On 6.09.2023 06:56, Kathiravan Thirumoorthy wrote: > While the kernel is booting up, APSS PLL will be running at 800MHz with > GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be > configured to the rate based on the opp table and the source also will be > changed to APSS_PLL_EARLY. > > Also, dynamic scaling of CPUFreq is not supported on IPQ5332, so to switch > between the frequencies we need to park the APSS PLL in safe source, > here it is GPLL0 and then shutdown and bring up the APSS PLL in the > desired rate. So this patch is preparatory one to enable the CPUFreq on > IPQ5332. > > Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx> > --- Please split this. Somebody reverting this in the future will have a hard time resolving conflicts. Konrad
