Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/09/2023 06:43, Rohit Agarwal wrote:
> Add support for USB3 QMP PHY found in SDX75 platform.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---



>  
> +static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
> +	.lanes			= 1,
> +	.offsets		= &qmp_usb_offsets_v5,
> +
> +	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
> +	.serdes_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
> +	.tx_tbl			= sdx75_usb3_uniphy_tx_tbl,
> +	.tx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
> +	.rx_tbl			= sdx75_usb3_uniphy_rx_tbl,
> +	.rx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
> +	.pcs_tbl		= sdx75_usb3_uniphy_pcs_tbl,
> +	.pcs_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
> +	.pcs_usb_tbl		= sdx75_usb3_uniphy_pcs_usb_tbl,
> +	.pcs_usb_tbl_num	= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
> +	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v5_usb3phy_regs_layout,
> +	.pcs_usb_offset		= 0x1000,
> +
> +	.has_pwrdn_delay	= true,
> +

Stray blank line

> +};
> +
>  static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
>  	.lanes			= 2,
>  
> @@ -1985,6 +2141,7 @@ static int qmp_usb_init(struct phy *phy)
>  	void __iomem *dp_com = qmp->dp_com;
>  	int ret;
>  
> +

No need for this.

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux