899bdde2e 100644
> --- a/mesh/cfgmod-server.c
> +++ b/mesh/cfgmod-server.c
> @@ -981,8 +981,12 @@ static bool cfg_srv_pkt(uint16_t src, uint32_t dst,
>  		if (size != 18)
>  			return true;
>  
> -		b_res = mesh_net_add_key(net, opcode == OP_NETKEY_UPDATE,
> -						l_get_le16(pkt), pkt + 2);
> +		net_idx = l_get_le16(pkt);
> +
> +		if (opcode == OP_NETKEY_ADD)
> +			b_res = mesh_net_add_key(net, net_idx, pkt + 2);
> +		else
> +			b_res = mesh_net_update_key(net, net_idx, pkt + 2);
>  
>  		l_debug("NetKey Add/Update %s",
>  			(b_res == MESH_STATUS_SUCCESS) ? "success" : "fail");
> diff --git a/mesh/net.c b/mesh/net.c
> index 9e509a8ea..bfc1a01bb 100644
> --- a/mesh/net.c
> +++ b/mesh/net.c
> @@ -970,27 +970,13 @@ int mesh_net_del_key(struct mesh_net *net, uint16_t idx)
>  	return MESH_STATUS_SUCCESS;
>  }
>  
> -int mesh_net_add_key(struct mesh_net *net, bool update, uint16_t idx,
> -							const void *value)
> +int mesh_net_add_key(struct mesh_net *net, uint16_t idx, const uint8_t *value)
>  {
> -	int status;
>  	struct mesh_subnet *subnet;
>  
>  	subnet = l_queue_find(net->subnets, match_key_index,
>  							L_UINT_TO_PTR(idx));
>  
> -	if (update) {
> -		if (subnet && subnet->kr_phase == KEY_REFRESH_PHASE_NONE) {
> -			l_info("Start key refresh");
> -			status = mesh_net_kr_phase_one(net, idx, value);
> -			if (status == MESH_STATUS_SUCCESS &&
> -				!storage_net_key_add(net, idx,
> -						value, KEY_REFRESH_PHASE_ONE))
> -				return MESH_STATUS_STORAGE_FAIL;
> -		} else
> -			return MESH_STATUS_CANNOT_UPDATE;
> -	}
> -
>  	if (subnet) {
>  		if (net_key_confirm(subnet->net_key_cur, value))
>  			return MESH_STATUS_SUCCESS;
> @@ -3570,7 +3556,7 @@ uint8_t mesh_net_key_refresh_phase_get(struct mesh_net *net, uint16_t idx,
>  	return MESH_STATUS_SUCCESS;
>  }
>  
> -int mesh_net_kr_phase_one(struct mesh_net *net, uint16_t idx,
> +int mesh_net_update_key(struct mesh_net *net, uint16_t idx,
>  							const uint8_t *value)
>  {
>  	struct mesh_subnet *subnet;
> @@ -3580,7 +3566,8 @@ int mesh_net_kr_phase_one(struct mesh_net *net, uint16_t idx,
>  
>  	subnet = l_queue_find(net->subnets, match_key_index,
>  							L_UINT_TO_PTR(idx));
> -	if (!subnet)
> +
> +	if (!subnet || !subnet->kr_phase == KEY_REFRESH_PHASE_NONE)
>  		return MESH_STATUS_CANNOT_UPDATE;


We need to allow for "Update" calls where we have already entered Phase 1, but the Config
Client did not recieve our Net Key Status (response) message.  We have a function we use in Net Key Add
net_key_confirm() that checks to see if this is a valid but redundandt call, so that we
can accept it (and respond) without changing state. 

>  
>  	if (subnet->net_key_upd) {
> @@ -3606,6 +3593,9 @@ int mesh_net_kr_phase_one(struct mesh_net *net, uint16_t idx,
>  
>  	l_info("key refresh phase 1: Key ID %d", subnet->net_key_upd);
>  
> +	if (!storage_net_key_add(net, idx, value, KEY_REFRESH_PHASE_ONE))
> +		return MESH_STATUS_STORAGE_FAIL;
> +
>  	subnet->kr_phase = KEY_REFRESH_PHASE_ONE;
>  
>  	return MESH_STATUS_SUCCESS;
> diff --git a/mesh/net.h b/mesh/net.h
> index 0ef01b63e..b27a4e614 100644
> --- a/mesh/net.h
> +++ b/mesh/net.h
> @@ -280,8 +280,10 @@ bool mesh_net_set_relay_mode(struct mesh_net *net, bool enable, uint8_t cnt,
>  							uint8_t interval);
>  bool mesh_net_set_friend_mode(struct mesh_net *net, bool enable);
>  int mesh_net_del_key(struct mesh_net *net, uint16_t net_idx);
> -int mesh_net_add_key(struct mesh_net *net, bool update,
> -					uint16_t net_idx, const void *key);
> +int mesh_net_add_key(struct mesh_net *net, uint16_t net_idx,
> +							const uint8_t *key);
> +int mesh_net_update_key(struct mesh_net *net, uint16_t net_idx,
> +							const uint8_t *key);
>  uint32_t mesh_net_get_iv_index(struct mesh_net *net);
>  void mesh_net_get_snb_state(struct mesh_net *net,
>  					uint8_t *flags, uint32_t *iv_index);
> @@ -335,8 +337,6 @@ uint8_t mesh_net_key_refresh_phase_set(struct mesh_net *net, uint16_t net_idx,
>  							uint8_t transition);
>  uint8_t mesh_net_key_refresh_phase_get(struct mesh_net *net, uint16_t net_idx,
>  							uint8_t *phase);
> -int mesh_net_kr_phase_one(struct mesh_net *net, uint16_t net_idx,
> -							const uint8_t *key);
>  int mesh_net_key_refresh_phase_two(struct mesh_net *net, uint16_t net_idx);
>  int mesh_net_key_refresh_finish(struct mesh_net *net, uint16_t net_idx);
>  void mesh_net_send_seg(struct mesh_net *net, uint32_t key_id,
> diff --git a/mesh/node.c b/mesh/node.c
> index e921b72b7..1845f9a32 100644
> --- a/mesh/node.c
> +++ b/mesh/node.c
> @@ -1726,8 +1726,8 @@ bool node_add_pending_local(struct mesh_node *node, void *prov_node_info,
>  	if (!mesh_db_write_device_key(node->jconfig, info->device_key))
>  		return false;
>  
> -	if (mesh_net_add_key(node->net, kr, info->net_index,
> -			info->net_key) != MESH_STATUS_SUCCESS)
> +	if (mesh_net_add_key(node->net, info->net_index, info->net_key) !=
> +							MESH_STATUS_SUCCESS)
>  		return false;
>  
>  	if (!storage_net_key_add(node->net, info->net_index, info->net_key,
> diff --git a/mesh/storage.c b/mesh/storage.c
> index 3a6614eb2..1b52000b0 100644
> --- a/mesh/storage.c
> +++ b/mesh/storage.c
> @@ -120,7 +120,7 @@ static bool read_net_keys_cb(uint16_t idx, uint8_t *key, uint8_t *new_key,
>  	if (!net)
>  		return false;
>  
> -	if (mesh_net_add_key(net, false, idx, key) != MESH_STATUS_SUCCESS)
> +	if (mesh_net_add_key(net, idx, key) != MESH_STATUS_SUCCESS)
>  		return false;
>  	/* TODO: handle restoring key refresh phase and new keys */
>  




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux