Linux ARM MSM

• Thread Index

• Re: [PATCH RESEND 6/7] clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 03/17] media: qcom: camss: Start to move to module compat matched resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [REBASE PATCH v5 06/17] soc: qcom: Add Qualcomm APSS minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [REBASE PATCH v5 06/17] soc: qcom: Add Qualcomm APSS minidump kernel driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 00/17] Add Qualcomm Minidump kernel driver related support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: nand: qcom: Fix the node for nand unmap resource
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH 2/9] arm64: dts: qcom: msm8916/39: Disable GPU by default
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [REBASE PATCH v5 05/17] init: export linux_banner data variable
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH RFT 01/20] media: venus: pm_helpers: Only set rate of the core clock in core_clks_enable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/9] arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v5 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [REBASE PATCH v5 16/17] firmware: qcom_scm: Refactor code to support multiple download mode
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v5 16/17] media: qcom: camss: Propagate vfe_reset error up the callstack
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v5 07/17] soc: qcom: minidump: Add pending region registration
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v5 15/17] firmware: scm: Modify only the download bits in TCSR register
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write function
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 15/17] firmware: scm: Modify only the download bits in TCSR register
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write function
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 2/9] arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 0/9] drm: ci: fixes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 00/17] Add Qualcomm Minidump kernel driver related support
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v5 11/17] qcom_minidump: Register ramoops region with minidump
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v3 2/9] arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v3 3/9] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v3 8/8] drm/drm-file: Show finer-grained BO sizes in drm_show_memory_stats
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: sm8550-qrd: add bluetooth support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 1/2] arm64: dts: qcom: sm8550: add UART14 nodes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 0/2] arm64: dts: qcom: enable BT on SM8550-QRD
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V8 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.5 30/36] arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v5 11/17] qcom_minidump: Register ramoops region with minidump
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [PATCH 4/6] phy: qualcomm: phy-qcom-qmp-ufs: Move data structs and setting tables to header
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 1/6] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 3/6] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 2/2] scsi: ufs: ufs-qcom: Rename "hs_gear" to "phy_gear"
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: [PATCH v5 09/17] pstore/ram: Use dynamic ramoops reserve resource
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v5 08/17] arm64: mm: Add dynamic ramoops region support through command line
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] mfd: Explicitly include correct DT includes
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v2] dt-bindings: usb: connector: disallow additional properties
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH] mfd: Explicitly include correct DT includes
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v2] dt-bindings: usb: connector: disallow additional properties
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 2/3] pinctrl: qcom: Add SM4450 pinctrl driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v6 14/18] media: verisilicon: vp9: Use destination buffer height to compute chroma offset
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• [PATCH v5 08/17] arm64: mm: Add dynamic ramoops region support through command line
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 10/17] pstore: Add pstore_region_defined() helper and export it
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 11/17] qcom_minidump: Register ramoops region with minidump
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 15/17] firmware: scm: Modify only the download bits in TCSR register
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 12/17] MAINTAINERS: Add entry for minidump related files
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 16/17] firmware: qcom_scm: Refactor code to support multiple download mode
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 17/17] firmware: qcom_scm: Add multiple download mode support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write function
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 14/17] pinctrl: qcom: Use qcom_scm_io_update_field()
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 06/17] soc: qcom: Add Qualcomm APSS minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 09/17] pstore/ram: Use dynamic ramoops reserve resource
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 07/17] soc: qcom: minidump: Add pending region registration
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 04/17] remoteproc: qcom: Remove minidump related data from qcom_common.c
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 05/17] init: export linux_banner data variable
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 02/17] soc: qcom: Add qcom_rproc_minidump module
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 01/17] docs: qcom: Add qualcomm minidump guide
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 00/17] Add Qualcomm Minidump kernel driver related support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v5 03/17] remoteproc: qcom_q6v5_pas: Use qcom_rproc_minidump()
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] cpufreq: qcom-nvmem: add support for IPQ8064
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 3/3] cpufreq: qcom-nvmem: add support for IPQ8064
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v3 1/3] cpufreq: qcom-nvmem: add support for IPQ8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 8/8] drm/drm-file: Show finer-grained BO sizes in drm_show_memory_stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH RESEND 6/7] clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 2/8] drm/panfrost: Enable cycle counter register upon job submission
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] drm/panfrost: Enable cycle counter register upon job submission
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 4/4] clk: qcom: Add GCC driver support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: clock: qcom: Add GCC clocks for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH v2 2/4] clk: qcom: rpmh: Add RPMH clocks support for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: clock: qcom: Add RPMHCC for SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• [PATCH v2 0/4] clk: qcom: Add support for GCC and RPMHCC on SM4450
  • From: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
• Re: [PATCH v14 3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v14 4/9] soc: qcom: cpr: Move common functions to new file
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-samsung-j5-common: Add accelerometer
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: qcom: Fix the node for nand unmap resource
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 27/28] usb: typec: qcom-pmic-typec: register drm_bridge
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2] drm/msm/dpu: try multirect based on mdp clock limits
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: enable smartdma on sm8350
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 1/2] drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v4 0/2] Avoid spurious freezer wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v4 1/2] sched/core: Remove ifdeffery for saved_state
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [PATCH 2/2] drm/msm/dpu: try multirect based on mdp clock limits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v3] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.15 04/13] arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 06/31] arm64: dts: qcom: sm6125-sprout: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: enable smartdma on sm8350
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH AUTOSEL 6.1 06/22] arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 08/31] arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 03/13] arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 02/13] arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 05/22] arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 04/22] arm64: dts: qcom: sm6350: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 03/22] arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 25/31] arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 07/31] arm64: dts: qcom: sm6350: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 05/31] arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 30/36] arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 09/31] arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 25/36] drm/msm/adreno: Use quirk to identify cached-coherent support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 24/36] drm/msm/adreno: Use quirk identify hw_apriv
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 09/36] arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 08/36] arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 07/36] arm64: dts: qcom: sm6350: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 05/36] arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 06/36] arm64: dts: qcom: sm6125-sprout: correct ramoops pmsg-size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/2] drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 8/9] drm: ci: Enable new jobs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 9/9] drm: ci: Use scripts/config to enable/disable configs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 6/9] arm64: defconfig: Enable DA9211 regulator
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 7/9] drm: ci: Update xfails
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 5/9] drm: ci: Enable regulator
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 4/9] drm: ci: virtio: Update ci variables
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 3/9] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 2/9] arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 1/9] drm: ci: igt_runner: Remove todo
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v3 0/9] drm: ci: fixes
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: sm4450: Add RPMH and Global clock controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] scsi: ufs: ufs-qcom: Rename "hs_gear" to "phy_gear"
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/2] scsi: ufs: ufs-qcom: Update PHY settings only when scaling to higher gears
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: sm4450: Add RPMH and Global clock controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iommu/arm-smmu-qcom: NULL pointer check for driver data
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v6 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH] soc: qcom: add ADSP PDCharger ULOG driver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] mtd: nand: qcom: Fix the node for nand unmap resource
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 16/17] media: qcom: camss: Propagate vfe_reset error up the callstack
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 12/17] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 12/17] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 11/17] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 07/17] media: qcom: camss: Pass CAMSS subdev callbacks via resource ops pointer
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 02/17] media: qcom: camss: Rename camss struct resources to camss_subdev_resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] scsi: ufs: qcom: dt-bindings: Add MCQ ESI property
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: qcom: Add SM4450 pinctrl driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 07/13] coresight-tpdm: Add nodes to set trigger timestamp and type
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 2/3] interconnect: qcom: Add SM4450 interconnect provider driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interconnect: Add Qualcomm SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: add uart console support for SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 2/3] interconnect: qcom: Add SM4450 interconnect provider driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: add uart console support for SM4450
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: mfd: qcom,tcsr: Add compatible for sm4450
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: firmware: document Qualcomm SM4450 SCM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interconnect: Add Qualcomm SM4450
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-m31: Fix error code in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: sm4450: Add RPMH and Global clock controller
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: add uart console support for SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 0/5] drm/msm: cleanup private obj handling
  • From: "Maxime Ripard" <mripard@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 3/6] dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: firmware: document Qualcomm SM4450 SCM
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 2/6] dt-bindings: mfd: qcom,tcsr: Add compatible for sm4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 0/6] soc: qcom: Add uart console support for SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v6 4/4] PCI: epf-mhi: Add support for handling D-state notify from EPC
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 3/4] PCI: qcom-ep: Print D-state name to distinguish D3hot/D3cold
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 2/4] PCI: qcom-ep: Add support for D-state change notification
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 1/4] PCI: endpoint: Add D-state change notifier support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 0/4] PCI: endpoint: add D-state change notifier support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH 3/3] arm64: defconfig: enable interconnect for SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 2/3] interconnect: qcom: Add SM4450 interconnect provider driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: interconnect: Add Qualcomm SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 0/3] interconnect: qcom: Add SM4450 interconnect driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 2/3] pinctrl: qcom: Add SM4450 pinctrl driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 3/3] arm64: defconfig: Enable pinctrl for SM4450
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 0/3] pinctl: qcom: Add SM4450 pinctrl driver
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH] iommu/arm-smmu-qcom: NULL pointer check for driver data
  • From: Aravind Vijayakumar <quic_aprasann@xxxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI: endpoint: Add D-state change notifier support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] PCI: qcom-ep: Update the D-state log
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI: endpoint: Add D-state change notifier support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH 4/5] drm/msm/mdp5: migrate SMP dumping to using atomic_print_state
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/5] drm/msm/mdp5: drop global_state_lock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/5] drm/msm/dpu: drop global_state_lock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/5] drm/msm/dpu: finalise global state object
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/5] drm/msm: cleanup private obj handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/5] drm/atomic: add private obj state to state dump
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v8 11/13] coresight-tpdm: Add nodes for timestamp request
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 0/2] Add qcom hvc/shmem transport
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: support setting the DP subconnector type
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: support setting the DP subconnector type
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: skip validity check for DP CTS EDID checksum
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dp: support setting the DP subconnector type
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 3/3] firmware: Add support for Qualcomm UEFI Secure Application
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/4] OPP: Add api to retrieve opps which is at most the provided level
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] phy: qcom-m31: Fix error code in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v3 0/4] sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v3 1/4] dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 08/10] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ9574
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v5 0/5] PCI: qcom: Add support for OPP
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v4 13/17] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 09/17] media: qcom: camss: Remove special case for VFE get/put
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v8 10/13] coresight-tpdm: Add nodes to configure pattern match output
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v5 3/5] opp: Add dev_pm_opp_find_level_floor()
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH] phy: qcom-m31: Fix error code in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v4 05/17] media: qcom: camss: Pass remainder of variables as resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 07/17] media: qcom: camss: Pass CAMSS subdev callbacks via resource ops pointer
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 06/10] cpufreq: qti: Enable cpufreq for ipq53xx
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 07/10] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 15/17] media: qcom: camss: Move vfe_disable into a common routine where applicable
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 02/17] media: qcom: camss: Rename camss struct resources to camss_subdev_resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 10/17] media: qcom: camss: Untangle if/else spaghetti in camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 14/17] media: qcom: camss: Support RDI3 for VFE 17x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 16/17] media: qcom: camss: Propagate vfe_reset error up the callstack
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 12/17] media: qcom: camss: Functionally decompose CSIPHY clock lookups
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 17/17] media: qcom: camss: Comment CSID dt_id field
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 11/17] media: qcom: camss: Allow clocks vfeN vfe_liteN or vfe_lite
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 08/17] media: qcom: camss: Assign the correct number of RDIs per VFE
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 06/17] media: qcom: camss: Pass line_num from compat resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 00/17] media: qcom: camss: Add parameter passing to remove several outstanding bugs
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 03/17] media: qcom: camss: Start to move to module compat matched resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 04/17] media: qcom: camss: Pass icc bandwidth table as a platform parameter
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 01/17] media: qcom: camss: Amalgamate struct resource with struct resource_ispif
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] mtd: nand: qcom: Fix the node for nand unmap resource
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v5 4/5] PCI: qcom: Return error from 'qcom_pcie_icc_update'
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v1 06/10] cpufreq: qti: Enable cpufreq for ipq53xx
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v5 5/5] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] Add qcom hvc/shmem transport
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v11 03/13] usb: xhci: Move extcaps related macros to respective header file
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/10] clk: qcom: clk-alpha-pll: introduce stromer plus ops
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 07/10] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v1 10/10] arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 03/10] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v1 05/10] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ5332
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH] phy: qcom-m31: Fix error code in probe()
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v1 06/10] cpufreq: qti: Enable cpufreq for ipq53xx
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 02/10] clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: pci: qcom: Add opp table
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add qcom hvc/shmem transport
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v1 09/10] cpufreq: qti: Introduce cpufreq for ipq95xx
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v1 01/10] clk: qcom: clk-alpha-pll: introduce stromer plus ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 11/32] sound: usb: card: Introduce USB SND platform op callbacks
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v8 09/13] coresight-tpdm: Add nodes for dsb edge control
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: clk-alpha-pll: Use determine_rate instead of round_rate
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 4/4] PCI: qcom: Add OPP support for speed based performance state of RPMH
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] firmware: qcom_scm: disable SDI if required
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add qcom hvc/shmem transport
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v4 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 04/11] media: videobuf2: Stop define VB2_MAX_FRAME as global
  • From: Hsia-Jun Li <Randy.Li@xxxxxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v1 03/10] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/5] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: pci: qcom: Add opp table
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v1 09/10] cpufreq: qti: Introduce cpufreq for ipq95xx
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 10/10] arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 08/10] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 07/10] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 06/10] cpufreq: qti: Enable cpufreq for ipq53xx
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 05/10] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ5332
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 04/10] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 03/10] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 02/10] clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 00/10] Enable cpufreq for IPQ5332 & IPQ9574
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v1 01/10] clk: qcom: clk-alpha-pll: introduce stromer plus ops
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v3 04/11] media: videobuf2: Stop define VB2_MAX_FRAME as global
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 4/6] drm/msm: add a kernel param to select between MDP5 and DPU drivers
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: support binding to the mdp5 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: support binding to the mdp5 devices
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/8] drm/msm/dpu: enable PINGPONG TE operations only when supported by HW
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/6] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] drm/msm/dpu: enable INTF TE operations only when supported by HW
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 6/8] drm/msm/dpu: drop DPU_INTF_TE feature flag
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 7/8] drm/msm/dpu: drop useless check from dpu_encoder_phys_cmd_te_rd_ptr_irq()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 8/8] drm/msm/dpu: move INTF tearing checks to dpu_encoder_phys_cmd_init
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 4/8] drm/msm/dpu: inline _setup_intf_ops()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 3/8] drm/msm/dpu: drop the DPU_PINGPONG_TE flag
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/8] drm/msm/dpu: enable PINGPONG TE operations only when supported by HW
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] drm/msm/dpu: inline _setup_pingpong_ops()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: clk-alpha-pll: Use determine_rate instead of round_rate
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 3/5] drm/msm: add trailing newlines to drm_dbg msgs
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 3/5] drm/msm: add trailing newlines to drm_dbg msgs
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• Re: [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: Disconnect interrupt generation for QC targets when role switch is enabled
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [GIT PULL, v2] Add soft link for Audio topology firmware for SC8280XP X13s platform
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [GIT PULL] Add soft link for Audio topology firmware for SC8280XP X13s platform
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/53] dt-bindings: interconnect: qcom,bcm-voter: Add qcom,bcm-voter-idx
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/53] icc-rpmh multi-RSC voting groundwork
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/6] arm64: dts: qcom: sm8550-qrd: use correct UFS supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PULL] qcom: firmware updates for the sm8250 / RB5 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PULL] qcom: firmware for Qualcomm Robotics RB1 and RB2 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: sm8450-hdk: add UFS host controller supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: sm8350-mtp: add UFS host controller supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: sm8350-hdk: add UFS host controller supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: sm8450-qrd: add UFS host controller supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: qrb2210-rb1: Hook up USB3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/5] arm64: dts: qcom: qrb2210-rb1: Swap UART index
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: qcom: qrb2210-rb1: Enable remote processors
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: qrb2210-rb1: Fix regulators
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/5] arm64: dts: qcom: qrb2210-rb1: Swap UART index
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sm8350-mtp: add UFS host controller supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: sm8350-hdk: add UFS host controller supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: sm8550-qrd: use correct UFS supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: sm8450-hdk: add UFS host controller supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: sm8450-qrd: add UFS host controller supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 8/9] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/12] arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max current
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/12] arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max current
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/12] arm64: dts: qcom: sm4250-billie2: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 11/12] arm64: dts: qcom: msm8998-sagit: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 10/12] arm64: dts: qcom: msm8998-oneplus: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 09/12] arm64: dts: qcom: msm8998-mtp: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/12] arm64: dts: qcom: msm8998-pro1: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 07/12] arm64: dts: qcom: msm8996-gemini: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 05/12] arm64: dts: qcom: apq8096-db820c: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/12] arm64: dts: qcom: msm8996-oneplus: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 04/12] arm64: dts: qcom: sm6115p-j606f: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 02/12] arm64: dts: qcom: sm6125-sprout: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 03/12] arm64: dts: qcom: sm6115-pro1x: correct UFS pad supply
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 01/12] arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max current
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RESEND 7/7] arm64: dts: qcom: include the GPLL0 as clock provider for IPQ mailbox
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 2/5] arm64: dts: qcom: qrb2210-rb1: Fix regulators
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RESEND 7/7] arm64: dts: qcom: include the GPLL0 as clock provider for IPQ mailbox
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 13/13] coresight-tpdm: Add nodes for dsb msr support
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: qrb2210-rb1: Fix regulators
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/5] arm64: dts: qcom: qrb2210-rb1: Swap UART index
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: qrb2210-rb1: Enable remote processors
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: qrb2210-rb1: Add GPIO LEDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: qrb2210-rb1: Hook up USB3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/5] RB1 features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 11/13] coresight-tpdm: Add nodes for timestamp request
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 8/8] drm/drm-file: Show finer-grained BO sizes in drm_show_memory_stats
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 5/7] dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 7/8] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 4/4] phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/4] phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/4] phy: qcom-qmp-usb: move PCS v6 register to the proper header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/4] phy: qcom-qmp-combo: correct sm8550 PHY programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/8] drm/panfrost: Enable cycle counter register upon job submission
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] drm/panfrost: Add fdinfo support GPU load metrics
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: clk-alpha-pll: Use determine_rate instead of round_rate
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/8] drm/panfrost: Enable debugfs toggling of cycle counter register
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/8] drm/panfrost: Enable cycle counter register upon job submission
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: branch: Add mem ops support for branch2 clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH RESEND 0/7] Add GPLL0 as clock provider for the Qualcomm's IPQ mailbox controller
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 7/7] arm64: dts: qcom: include the GPLL0 as clock provider for IPQ mailbox
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 6/7] clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 5/7] dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 4/7] clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 3/7] clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 2/7] clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 1/7] clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH RESEND 0/7] Add GPLL0 as clock provider for the Qualcomm's IPQ mailbox controller
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 1/8] drm/msm/dpu: populate SSPP scaler block version
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PULL] qcom: firmware updates for the sm8250 / RB5 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] ath10k/WCN3990: move wlanmdsp to qcom/sdm845
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PULL] qcom: firmware for Qualcomm Robotics RB1 and RB2 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 6/6] drm/drm-file: Allow size unit selection in drm_show_memory_stats
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFT PATCH 2/2] arm64: dts: qcom: msm8996-xiaomi: fix missing clock populate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFT PATCH 1/2] arm64: dts: qcom: apq8096-db820c: fix missing clock populate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 4/4] clk: qcom: add clock controller driver for qca8386/qca8084
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/4] clk: qcom: branch: Add clk_branch2_prepare_ops
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 3/4] clk: qcom: common: commonize qcom_cc_really_probe
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: clk-alpha-pll: Use determine_rate instead of round_rate
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v12 0/6] iommu/dma: s390 DMA API conversion and optimized IOTLB flushing
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH v3 4/8] drm/panfrost: Add fdinfo support GPU load metrics
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 1/8] drm/panfrost: Add cycle count GPU register definitions
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 2/8] drm/panfrost: Enable cycle counter register upon job submission
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 5/8] drm/panfrost: Add fdinfo support for memory stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 6/8] drm/drm_file: Add DRM obj's RSS reporting function for fdinfo
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 8/8] drm/drm-file: Show finer-grained BO sizes in drm_show_memory_stats
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdx75-idp: align RPMh regulator nodes with bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 7/8] drm/panfrost: Implement generic DRM object RSS reporting function
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH v3 0/8] Add fdinfo support to Panfrost
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH 12/12] arm64: dts: qcom: sm4250-billie2: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/8] drm/panfrost: Enable debugfs toggling of cycle counter register
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• [PATCH 07/12] arm64: dts: qcom: msm8996-gemini: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/6] drm/msm: add a kernel param to select between MDP5 and DPU drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/6] drm/msm/dpu: support binding to the mdp5 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/6] drm/msm: provide migration path from MDP5 to DPU driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/6] drm/msm/dpu: add support for SDM660 and SDM630 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Add qcom hvc/shmem transport
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH 06/12] arm64: dts: qcom: msm8996-oneplus: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/6] drm/msm/dpu: Add MSM8996 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/6] drm/msm/mdss: fix highest-bank-bit for msm8998
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 11/12] arm64: dts: qcom: msm8998-sagit: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 03/12] arm64: dts: qcom: sm6115-pro1x: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 00/12] arm64: dts: qcom: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Add qcom hvc/shmem transport
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 02/12] arm64: dts: qcom: sm6125-sprout: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdx75-idp: align RPMh regulator nodes with bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 10/12] arm64: dts: qcom: msm8998-oneplus: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 01/12] arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max current
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 04/12] arm64: dts: qcom: sm6115p-j606f: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 08/12] arm64: dts: qcom: msm8998-pro1: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 05/12] arm64: dts: qcom: apq8096-db820c: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 09/12] arm64: dts: qcom: msm8998-mtp: correct UFS pad supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH 04/11] arm64: dts: qcom: pm7250b: make SID configurable
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: Add compatibles for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH 2/2] interconnect: qcom: Add SDX75 interconnect provider driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH V8 4/5] scsi: ufs: qcom: Align programing of unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/4] sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [RESEND,PATCH 2/2] firmware: qcom: scm: disable SDI on IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH] crypto: qcom-rng: Add hwrng support
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• [PATCH v2 0/5] Add USB Support on Qualcomm's SDX75 Platform
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH V2] crypto: qcom-rng - Add hw_random interface support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: Add SDX75 interconnect provider driver
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/2] Fix tcsr_mutex register for IPQ6018
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v10 06/11] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH V8 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V8 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: ipq5018: Correct uart1_pins pinconf
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v6 17/18] media: v4l2: Add DELETE_BUFS ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH] crypto: qcom-rng: Add hwrng support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 5/8] drm/msm/dpu: drop DPU_HW_SUBBLK_INFO macro
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 7/8] drm/msm/dpu: merge DPU_SSPP_SCALER_QSEED3, QSEED3LITE, QSEED4
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v2 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH V2] crypto: qcom-rng - Add hw_random interface support
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v3 8/8] drm/msm/gpu: drop duplicating VIG feature masks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 2/8] drm/msm/dpu: drop the `id' field from DPU_HW_SUBBLK_INFO
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 0/8] drm/msm/dpu: simplify DPU sub-blocks info
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: interconnect: Add compatibles for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v3 6/8] drm/msm/dpu: drop the dpu_caps::qseed_type field
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 1/8] drm/msm/dpu: populate SSPP scaler block version
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/4] sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH 0/2] Add interconnect driver for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 0/5] Add USB Support on Qualcomm's SDX75 Platform
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH V8 3/5] scsi: ufs: qcom: Add support to Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] hwspinlock: qcom: Drop unused qcom,ipq6018-tcsr-mutex
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: ipq6018: Fix tcsr_mutex register size
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: Add compatibles for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 2/4] remoteproc: qcom: pas: Add sc7180 adsp
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v2 2/2] hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v8 09/13] coresight-tpdm: Add nodes for dsb edge control
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH v2 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 10/13] coresight-tpdm: Add nodes to configure pattern match output
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v6 17/18] media: v4l2: Add DELETE_BUFS ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH v3 3/8] drm/msm/dpu: drop the `smart_dma_priority' field from struct dpu_sspp_sub_blks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sc7180: Add ADSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 17/18] media: v4l2: Add DELETE_BUFS ioctl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
• Re: [PATCH v6 17/18] media: v4l2: Add DELETE_BUFS ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH v4 1/2] irqchip/qcom-pdc: Add support for v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: Add SDX75 interconnect provider driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V8 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v3 4/8] drm/msm/dpu: deduplicate some (most) of SSPP sub-blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V8 1/5] scsi: ufs: qcom: Update MAX_CORE_CLK_1US_CYCLES for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH v4 0/2] irqchip/qcom-pdc: support v3.2 HW
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH V2] clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequencies
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 12/15] media: qcom: camss: Fix support for setting CSIPHY clock name csiphyX
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V7 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] hwspinlock: qcom: Drop unused qcom,ipq6018-tcsr-mutex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Fix tcsr_mutex register for IPQ6018
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: ipq8074: Fix hwlock index for SMEM
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: ipq6018: Fix hwlock index for SMEM
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: ipq5332: Fix hwlock index for SMEM
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 0/4] Fix SMEM hwlock index for IPQ platforms
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom: Add NOTIFY_FATAL event type to SSR subdevice
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• [PATCH v2 7/7] drm: ci: Use scripts/config to enable/disable configs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 6/7] drm: ci: Enable new jobs
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 5/7] drm: ci: Update xfails
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 4/7] drm: ci: Enable configs to fix mt8173 boot hang issue
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 3/7] drm: ci: virtio: update ci variables
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 2/7] drm: ci: Force db410c to host mode
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 1/7] drm: ci: igt_runner: remove todo
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• [PATCH v2 0/7] drm: ci: fixes
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] hwspinlock: qcom: Drop unused qcom,ipq6018-tcsr-mutex
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: msm8916-samsung-j5-common: Add accelerometer
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: firmware: Add documentation for qcom,platform-parts-info
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Fix hwlock index for SMEM for IPQ platforms
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] hwspinlock: qcom: Drop unused qcom,ipq6018-tcsr-mutex
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/3] Fix tcsr_mutex register for IPQ6018
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Fix hwlock index for SMEM for IPQ platforms
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC PATCH v1 00/12] drm,usb/typec: uABI for USB-C DisplayPort connectors
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v1 00/12] drm,usb/typec: uABI for USB-C DisplayPort connectors
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC PATCH v1 06/12] soc: qcom: pmic_glink_altmode: fix DRM connector type
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 00/18] Add DELETE_BUF ioctl
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH V7 3/5] scsi: ufs: qcom: Add support to Configure PA_VS_CORE_CLK_40NS_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 5/5] scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 4/5] scsi: ufs: qcom: Align programing of unipro clk attributes
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 1/5] scsi: ufs: qcom: Update MAX_CORE_CLK_1US_CYCLES for UFS V4 and above
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V7 0/5] scsi: ufs: qcom: Align programming sequence as per HW spec
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v6 11/18] media: videobuf2: Be more flexible on the number of queue stored buffers
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v6 02/18] media: videobuf2: Stop spamming kernel log with all queue counter
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v6 11/18] media: videobuf2: Be more flexible on the number of queue stored buffers
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 4/7] crypto: qcom-rng - Add support for trng
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH V6 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH V6 4/6] scsi: ufs: qcom: Align unipro clk attributes configuration as per HPG
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] drm/msm/dpu: move INTF tearing checks to dpu_encoder_phys_cmd_ini
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>