[PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to schematics the VCCQ2 supply is not connected and the L3G
regulator instead powers up the controller pads (VDD_PX10).  Use correct
supply vdd-hba and drop unsupported current limit for the vdd-hba.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index f29cce5186ac..91aa37ecb259 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -797,8 +797,7 @@ &ufs_mem_hc {
 	vcc-max-microamp = <1300000>;
 	vccq-supply = <&vreg_l1g_1p2>;
 	vccq-max-microamp = <1200000>;
-	vccq2-supply = <&vreg_l3g_1p2>;
-	vccq2-max-microamp = <100>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
 
 	status = "okay";
 };
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux