Re: [PATCH V3 2/2] phy: qcom-qmp-ufs: Add Phy Configuration support for SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/08/2023 12:17, Nitin Rawat wrote:
Add SC7280 specific register layout and table configs.

Co-developed-by: Manish Pandey <quic_mapa@xxxxxxxxxxx>
Signed-off-by: Manish Pandey <quic_mapa@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 142 ++++++++++++++++++++++++
  1 file changed, 142 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 3927eba8e468..514fa14df634 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

[skipped tables programming]

4),
@@ -888,6 +993,40 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
  	.regs			= ufsphy_v5_regs_layout,
  };

+static const struct qmp_phy_cfg sc7280_ufsphy_cfg = {
+	.lanes                  = 2,
+
+	.offsets                = &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes         = sm8150_ufsphy_serdes,
+		.serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
+		.tx             = sc7280_ufsphy_tx,
+		.tx_num         = ARRAY_SIZE(sc7280_ufsphy_tx),
+		.rx             = sc7280_ufsphy_rx,
+		.rx_num         = ARRAY_SIZE(sc7280_ufsphy_rx),
+		.pcs            = sc7280_ufsphy_pcs,
+		.pcs_num        = ARRAY_SIZE(sc7280_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes         = sm8150_ufsphy_hs_b_serdes,
+		.serdes_num     = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx             = sm8250_ufsphy_hs_g4_tx,
+		.tx_num         = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
+		.rx             = sc7280_ufsphy_hs_g4_rx,
+		.rx_num         = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx),
+		.pcs            = sm8150_ufsphy_hs_g4_pcs,
+		.pcs_num        = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+	},
+	.clk_list               = sm8450_ufs_phy_clk_l,
+	.num_clks               = ARRAY_SIZE(sm8450_ufs_phy_clk_l),

This doesn't correspond to the bindings. This array has 3 enries, while in the bindings you have opted for two clocks for this PHY.

+	.vreg_list              = qmp_phy_vreg_l,
+	.num_vregs              = ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs                   = ufsphy_v4_regs_layout,
+};
+
  static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
  	.lanes			= 2,

@@ -1648,6 +1787,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
  	}, {
  		.compatible = "qcom,sa8775p-qmp-ufs-phy",
  		.data = &sa8775p_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sc7280-qmp-ufs-phy",
+		.data = &sc7280_ufsphy_cfg,
  	}, {
  		.compatible = "qcom,sc8180x-qmp-ufs-phy",
  		.data = &sm8150_ufsphy_cfg,
--
2.17.1


--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux