On 06/09/2023 09:58, Dmitry Baryshkov wrote:
Make sure that we use only v6 registers in qmp_v6_usb3phy_regs_layout.
Why that if the registers are the same as v5 ?
Neil
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++++++------
drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 2 ++
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 4 ++++
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bff6231d7de3..9c71a132afea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -194,14 +194,14 @@ static const unsigned int qmp_v5_5nm_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
};
static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
- [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
- [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
- [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
+ [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
/* In PCS_USB */
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
[QPHY_COM_RESETSM_CNTRL] = QSERDES_V6_COM_RESETSM_CNTRL,
[QPHY_COM_C_READY_STATUS] = QSERDES_V6_COM_C_READY_STATUS,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
index 7c16af0b1cc3..0d0089898240 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -8,6 +8,8 @@
/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
#define QPHY_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00
+#define QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x08
+#define QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x14
#define QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18
#define QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c
#define QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
index c95d3fabd108..496c36522e55 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
@@ -7,6 +7,10 @@
#define QCOM_PHY_QMP_PCS_V6_H_
/* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_SW_RESET 0x000
+#define QPHY_V6_PCS_PCS_STATUS1 0x014
+#define QPHY_V6_PCS_POWER_DOWN_CONTROL 0x040
+#define QPHY_V6_PCS_START_CONTROL 0x044
#define QPHY_V6_PCS_LOCK_DETECT_CONFIG1 0x0c4
#define QPHY_V6_PCS_LOCK_DETECT_CONFIG2 0x0c8
#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3 0x0cc
