Re: [PATCH 2/2] interconnect: qcom: Add SDX75 interconnect provider driver

[Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>]

On 9/5/2023 12:32 PM, Krzysztof Kozlowski wrote:
> On 05/09/2023 06:59, Rohit Agarwal wrote:
> > Add driver for the Qualcomm interconnect buses found in SDX75.
> >
> > Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ...
>
> > +
> > +static struct qcom_icc_bcm *system_noc_bcms[] = {
> Please do not copy your code from downstream, but work on upstream. We
> changed this long time ago, so you clearly used some old or obsolete
> file as template.
Sure will check the sm8550 as template and work on it again.
Thank you for your time.

Thanks,
Rohit.
> > +	&bcm_ce0,
> > +	&bcm_cn0,
> > +	&bcm_sn0,
> > +	&bcm_sn1,
> > +	&bcm_sn2,
> > +};
> > +
> > +static struct qcom_icc_node *system_noc_nodes[] = {
> > +	[MASTER_AUDIO] = &qhm_audio,
> > +	[MASTER_GIC_AHB] = &qhm_gic,
> > +	[MASTER_PCIE_RSCC] = &qhm_pcie_rscc,
> > +	[MASTER_QDSS_BAM] = &qhm_qdss_bam,
> > +	[MASTER_QPIC] = &qhm_qpic,
> > +	[MASTER_QUP_0] = &qhm_qup0,
> > +	[MASTER_ANOC_SNOC] = &qnm_aggre_noc,
> > +	[MASTER_GEM_NOC_CNOC] = &qnm_gemnoc_cnoc,
> > +	[MASTER_GEM_NOC_PCIE_SNOC] = &qnm_gemnoc_pcie,
> > +	[MASTER_SNOC_CFG] = &qnm_system_noc_cfg,
> > +	[MASTER_PCIE_ANOC_CFG] = &qnm_system_noc_pcie_cfg,
> > +	[MASTER_CRYPTO] = &qxm_crypto,
> > +	[MASTER_IPA] = &qxm_ipa,
> > +	[MASTER_MVMSS] = &qxm_mvmss,
> > +	[MASTER_EMAC_0] = &xm_emac_0,
> > +	[MASTER_EMAC_1] = &xm_emac_1,
> > +	[MASTER_QDSS_ETR] = &xm_qdss_etr0,
> > +	[MASTER_QDSS_ETR_1] = &xm_qdss_etr1,
> > +	[MASTER_SDCC_1] = &xm_sdc1,
> > +	[MASTER_SDCC_4] = &xm_sdc4,
> > +	[MASTER_USB3_0] = &xm_usb3,
> > +	[SLAVE_ETH0_CFG] = &ps_eth0_cfg,
> > +	[SLAVE_ETH1_CFG] = &ps_eth1_cfg,
> > +	[SLAVE_AUDIO] = &qhs_audio,
> > +	[SLAVE_CLK_CTL] = &qhs_clk_ctl,
> > +	[SLAVE_CRYPTO_0_CFG] = &qhs_crypto_cfg,
> > +	[SLAVE_IMEM_CFG] = &qhs_imem_cfg,
> > +	[SLAVE_IPA_CFG] = &qhs_ipa,
> > +	[SLAVE_IPC_ROUTER_CFG] = &qhs_ipc_router,
> > +	[SLAVE_CNOC_MSS] = &qhs_mss_cfg,
> > +	[SLAVE_ICBDI_MVMSS_CFG] = &qhs_mvmss_cfg,
> > +	[SLAVE_PCIE_0_CFG] = &qhs_pcie0_cfg,
> > +	[SLAVE_PCIE_1_CFG] = &qhs_pcie1_cfg,
> > +	[SLAVE_PCIE_2_CFG] = &qhs_pcie2_cfg,
> > +	[SLAVE_PCIE_RSC_CFG] = &qhs_pcie_rscc,
> > +	[SLAVE_PDM] = &qhs_pdm,
> > +	[SLAVE_PRNG] = &qhs_prng,
> > +	[SLAVE_QDSS_CFG] = &qhs_qdss_cfg,
> > +	[SLAVE_QPIC] = &qhs_qpic,
> > +	[SLAVE_QUP_0] = &qhs_qup0,
> > +	[SLAVE_SDCC_1] = &qhs_sdc1,
> > +	[SLAVE_SDCC_4] = &qhs_sdc4,
> > +	[SLAVE_SPMI_VGI_COEX] = &qhs_spmi_vgi_coex,
> > +	[SLAVE_TCSR] = &qhs_tcsr,
> > +	[SLAVE_TLMM] = &qhs_tlmm,
> > +	[SLAVE_USB3] = &qhs_usb3,
> > +	[SLAVE_USB3_PHY_CFG] = &qhs_usb3_phy,
> > +	[SLAVE_A1NOC_CFG] = &qns_a1noc,
> > +	[SLAVE_DDRSS_CFG] = &qns_ddrss_cfg,
> > +	[SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf,
> > +	[SLAVE_SNOC_CFG] = &qns_system_noc_cfg,
> > +	[SLAVE_PCIE_ANOC_CFG] = &qns_system_noc_pcie_cfg,
> > +	[SLAVE_IMEM] = &qxs_imem,
> > +	[SLAVE_SERVICE_PCIE_ANOC] = &srvc_pcie_system_noc,
> > +	[SLAVE_SERVICE_SNOC] = &srvc_system_noc,
> > +	[SLAVE_PCIE_0] = &xs_pcie_0,
> > +	[SLAVE_PCIE_1] = &xs_pcie_1,
> > +	[SLAVE_PCIE_2] = &xs_pcie_2,
> > +	[SLAVE_QDSS_STM] = &xs_qdss_stm,
> > +	[SLAVE_TCU] = &xs_sys_tcu_cfg,
> > +};
> > +
> > +static struct qcom_icc_desc sdx75_system_noc = {
> Come on... we fixed it.
>
> There could be more issues because you used old file as template. Start
> from scratch from new file.
>
> Best regards,
> Krzysztof