On Wed, 06 Sep 2023 12:47:39 +0200, Krzysztof Kozlowski wrote:
> According to schematics the VCCQ2 supply is not connected and the L3G
> regulator instead powers up the controller pads (VDD_PX10). Use correct
> supply vdd-hba and drop unsupported current limit for the vdd-hba.
>
>
Applied, thanks!
[1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
commit: 5c72cb3a9a96a5103cba49a1c8f2a2c71b158ab6
[2/6] arm64: dts: qcom: sm8550-qrd: use correct UFS supply
commit: e485c6e19ae888761d9fc65353722afa0235bbb4
[3/6] arm64: dts: qcom: sm8450-hdk: add UFS host controller supply
commit: f5688b4914fa5c5b9a0fca1692b82d25ae6cee33
[4/6] arm64: dts: qcom: sm8450-qrd: add UFS host controller supply
commit: ebad126daf0c70a054b358e276cef453b2fcdc7f
[5/6] arm64: dts: qcom: sm8350-hdk: add UFS host controller supply
commit: 2c20c75d850574c727e07e615ed55e3d5c2b42db
[6/6] arm64: dts: qcom: sm8350-mtp: add UFS host controller supply
commit: 201cd8541673f9b553508c2f11dadfab7874addd
Best regards,
--
Bjorn Andersson <andersson@xxxxxxxxxx>
