Re: [PATCH RESEND 6/7] clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6.09.2023 06:56, Kathiravan Thirumoorthy wrote:
> While the kernel is booting up, APSS PLL will be running at 800MHz with
> GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
> configured and select the rate based on the opp table and the source will
> be changed to APSS_PLL_EARLY.
> 
> Without this patch, CPU Freq driver reports that CPU is running at 24MHz
> instead of the 800MHz.
> 
> Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux